LLDP Port Status

The LLDP Port Status page contains the LLDP global information for every port.

Procedure

Step 1

To view the LLDP port status, click Administration > Discovery LLDP > LLDP Port Status.

Information for all ports is displayed.

Step 2

Select a specific port and click LLDP Local Information Detail to see the details of the LLDP and LLDP-MED TLVs sent out to the port.

Step 3

Select a specific port and click LLDP Neighbor Information Detail to see the details of the LLDP and LLDP-MED TLVs received from the port.

LLDP Port Status Global Information

  • Chassis ID Subtype—Type of chassis ID (for example, MAC address).

  • Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC address, the MAC address of the device appears.

  • System Name—Name of device.

  • System Description—Description of the device (in alpha-numeric format).

  • Supported System Capabilities—Primary functions of the device, such as Bridge, WLAN AP, or Router.

  • Enabled System Capabilities—Primary enabled function(s) of the device.

  • Port ID Subtype—Type of the port identifier that is shown.

LLDP Port Status Table

  • Interface—Port identifier.

  • LLDP Status—LLDP publishing option.

  • LLDP MED Status—Enabled or disabled.

  • Local PoE ((Power Type, Power Source, Power Priority, Power Value)—Local PoE information advertised.

  • Remote PoE (Power Type, Power Source, Power Priority, Power Value)—PoE information advertised by the neighbor.

  • # of neighbors—Number of neighbors discovered.

  • Neighbor capability of 1st device—Displays the primary functions of the neighbor; for example: Bridge or Router.