Guest

Cisco Video Surveillance 2600 Series IP Cameras

Cisco Video Surveillance 2621V IP Dome

  • Viewing Options

  • PDF (194.7 KB)
  • Feedback
The Cisco ® Video Surveillance 2621V IP Dome is a feature-rich digital camera designed to provide superior performance in a wide variety of video surveillance applications. The camera employs H.264 compression of up to 30 frames per second (fps) at D1 NTSC resolution (720 x 480) or 25 fps at D1 PAL resolution (720 x 576), offering efficient network utilization while providing high-quality video. This vandal-resistant dome is designed to be deployed indoors. With its open, standards-based design, the camera provides an ideal platform for operation as an independent device or as part of a Cisco Video Surveillance network.
Figure 1 shows the Cisco Video Surveillance 2621V IP Dome.

Figure 1. Cisco Video Surveillance 2621V IP Dome

fig_01.jpg
The Cisco Video Surveillance 2621V IP Dome offers a variety of benefits, including:

Optimal imaging efficiency. The 2621V IP Dome can stream video using H.264 compression, reducing network traffic and storage requirements while providing superior image quality.

Motorized focus and zoom. The lens on the 2621V IP Dome allows the focus and zoom to be controlled remotely, greatly simplifying installations and field of view adjustments.

Wide dynamic range. The camera employs powerful digital imaging technology, allowing it to capture high-quality images in a wide variety of lighting conditions. It uses a progressive scan image sensor with global electronic shuttering to ensure natural color rendition, zero blooming and smear, and minimal motion blurring.

Dual streaming. The camera can deliver two simultaneous video streams over the network. A combination of H.264, MPEG4, and MJPEG can be configured. Each video stream can be configured with individual resolution, quality, and frame rate settings.

Flexible power options. The camera supports Power over Ethernet (PoE) 802.3af, and 12 VDC or 24 VAC power through an optional external power supply.

Mounting options. The camera is designed specifically for indoor mounting onto various surfaces. Mounting options include using the conduit case, pendant cap, or a standard electrical junction box. The camera is equipped with a motorized varifocal lens mounted to a manual pan and tilt mechanism that allows the camera to be rotated and placed at the proper angle. The optional conduit base accessory (CIVS-IPCA-1006=) can be used when mounting in an environment that requires an IP-66 rating.

Dome options. The 2621V IP Dome comes standard with a smoked dome. A clear dome is available as an optional accessory.

Day/night operation. The camera provides true day/night operation and includes an IR filter that switches to night mode in low-light scenes. This function can be set to manual or automatic control.

Embedded security and networking. The camera provides 802.1X authentication and supports IP Multicast for enhanced bandwidth management.

Event notification. The camera can examine designated areas in the video for motion activity and then notify users or other applications when it detects activity that exceeds a predefined threshold.

Bidirectional audio.* The camera supports full-duplex audio, and options for half-duplex operation.

Note: Features with an asterisk are not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

Features

Table 1 describes the features of the Cisco Video Surveillance 2621V IP Dome.

Table 1. Cisco Video Surveillance 2621V IP Dome Features

Item

Specification

Imaging Device

1/3-in. progressive-scanRGB CMOSsensor with wide dynamic range

Image Control

Automatic white balance (AWB), automatic gain control (AGC), automatic exposure (AE), auto iris

Dynamic Range

102 dBtypical/120 dB maximum

Minimum Illumination

• Color mode: F1.4 @ 0.65 lux
• Black and white mode: F1.4 @ 0.08 lux

Signal-to-Noise Ratio (SNR)

>48 dB

Shutter

Electronic shutter

Lens

Motorized DC auto-iris lens with day/night filter

3.3mm-12mm

Zoom: 3.6x

Field of view:

• Horizontal: 24°-90°
• Vertical: 18°-64°

Camera Angle Adjustment

Pan: 340°

Tilt: 160°

Rotation: 200°

Video Compression

H.264, MPEG-4, MJPEG

Audio Compression*

G.711 A-Law, G.711 U-Law, G.726

Resolution and Frame Rate

• NTSC/PAL
• 720 x 480/576 @ 30/25 fps (D1)
• 704 x 480/576 @ 30/25 fps (4CIF)
• 352 x 240/288 @ 30/25 fps (CIF)

Video Streaming

Single and dual video streams supported. Refer to Tables 2, 3, and 4 for details.

