幻影 — 熱待命配置失敗
適用性
Splunk SOAR調查
如何識別：1.使用下一個命令：
phenv python2.7 /<phantom_home>/bin/setup_warm_standby.pyc --standby-mode --configure --primary-ip 10.10.10.10. --standby-ip 20.20.20.20.
2.出現下一個錯誤：
========= Processed Params ========= Validating config Done Configuring OVA as Standby Stopping all running daemons Exception: Command '/opt/phantom/bin/phsvc start postgresql-9.4' returned non-zero exit status 1 Message: An old version of the database format was found. You need to upgrade the data format before using PostgreSQL. See (Your System's documentation directory)/postgresql-9.4.15/README.rpm-dist for more information. Exception: Command '/opt/phantom/bin/phsvc start postgresql-9.4' returned non-zero exit status 1 Message: Script execution ========= Script Failed =========
3.主配置正確：
phenv python2.7 /<phantom_home>/bin/setup_warm_standby.pyc --primary-mode --configure --primary-ip 10.10.10.10 --standby-ip 20.20.20.20
4.這是全新且完整的系統配置，兩者版本相同，這是資料跨同步所必需的。
5.在warm_standby.log中未發現剩餘空間錯誤：
[Errno 28] No space left on device: '/opt/phantom/tmp/db/base/16387/16440'"), ('/opt/phantom/data/db/base/1687/1543313', '/opt/phantom/tmp/db/base/16387/1543313',
"[Errno 28] No space left on device: '/opt/phantom/tmp/db/base/16387/1543313'"), ('/opt/phantom/data/db/base/1687/2489196', '/opt/phantom/tmp/db/base/16387/2489196',
"[Errno 28] No space left on device: '/opt/phantom/tmp/db/base/16387/2489196'"), ('/opt/phantom/data/db/base/1687/1357532.2', '/opt/phantom/tmp /db/base/16387/1357532.2',
"[Errno 28] No space left on device: '/opt/phantom/tmp/db/base/16387/1357532.2'"), ('/opt/phantom/data/db/base/1687/17634', '/opt/phantom/tmp/db/base/16387/17634',
"[Errno 28] No space left on device: '/opt/phantom/tmp/db/base/16387/17634'"), ('/opt/phantom/data/db/base/16387/1627', '/opt/phantom/tmp/db/base/16387/16427',
"[Errno 28] No space left on device: '/opt/phantom/tmp/db/base/16387/16427'"), ('/opt/phantom/data/db/base/16387/154081', '/opt/phantom/
解析
如何識別：使用乾淨( /<phantom_home>/data)資料庫目錄嘗試使用空的psql，以便能夠再次運行備用指令碼（分割槽已滿並正在中斷psql，因為其中仍有來自克隆的舊資料庫）
之後，您應該能夠看到指令碼成功運行：
=========指令碼完=========
修訂記錄
| 修訂 | 發佈日期 | 意見 |
|---|---|---|
1.0 |
28-Sep-2026
|
初始版本 |
意見