This document provides installation instructions for Unified CCE 12.5(2) ES30. It also contains a list of Unified CCE issues resolved by this engineering special. Review all installation information before installing the product. Failure to install this engineering special as described can result in inconsistent Unified CCE behavior.
This document contains these sections:
In the Product Alert Tool,
you can set up profiles
to receive email notification of new Field Notices,
Product Alerts, or End of Sale information for your selected products.
The Product Alert Tool is available at
https://www.cisco.com/cisco/support/notifications.html.
The functionality delivered as part of this patch is Session ID based Authentication and Authorization for Diagnostic Portico and Account lockout provision for
You need to configure the Account Lock Policy in the Active Directory to enable the Account lockout feature.
For example you can configure the Account Lockout Policy to lock the Active Directory user accounts for 30 minutes after three incorrect password attempts on the above applications.
For more information, see https://learn.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/account-lockout-policy . For instructions about how to configure the account lockout feature, see https://learn.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/how-to-configure-security-policy-settings.
Note: Before installing this engineering special, it is recommended to uninstall any existing installations of ES25 and ES27.
This section lists the Unified CCE components on which you can and cannot install this engineering special.
You can install Unified CCE 12.5(2) ES30 on these Unified CCE components:
Do not install this engineering special on any components other than the following:
Note: Remove patches in the reverse order of their installation. For example, if you installed patches 3, then 5, then 10 for a product, you must uninstall patches 10, 5, and 3, in that order, to remove the patches from that product.
This section provides a list of significant Unified CCE defects resolved by this engineering special. It contains these subsections:
Note: You can view more information on and track individual Unified CCE defects using the Cisco Bug Search tool, located at: https://bst.cloudapps.cisco.com/bugsearch/search?null.
This section lists caveats specifically resolved by Unified CCE 12.5(2) ES30.
Caveats in this section are ordered by Unified CCE component, severity, and then identifier.
| Identifier | Severity | Component | Headline |
|---|---|---|---|
| CSCwf92949 | 2 | aw.tools | Domain Manager failed to open |
| CSCwf38385 | 4 | aw.tools | Unable to access List Tools after installing 12.5.2 ES25 |
| CSCwe78531 | 6 | tools | Session ID based Authentication and Authorization with Account lockout provision -Diagnostic Portico |
Caveats are ordered by severity then defect number.
Defect Number: CSCwf92949
Component: aw.tools
Severity: 2
Headline: Domain Manager failed to open
Defect Number: CSCwf38385
Component: aw.tools
Severity: 4
Headline: Unable to access List Tools after installing 12.5.2 ES25
Defect Number: CSCwe78531
Component: tools
Severity: 6
Headline: Session ID based Authentication and Authorization with Account lockout provision -Diagnostic Portico
| Identifier | Severity | Component | Headline |
|---|---|---|---|
| CSCwc63341 | 2 | tools | Diagnostic framework page is blank for domain user (part of admin group) after upgrading to 12.5.2 |
| CSCwd88024 | 2 | tools | Diagnostic framework page is blank for domain user (part of config group) after upgrading to 12.5.2 |
| CSCwc98312 | 6 | tools | Impact of Chrome deprecating Private Network Access on CCE |
| CSCwc03577 | 3 | dbconfig | Location synch from call manager requires site to be added |
| CSCwc86569 | 3 | dbconfig | tomcat identifying the server as pcce instead of ucce |
| CSCwd69981 | 3 | dbconfig | Change in DN from SPOG/CCE page reloads all configuration of sip.properties in CVP |
| CSCwe18009 | 3 | dbconfig | Multiple Import API requests sent in the same second, results in error - duplicate key constraint |
| CSCwf21364 | 2 | web.config.api | JVM Out Of Memory due to caching too many copies of same X509 certificates |
| CSCwe61101 | 3 | web.config.ui | cloudconnect registration status wrongly shown as not registered when CC is 12.6.2 |
| CSCwe07211 | 3 | web.config.ui | CVA and Smartlicense page not loading after CVP/VVB ES instillation or upgrade |
| CSCwe62869 | 2 | smart-licensing | PCCE Flex licensing system goes out of compliance due to dialer port statistics |
| CSCvx79603 | 3 | scripteditor | Script Editor does not start after modifying feature control set on a SE node |
| CSCwd78479 | 3 | scripteditor | Internet Script Editor (ISE) getting into upgrade loop due to missing iBuildInfo.dll |
You can access current Cisco documentation on the Support pages at the following sites:
To provide comments about this document, send an email message to the following address:
contactcenterproducts_docfeedback@cisco.com
We appreciate your comments.
Cisco.com is a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC site.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. You can also resolve technical issues with online technical support and download software packages. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
The Cisco TAC site is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to https://www.cisco.com/c/en/us/support/index.html.
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC site to quickly find answers to your questions.
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following site: https://mycase.cloudapps.cisco.com/create/start/
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following sites:
P1 and P2 level problems are defined as follows: