Use the Binding Database page to query and view information about inactive addresses recorded in the IP Source Guard database. To query the IP Source Guard database and/or define an IP source binding rule:
Procedure
| Step 1 | Click Security > IP Source Guard > Binding Database. |
| Step 2 | Define the preferred filter for searching the IP Source Guard database:
-
VLAN ID—Queries the database by VLAN ID.
-
MAC Address—Queries the database by MAC address.
-
IP Address—Queries the database by IP address.
-
Interface—Queries the database by Interface name.
|
| Step 3 | Click Go. These appear in the Binding Database table:
-
VLAN ID—VLAN with which the IP address is associated.
-
MAC Address—MAC address of the interface.
-
IP Address—IP address of the interface.
-
Interface—Interface name.
-
Type—Type of the IP address. The possible values are:
-
Lease Time—The amount of time that the IP address is active. IP addresses whose lease times are expired are deleted from the database.
|
| Step 4 | Click Add to add an IP source binding rule. |
| Step 5 | Enter the following information:
-
Interface—Select an interface.
-
VLAN ID—Select a VLAN with which the address is associated.
-
MAC Address—Enter the MAC address of the source traffic.
-
IP Address—Enter the IP address of the source traffic.
|
| Step 6 | Click Apply. The IP source binding rule is defined, and the Running Configuration is updated. |