Cisco CallManager Features and Services Guide, Release 3.3(4)
Preface

Table Of Contents

Preface

Purpose

Audience

Organization

Related Documentation

Conventions

Obtaining Documentation

Cisco.com

Ordering Documentation

Documentation Feedback

Obtaining Technical Assistance

Cisco Technical Support Website

Opening a TAC Case

TAC Case Priority Definitions

Obtaining Additional Publications and Information


Preface


This preface describes the purpose, audience, organization, and conventions of this guide and provides information on how to obtain related documentation.

The preface covers these topics:

Purpose

Audience

Organization

Related Documentation

Conventions

Obtaining Documentation

Documentation Feedback

Obtaining Technical Assistance

Obtaining Additional Publications and Information

Purpose

The Cisco CallManager Features and Services Guide provides the information that you need to understand, install, configure, manage, use, and troubleshoot Cisco CallManager features.

Audience

The Cisco CallManager Features and Services Guide provides information for network administrators who are responsible for managing the Cisco CallManager system. This guide requires knowledge of telephony and IP networking technology.

Organization

The following table provides an overview of the organization of this guide.

Chapter
Description

Cisco CallManager Extension Mobility

Provides a description and configuration procedures for Cisco CallManager Extension Mobility for Cisco CallManager 3.3.

Cisco IP Manager Assistant

Provides a description and configuration procedures for Cisco IP Manager Assistant for Cisco CallManager.

Cisco Call Back

Provides a description and configuration procedures for Cisco Call Back for Cisco CallManager.

Client Matter Codes and Forced Authorization Codes

Provides a description and configuration procedures for Client Matter Codes (CMC) and Forced Authorization Codes (FAC).

Custom Phone Rings

Provides a description and configuration procedures for custom phone rings.

Music On Hold

Provides a description and configuration procedures for Cisco Music On Hold.

Cisco CallManager AutoAttendant

Provides a description and configuration procedures for Cisco CallManager AutoAttendant.

Troubleshooting Features and Services

Contains error and recovery procedures for Cisco CallManager Extension Mobility, Cisco IPMA, and Cisco AutoAttendant.

Cisco WebDialer

Provides a description and installation and configuration procedures for Cisco WebDialer.


Related Documentation

Refer to the following documents for further information about related Cisco IP telephony applications and products:

Installing Cisco CallManager Release 3.3

Upgrading Cisco CallManager Release 3.3

Cisco CallManager Release Backup and Restore

Release Notes for Cisco CallManager Release 3.3

Cisco CallManager System Guide

Cisco CallManager Administration Guide

Cisco CallManager Serviceability System Guide

Cisco CallManager Serviceability Administration Guide

Troubleshooting Guide for Cisco CallManager

Cisco IP Phone Administration Guide for Cisco CallManager

Bulk Administration Tool Guide for Cisco CallManager

Cisco Security Agent documentation that is compatible with the version of Cisco CallManager 3.3 that is installed in the cluster

Conventions

This document uses the following conventions:

Convention
Description

boldface font

Commands and keywords are in boldface.

italic font

Arguments for which you supply values are in italics.

[   ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

screen font

Terminal sessions and information the system displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

 

This pointer highlights an important line of text in an example.

^

The symbol ^ represents the key labeled Control—for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.

<   >

Nonprinting characters, such as passwords, are in angle brackets.

Action > Reports

Command paths in a graphical user interface (GUI).


Notes use the following convention:


Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.


Timesavers use the following conventions:


Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.


Tips use the following conventions:


Tip Means the information contains useful tips.


Cautions use the following convention:


Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Warnings use the following conventions:


Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and familiar with standard practices for preventing accidents.


Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:

http://www.cisco.com/en/US/partner/ordering/index.shtml

Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).

Documentation Feedback

You can submit e-mail comments about technical documentation to bug-doc@cisco.com.

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, the Cisco Technical Assistance Center (TAC) provides 24-hour-a-day, award-winning technical support services, online and over the phone. Cisco.com features the Cisco Technical Support Website as an online starting point for technical assistance. If you do not hold a valid Cisco service contract, please contact your reseller.

Cisco Technical Support Website

The Cisco Technical Support Website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco Technical Support Website is available 24 hours a day, 365 days a year. The Cisco Technical Support Website is located at this URL:

http://www.cisco.com/tac

Accessing all the tools on the Cisco Technical Support Website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL:

http://tools.cisco.com/RPF/register/register.do

Opening a TAC Case

Using the online TAC Case Open Tool is the fastest way to open P3 and P4 cases. (P3 and P4 cases are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using the recommended resources, your case will be assigned to a Cisco TAC engineer. The online TAC Case Open Tool is located at this URL:

http://www.cisco.com/tac/caseopen

For P1 or P2 cases (P1 and P2 cases are those in which your production network is down or severely degraded) or if you do not have Internet access, contact Cisco TAC by telephone. Cisco TAC engineers are assigned immediately to P1 and P2 cases to help keep your business operations running smoothly.

To open a case by telephone, use one of the following numbers:

Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447

For a complete listing of Cisco TAC contacts, go to this URL:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

TAC Case Priority Definitions

To ensure that all cases are reported in a standard format, Cisco has established case priority definitions.

Priority 1 (P1)—Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Priority 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Go to this URL to visit the company store:

http://www.cisco.com/go/marketplace/

The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:

http://cisco.com/univercd/cc/td/doc/pcat/

Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press online at this URL:

http://www.ciscopress.com

Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/packet

iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/ipj

Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL:

http://www.cisco.com/en/US/learning/index.html