Inleiding
Dit document beschrijft de procedure om het shell-wachtwoord van de EPNM-server bij te werken.
Voorwaarden
Vereisten
Cisco raadt u aan deze onderwerpen te kennen:
- Evolved Programmable Network Manager (EPNM)
- Huidig shell-wachtwoord
Gebruikte componenten
De informatie in dit document is gebaseerd op de volgende software- en hardware-versies:
De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u zorgen dat u de potentiële impact van elke opdracht begrijpt.
Configureren
Opmerking: Dit proces vereist dat u het huidige shell-wachtwoord kent
Configuraties
Stap 1. Meld u aan bij de EPNM CLI als beheerder:
Stap 2. Voer de opdracht "shell disable" uit en voer het huidige shell-wachtwoord in wanneer daarom wordt gevraagd:
epnm/admin# shell disable
Enter shell access password :
shell access is disabled
epnm/admin#
Stap 3. Voer de opdracht "shell" uit en voer het nieuwe shell-wachtwoord in wanneer daarom wordt gevraagd:
epnm/admin# shell
Shell access password is not set
Configure password for shell access
Password :
Password Again :
Shell access password is set
Run the command again to enter shell
epnm/admin#
Verifiëren
Voer de "shell" -opdracht uit met het bijgewerkte wachtwoord om te controleren of u naar de Linux-shell gaat:
epnm/admin#
epnm/admin# shell
Enter shell access password :
Starting bash shell ...
ade #
ade #