Discovery Bonjour

As a Bonjour client, the device broadcasts Bonjour Discovery protocol packets to directly connected IP subnets. The device can be discovered by a network management system or other third-party applications. By default, Bonjour is enabled on the Management VLAN.

To configure Bonjour, follow these steps:

Procedure

Step 1

Click Administration > Discovery - Bonjour.

Step 2

Check Enable to enable Bonjour Discovery globally.

Step 3

Click Apply to update the Running Configuration file.

Note	When Bonjour is enabled, it sends Bonjour Discovery packets to interfaces with IP addresses associated with Bonjour on the Bonjour Discovery Interface Control table.