This document provides installation instructions for Unified CCE 11.6(1) ES17. It also contains a list of Unified CCE issues resolved by this engineering special. Review all installation information before installing the product. Failure to install this engineering special as described can result in inconsistent Unified CCE behavior.
This document contains these sections:
In the Product
Alert Tool, you can set up profiles to receive email notification of new
Field Notices, Product Alerts, or End of Sale information for your selected
products.
The Product
Alert Tool is available at https://www.cisco.com/cisco/support/notifications.html.
This Engineering Special should be installed on a Router node for 11.6(1).
You can install Unified CCE 11.6(1) ES17 on these Unified CCE components.
Do not install this engineering special on the following components:
Installation of this patch requires the all ICM services to be
shut down during the entire period of installation. It is always recommended to
install this ES during a scheduled downtime.
·
Using the ICM Service Control, stop all the ICM
services running on the system
·
Launch the Installer provided for and following
the instructions on the screen
To
uninstall this patch, go to Control Panel.
Select
"Add or Remove Programs".
Find
the installed patch in the list and select "Remove".
Note: Remove patches in the reverse order of their installation. For example, if you installed patches 3, then 5, then 10 for a product, you must uninstall patches 10, 5, and 3, in that order, to remove the patches from that product.
It is recommended to install ES11 which is related to ES17.
Install order is not significant i.e. ES11 can be applied on top ES17.
Note: You can view more information on and track individual Unified CCE defects using the Cisco Bug Search tool, located at: https://bst.cloudapps.cisco.com/bugsearch/search?null.
This section lists caveats specifically resolved by Unified CCE 11.6(1) ES17.
Identifier |
Severity |
Component |
Headline |
CSCvh73223 |
2 |
Router |
AppGateway Asserts if an ECC Variable is
Deleted. |
Defect Number: CSCvh73223
Component: Router
Severity: 2
Headline: AppGateway Asserts if an ECC Variable is Deleted.
Symptom:
Application Gateway Process in ICM Router Crashes
Conditions: Deleting or Updating an ECC Variable
Workaround: NA
Further Problem Description: None.
You can access current Cisco documentation on the Support pages at the following sites:
To provide comments about this document, send an email message to the following address:
contactcenterproducts_docfeedback@cisco.com
We appreciate your comments.
Cisco.com is a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC site.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. You can also resolve technical issues with online technical support and download software packages. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
The Cisco TAC site is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to https://www.cisco.com/c/en/us/support/index.html.
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC site to quickly find answers to your questions.
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following site: https://mycase.cloudapps.cisco.com/create/start/
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following sites:
P1 and P2 level problems are defined as follows: