Cisco has translated this document using a combination of machine and human technologies to offer our users around the world Support content in their own language.Please note that even the best machine translation will not be as accurate as that provided by a professional translator.Cisco Systems, Inc. assumes no liability for the accuracy of these translations and recommends that the original English document (link provided) is always consulted.
[ req ]
default_bits = 2048
distinguished_name = req_distinguished_name
req_extensions = req_ext
[ req_distinguished_name ]
countryName = Country Name (2 letter code)
stateOrProvinceName = State or Province Name (full name)
localityName = Locality Name (eg, city)
organizationName = Organization Name (eg, company)
commonName = Common Name (e.g. server FQDN or YOUR name)
[ req_ext ]
subjectAltName = @alt_names
DNS.1 = pcptest23.cisco.ab.edu
DNS.2 = pcptest.gov.cisco.ca
[root@ryPCP11-5 httpd]# openssl req -out PCPSAN.csr -newkey rsa:2048 -nodes -keyout private.key -config san.cnf
Generating a 2048 bit RSA private key
writing new private key to 'private.key'
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
Country Name (2 letter code) :US
State or Province Name (full name) :TX
Locality Name (eg, city) :RCDN
Organization Name (eg, company) :CISCO
Common Name (e.g. server FQDN or YOUR name) :doctest.cisco.com