Safety Labels
This section explains the significance of the safety labels attached to some cards. The faceplates of the cards are clearly labeled with warnings about the laser radiation levels. You must understand all warning labels before working on these cards.
Class 1 Laser Product Cards
The TNC, TNCE, TSC, TSCE, TNCS, OSCM, OSC-CSM, 4MD-xx.x, MXP_2.5G_10G, MXP_2.5G_10E, MXP_2.5G_10E_C, MXP_2.5G_10E_L, ADM-10G, GE_XP, 10GE_XP, GE_XPE, 10GE_XPE, and OTU2_XP cards are Class 1 laser products.
Note |
Due to memory limitations, TCC2/TCC2P cards are not supported from Release 10.5.2 onwards. As a result, in a multishelf configuration, the TCC2/TCC2P card cannot be a node controller or a shelf controller. Upgrade the TCC2/TCC2P card to a TCC3 card. |
The labels that appear on these cards are described in the following sections.
Class 1 Laser Product Label
The Class 1 Laser Product label is shown in the following figure.
Hazard Level 1 Label
The Hazard Level 1 label is shown in the following figure. This label is displayed on the faceplate of the cards.
Laser Source Connector Label
The Laser Source Connector label is shown in the following figure.
This label indicates that a laser source is present at the optical connector where the label has been placed.
FDA Statement Labels
The FDA Statement labels are shown in the following figures. These labels show compliance to FDA standards and that the hazard level classification is in accordance with IEC60825-1 Am.2 or Ed.1.2.
Shock Hazard Label
The Shock Hazard label is shown in the following figure.
This label alerts personnel to electrical hazard within the card. The potential of shock hazard exists when removing adjacent cards during maintenance, and touching exposed electrical circuitry on the card itself.
Class 1M Laser Product Cards
The OPT-PRE, OPT-BST, OPT-BST-E, OPT-AMP-17-C, OPT-AMP-C, OPT-RAMP-C, OPT-RAMP-CE, OPT-EDFA-17, OPT-EDFA-24, RAMAN-CTP, RAMAN-COP, EDRA-1-26, EDRA-1-35, EDRA-2-26, EDRA-2-35, TDC-CC, TDC-FC, PSM, 32WSS32DMX, 40-DMX-C, 40-DMX-CE, 40-MUX-C, 40-WSS-C, 40-WSS-CE, 40-WXC-C, 80-WXC-C, 16-WXC-FS, 40-SMR1-C, 40-SMR2-C, 17 SMR9 FS, 24 SMR9 FS, 34 SMR9 FS, SMR20 FS, TXP_MR_10G, TXP_MR_10E, TXP_MR_10E_C, TXP_MR_10E_L, TXP_MR_2.5G, TXPP_MR_2.5G, MXP_MR_2.5G, MXPP_MR_2.5G, MXP_MR_10DME_C, MXP_MR_10DME_L, 40E-TXP-C, 40ME-TXP-C, 40G-TXP-C, 40G-MXP-C, 40E-MXP-C, 40ME-MXP-C, AR_MXP, AR_XP, AR_XPE, 100G-LC-C, 10x10G-LC, CFP-LC, 100G-CK-C, 100ME-CKC, 100GS-CK-LC, 100GS-CK-C, 200G-CK-LC, 400G-XP-LC, 17 SMR9 FS, 24 SMR9 FS, 34 SMR9 FS, SMR20 FS, SMR20 FS CV, 12-AD-FS, 16-AD-FS, and MR-MXP cards are Class 1M laser products.
The labels that appear on these cards are described in the following subsections.
Class 1M Laser Product Statement
The Class 1M Laser Product statement is shown in the following figure.
Hazard Level 1M Label
The Hazard Level 1M label is shown in the following figure. This label is displayed on the faceplate of the cards.
Laser Source Connector Label
The Laser Source Connector label is shown in the following figure.
FDA Statement Labels
The FDA Statement labels are shown in the following figures. These labels show compliance to FDA standards and that the hazard level classification is in accordance with IEC60825-1 Am.2 or Ed.1.2.
Shock Hazard Label
The Shock Hazard label is shown in the following figure.
Burn Hazard Label
The burn hazard label is shown in the following figure.