The Events page displays the log of events (actions) that occurred. Two types of events can be logged: Log or Log and Trap. The action in the event is performed when the event is bound to an alarm and the conditions of the alarm have occurred.
Procedure
| Step 1 | Click Status and Statistics > RMON > Events. |
| Step 2 | Click Add. |
| Step 3 | Enter the parameters:
-
Event Entry—Displays the event entry index number for the new entry.
-
Community—Enter the SNMP community string to be included when traps are sent (optional).
-
Description—Entera name for the event. This name is used in the Add RMON Alarm page to attach an alarm to an event.
-
Notification Type—Select the type of action that results from this event. Values are:
-
None—No action occurs when the alarm goesoff.
-
Log (Event Log Table)—Add a log entry to the Event Log table when the alarm istriggered.
-
Trap (SNMP Manager and Syslog Server—Send a trap to the remote log server when the alarm goes off.
-
Log and Trap—Add a log entry to the Event Log table and send a trap to the remote log server when the alarm goes off.
-
Owner—Enter the device or user that defined the event.
|
| Step 4 | Click Apply.The RMON event is saved to the Running Configuration file. |
| Step 5 | Click Event Log Table to display the log of alarms that have occurred and that have been logged (see description below). |