SNTP Settings

The switch can be configured to synchronize its system clock with an SNTP server specified on the SNTP Settings page.

To specify an SNTP server by name, you must first configure the DNS servers on the switch and enable the Main Clock Source (SNTP Servers) on the System Time page.

To add a SNTP server, complete the following steps:

Procedure

Step 1

Click Administration > Time Settings > SNTP Settings .

Step 2

Enter the following information:

  • Host Definition—Select whether to specify the SNTP server by IPv4 address or by host name.

  • SNTP Server IP Address/Name—Enter the IPv4 address or hostname of the SNTP server.

Step 3

Click Apply. The SNTP server is added, and the Running Configuration is updated