Guest

Cisco Physical Access Manager

End-of-Sale and End-of-Life Announcement for the Cisco Physical Access Manager Appliance

  • Viewing Options

  • PDF (124.0 KB)
  • Feedback

EOL7405

Cisco announces the end-of-sale and end-of life dates for the Cisco® Physical Access Manager Appliance. The last day to order the affected product(s) is August 16, 2011. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco Physical Access Manager Appliance

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

February 15, 2011

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

August 16, 2011

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

November 14, 2011

End of SW Maintenance Releases Date:
HW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

August 15, 2012

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

August 15, 2012

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

August 15, 2012

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

November 11, 2015

Last Date of Support:
HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

August 31, 2016

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

CIAC-PAME-1125-K9

Cisco Physical Access Manager Appliance

CIVS-MSP-1RU

1RU MSP Assembly

-

Product Migration Options

Customers are encouraged to migrate to the Cisco Physical Security Multiservices Platform. Information about this product can be found at: http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6918/ps9145/ps9152/data_sheet_c78-490683.html. Note: Order the CIVS-MSP-1RU Multiservices Platform (MPS) server,power cable,and hard drive,and the Cisco Physical Access Manager software option.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html.
Customers may be able to continue to purchase the Cisco Physical Access Manager Appliance through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For More Information

For more information about the Cisco Physical Security Multiservices Platform, visit http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6918/ps9145/ps9152/data_sheet_c78-490683.html, or contact your local account representative.
To request information about the Cisco Physical Security Multiservices Platform, send an e-mail to physec-questions@cisco.com.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html.

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.