Guest

Cisco 2500 Series Wireless Controllers

Field Notice: FN - 63770 - WLC21XX, WLC44XX, WiSM Might Fail to Boot Up After a Software Upgrade or Power Cycle – Fix on Failure

Field Notice: FN - 63770 – WLC21XX, WLC44XX, WiSM Might Fail to Boot Up After a Software Upgrade or Power Cycle – Fix on Failure

March 3, 2014


NOTICE:

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Revision History

Revision Date Comment
1.0
03-MAR-2014
Initial Public Release

Products Affected

Products Affected
WS-SVC-WISM-1-K9(=)
WS-SVC-WISM-1-K9-DC(=) 
WS-SVC-WISM2-K9 
WS-C6509-E-WISM 
AIR-WLC2106-K9 
AIR-WLC2112-K9 
AIR-WLC2125-K9 
AIR-N-WLC440225K9
AIR-WLC4402-12-K9 
WS-C3750G-24WS-S25
WS-C3750G-24WS-S50 
AIR-WLC4404-100-K9 
AIR-WLC4402-25-C4K 
AIR-WLC4402-25-K9  
AIR-WLC4402-50-K9 

Problem Description

WLC21XX, WLC44XX, and WiSM might fail to boot up after a software upgrade or other user actions where the unit requires a power cycle operation.

Background

Cisco has been working with some customers on an issue related to memory components manufactured by a single supplier between 2005 and 2010. These memory components are widely used across the industry and are included in a number of Cisco products. 

Although the majority of Cisco products using these components are experiencing field failure rates below expected levels, some components may fail earlier than anticipated. A handful of our customers have recently experienced a higher number of failures, leading us to change our approach to managing this issue. 

While other vendors have chosen to address this issue in different ways, Cisco believes its approach is the best course of action for its customers. Despite the cost, we are demonstrating that we always make customer satisfaction a top priority. Customers can learn more about this topic at Memory Component Issue web page.

PLEASE NOTE - The products listed in this Field Notice have lower than expected failure rates. This assessment is based on actual usage of affected memory components, observed field failure rates and product replacements since 2012. 

A degraded component will not affect the ongoing operation of a device, but will be exposed by a subsequent power cycle event. This event will result in a hard failure of the device, which cannot be recovered by a reboot or additional power cycle. For these reasons, additional caution is recommended for operational activities requiring the simultaneous power cycling of multiple devices. This issue has been observed most commonly on devices that have been in service for 24 months or more. 

Problem Symptoms

If the suspected product has been in operation for approximately 24 months, the product hardware might fail to boot up due to memory failure during a power cycle event. This is caused by one or more of these actions:

  • Upgrade the software
  • Reboot the system
  • Power cycle

Note: This issue does not affect units while the boards are in operation. The unit failure might occur after one or more of the actions listed are executed.

These product symptoms are observed:

    The AP does not boot
    The status LED is solid orange

Workaround/Solution

Fix on Failure Replacement Guidelines: Request RMA product through normal service support channels.

How To Identify Hardware Levels

Enter the show inventory command in order to obtain the Product ID (PID). If the CLI is not available, physically inspect the device in order to locate the PID.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Cisco Notification Service—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.