Protocols

Dynamic Host Control Protocol (DHCP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS), Network Time Protocol (NTP), Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP), Simple Mail Transfer Protocol (SMTP), Secure Sockets Layer/Transport Layer Security (SSL/TLS), Transmission Control Protocol/Internet Protocol (TCP/IP), 802.1x

Quality of Service (QoS)

Differentiated services code point (DSCP) marking

Power

• 12 VDC or 24 VAC, isolated external power supply
• PoE (802.3af) @ 48V/0.3A

Power Consumption

11W (maximum)

* Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.
Table 2 lists supported single stream configurations on the Cisco Video Surveillance 2621V IP Dome.

Table 2. Supported Single Stream Configurations

Single Streaming

Maximum Resolution and Frames Per Second (FPS)

Resolutions Supported
(NTSC & PAL)

NTSC

FPS Supported

PAL FPS Supported

H.264

D1 @ 30 fps

D1

4CIF

CIF

30, 25, 20, 15, 10, 8, 6, 5

25, 20, 15, 10, 8, 6, 5

MPEG-4

D1 @ 30 fps

D1

4CIF

CIF

30, 25, 20, 15, 10, 8, 6, 5

25, 20, 15, 10, 8, 6, 5

MJPEG

D1 @ 30 fps

D1

4CIF

CIF

30, 25, 20, 15, 10, 8, 6, 5

25, 20, 15, 10, 8, 6, 5

Table 3 lists the supported primary and secondary video stream combinations on the Cisco Video Surveillance 2621V IP Dome.

Table 3. Supported Primary and Secondary Video Stream Combinations

Primary

Secondary

H.264

H.264

H.264

MJPEG

MPEG4

MPEG4

MPEG4

MJPEG

Table 4 lists the supported primary and secondary video streams on the Cisco Video Surveillance 2621V IP Dome.

Table 4. Cisco Video Surveillance 2621V IP Dome Video Stream Support

NTSC Primary
Channel Resolutions

NTSC Primary Frame Rate

NTSC Secondary
Channel Resolutions

NTSC Secondary Frame Rate*

4 CIF, CIF

30, 25, 20, 15, 10, 8, 6, 5

CIF

15, 10, 8, 6, 5

PAL Primary
Channel Resolutions

PAL Primary Frame Rate

PAL Secondary
Channel Resolutions

PAL Secondary Frame Rate*

4 CIF, CIF

25, 20, 15, 10, 8, 6, 5

CIF

15, 10, 8, 6, 5

* If a secondary frame rate is selected in Cisco Video Surveillance Manager that is not listed in the table, the camera will automatically use the closest frame rate.

Connectors

Table 5 describes the connectors on the Cisco Video Surveillance 2621V IP Dome.

Table 5. Cisco Video Surveillance 2621V IP Dome Connectors

Item

Specification

Network Connectivity

10/100 BASE-TX Ethernet with RJ-45 connector

Video

3.5-mm service connector, provides analog video (use with optional mini cable with BNC adapter during installation)

Audio*

• 3.5-mm audio jack: audio input for optional external microphone and audio output for optional external speaker supported through Y-cable adapter
• Two-way (full- and half-duplex), one-way, or audio off

Alarm Input

Two logic-level programmable inputs

Alarm Output*

Two logic-level programmable outputs

Power Input

3-pin terminal

* Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

Software

Table 6 describes the primary features of the Cisco Video Surveillance 2611 IP Dome software.

