Filter Settings

To assign a Multicast filter profile to an interface to deny or permit the Multicast group when the join group matches the filter profile:

Procedure

Step 1

Click Multicast > Multicast Filtering > Filter Settings.

Step 2

Select the Interface Type equals to— To view either ports or LAGs.

Step 3

Select an interface and click Edit.

Step 4

Enter the following information:

  • Interface—Select the port or LAG to be defined.

  • Filter—Enable or disable filtering Multicast traffic on this interface.

  • Filter Profile Index—If enabled, select the Multicast filter profile to be applied. The Multicast filter settings defined in the profile are applied to the interface.

Step 5

Click Apply. The Running Configuration file is updated.