Remark Interface

Use the Remark Interface Settings page to remark the CoS/802.1p priority, IP precedence, and DSCP value for egress traffic on a port. The CoS/802.1p priority and IP or the CoS/802.1p priority and DSCP value can be remarked simultaneously, but the DSCP value and IP cannot be remarked simultaneously

To remark egress traffic on an interface:

Procedure

Step 1

Click Quality of Service > General > Remark Interface Settings.

Step 2

Select an interface type (Port or LAG), and click Go.

Step 3

Select a Port/LAG, and click Edit.

Step 4

Enter the parameters.

  • Interface—Select the port or LAG to be defined.

  • Remark CoS—Check Enable to remark the CoS/802.1p priority for egress traffic on this port or LAG.

  • Remark IP Precedence—Check Enable to remark the IP precedence for egress traffic on this port or LAG.

  • Remark DSCP—Check Enable to remark the DSCP value for egress traffic on this port or LAG.

Step 5

Click Apply. The Running Configuration is updated