Table 6. Cisco Video Surveillance 2621V IP Dome Primary Software Features

Item

Specification

Video Format

NTSC and PAL

Day/night Settings

Auto or manual day/night operation with user-definable thresholds

Image Settings

Configurable brightness, sharpness, saturation, and white balance

Overlay Capabilities

Time, date, and text

Selectable Bit Rate

Support for Constant Bit Rate or Variable Bit Rate

IP Filtering

Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings

Discovery*

Cisco Discovery Protocol, Bonjour zero-configuration discovery

Configuration

• Browser-based using Internet Explorer 8 with SP3
• Multiple user access levels with password protection

Motion Detection

4 user-definable motion detection areas

Event Actions

• Email
• FTP upload of captured video or JPEG snapshot depending on stream configuration
• HTTP alert
• Alarm output

* Not supported or applicable when the camera is used with Cisco Video Surveillance Manager.

Specifications

Table 7 provides specifications of the Cisco Video Surveillance 2621V IP Dome.

Table 7. Cisco Video Surveillance 2621V IP Dome Mechanical Specifications

Item

Specification

Housing

Metal base and polycarbonate transparent cover with tamper-resistant mounting

LEDs

Power and Ethernet

Dimensions
(W x H)

6.10 x 4.64 in.

155 x 118 mm

Weight

3.1 lb

1.4 kg

Standards Compliance

Safety:

UL 60950

CAN/CSA-C22.2 No. 60950

EN 60950

IEC 60950

AS/NZS 60950

EMC-Emissions:

47CFR Part 15 (CFR 47) Class B

AS/NZS CISPR22 Class B

CISPR22 Class B

EN55022 Class B

ICES003 Class B

VCCI Class B

EN61000-3-2

EN61000-3-3

KN22 Class B

CNS13438 Class B

EMC-Immunity:

EN55024

CISPR24

EN50130-4

KN24

Operating Temperature

0° to 50°C

32° to 122°F

Figure 2 shows the dimensions of the Cisco Video Surveillance 2621V IP Dome.

Figure 2. Cisco Video Surveillance 2621V IP Dome Dimensions

fig_02.jpg

Package Contents

Table 8 describes the items that ship with the Cisco Video Surveillance 2621V IP Dome.

Table 8. Cisco Video Surveillance 2621V IP Dome Package Contents

Item

Cisco Video Surveillance 2621VIP Dome

Quick start guide

Regulatory compliance and safety information

• Mounting template
• 0.9-mm Allen wrench for locking/unlocking the lens focus ring
• Torx security wrench for tamper-resistance screws
• 8-32 x 5/16" screws (qty. 4)
• Security wire and screw

Availability

The Cisco Video Surveillance 2621V IP Dome is available through Cisco Authorized Distributors.

Ordering Information

Table 9 lists the part numbers for the Cisco Video Surveillance 2621V IP Dome and accessories.

Table 9. Cisco Video Surveillance 2621V IP Dome Ordering Information

Part Number

Description

CIVS-IPC-2621

Cisco Video Surveillance Standard-Definition IP Dome, 3.3-12 mm, D/N, smoked, vandal-resistant

Accessories

CIVS-IPCA-1004=

Dome, Clear, 2500 and 2600 Series

CIVS-IPCA-1005=

Dome, Smoked, 2500 and 2600 Series

CIVS-IPCA-1006=

Conduit base with extra gaskets, 2500 and 26xxV Series

CIVS-IPCA-1007=

Ceiling mount support

CIVS-IPCA-1010=

Pendant cap, 2500 and 26xxV Series

CIVS-IPCA-1011=

Wall mount for use with CIVS-IPCA-1010

CIVS-IPCA-1012=

Ceiling mount for use with CIVS-IPCA-1010

CIVS-IPCA-1013=

Pendant cap adapter (3/4" to 1.5" male NPT thread)

CIVS-IPCA-1014=

Round pole mount adapter for use with wall mount

CIVS-IPCA-1017=

Audio/video cables

CIVS-IPCA-1018=

Sun shield

Using the Camera with Cisco Video Surveillance Manager

Features that are marked with an asterisk (*) are not supported when using the camera with Cisco Video Surveillance Manager. Please refer to the latest release notes for Cisco Video Surveillance Manager for more information.

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, visit Cisco Technical Support Services or Cisco Advanced Services.

For More Information

For more information about Cisco Video Surveillance solutions, visit http://www.cisco.com/en/US/products/ps6712/index.html or contact your local account representative.