Maximum Multicast Groups

Use the Maximum Multicast Groups page to configure the maximum number of Multicast groups that are allowed on each interface and specify the action when the limit reaches.

To define the maximum number of IGMP and MLD groups on an interface:

Procedure

Step 1

Click Multicast > Maximum Multicast Groups.

Step 2

Select the interface type (Port and LAG), and click Go.

Step 3

Select an interface and click Edit:

Step 4

Enter the following information:

  • Interface—Select the port or LAG to be defined.

  • IGMP Maximum Multicast Group—Enter the maximum number of IGMP groups that are allowed on the interface.

  • IGMP Exceed Action—Denies or replaces the existing group with the new group for which the IGMP report was received when the limit is reached.

  • MLD Maximum Multicast Group—Enter the maximum number of MLD groups that are allowed on the interface.

  • MLD Exceed Action—Denies or replaces the existing group with the new group for which the MLD report was received when the limit is reached.

Step 5

Click Apply. The Running Configuration is updated.