この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
この章では、ユーザ、グループ、およびホット アクセスを設定する方法について説明します。
• 「ユーザの管理」
この項では、ユーザ グループを追加、削除、および編集する方法について説明します。
ユーザ グループをロケーション グループに追加する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 編集するロケーション サーバの名前をクリックします。
ステップ 5 ドロップダウン メニュー(右側)から、 Add Group を選択し、 GO をクリックします。
ステップ 6 Group Name フィールドにグループの名前を入力します。
ステップ 7 Permission ドロップダウン メニューからアクセス権レベルを選択します。
• Full Access(Cisco WCS がロケーション サーバにアクセスするために必要)
ステップ 8 Save をクリックして、新しいグループをロケーション サーバに追加します。
ユーザ グループをロケーション グループから削除する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 編集するロケーション サーバの名前をクリックします。
ステップ 5 削除するグループのチェックボックスをオンにします。
ステップ 6 ドロップダウン メニュー(右側)から、 Delete Group を選択し、 GO をクリックします。
ステップ 7 OK をクリックし、選択したグループを削除することを確認します。
ユーザ グループのアクセス権を変更する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 編集するロケーション サーバの名前をクリックします。
ステップ 6 Permission ドロップダウン メニューからアクセス権レベルを選択します。
ステップ 7 変更を適用するには、 Save をクリックします。
この項では、ユーザを追加、削除、および編集する方法について説明します。アクティブなユーザ セッションを表示する方法についても説明します。
ユーザをロケーション サーバに追加する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 編集するロケーション サーバの名前をクリックします。
ステップ 5 ドロップダウン メニュー(右側)から、 Add User を選択し、 GO をクリックします。
ステップ 6 Username フィールドにユーザ名を入力します。
ステップ 7 Password フィールドにパスワードを入力します。
ステップ 8 Group Name フィールドにユーザが属しているグループの名前を入力します。
ステップ 9 Permission ドロップダウン メニューからアクセス権レベルを選択します。
選択できるアクセス権レベルは、Read Access、Write Access、および Full Access の 3 つです。
ステップ 10 Save をクリックして、新しいユーザをロケーション サーバに追加します。
ロケーション サーバからユーザを削除する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 編集するロケーション サーバの名前をクリックします。
ステップ 5 削除するユーザのチェックボックスをオンにします。
ステップ 6 ドロップダウン メニュー(右側)から、 Delete User を選択し、 GO をクリックします。
ステップ 7 OK をクリックし、選択したユーザを削除することを確認します。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 編集するロケーション サーバの名前をクリックします。
ステップ 6 Password、Group Name、および Permission フィールドに必要な変更を行います。
ステップ 7 変更を適用するには、 Save をクリックします。
アクティブ ユーザ セッションを表示する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 3 Administration (左側)をクリックし、管理設定オプションを表示します。
ステップ 4 Active Sessions をクリックします。
Cisco WCS に、アクティブ ロケーション サーバ セッションのリストが表示されます。セッションごとに、次の情報が表示されます。
この項では、ホスト アクセス レコードを追加、削除、および編集する方法について説明します。
Cisco WCS を使用して、ロケーション サーバ データベースにホスト アクセス レコードを追加できます。ホスト アクセス レコードを使用して、ロケーション サーバにどのホストがいつアクセスするのかを制御できます。ホスト アクセスに優先順位を割り当てることによって、アクセス プリファレンスを制御することもできます。
新しいホスト アクセス レコードを追加する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 設定するロケーション サーバの名前をクリックします。
ステップ 5 ドロップダウン メニュー(右側)から、 Add Host Access を選択し、 GO をクリックします。
ステップ 6 ddd . ddd . ddd . ddd ./ dd 形式でホストの IP アドレスとネットマスクを入力します。
次に、IP アドレスとネットマスク エントリの例を示します。
|
|
---|---|
ステップ 7 ホスト アクセスを許可するには、Permit フィールドの Enable チェックボックスをオンにします。
ホスト アクセスを拒否するには、 Enable チェックボックスをオフにします。
ステップ 8 Priority フィールドに 0 ~ 99999 の優先順位番号を入力します。
優先順位が高いホストは、優先順位が低いホストよりもアクセスが優先されます。
ステップ 9 Start Access フィールドに、ロケーション サーバにアクセスできる時刻を入力します。
Hrs. フィールドに、0 ~ 23 の値を入力します。Mins フィールドに、0 ~ 59 の値を入力します。
ステップ 10 ホスト アクセスを終了する時刻を入力します。
Hrs. フィールドに、0 ~ 23 の値を入力します。Mins フィールドに、0 ~ 59 の値を入力します。
ステップ 11 Save をクリックして、新しいホスト アクセスをロケーション サーバに追加します。
ホスト アクセス レコードを削除する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 設定するロケーション サーバの名前をクリックします。
ステップ 5 削除するホスト アクセス レコードのチェックボックスをオンにします。
ステップ 6 ドロップダウン メニュー(右側)から、 Delete Host Access を選択し、 GO をクリックします。
ステップ 7 OK をクリックし、選択したホスト アクセス レコードを削除することを確認します。
ホスト アクセス レコードを編集する手順は、次のとおりです。
ステップ 1 Cisco WCS で、 Location > Location Servers を選択します。
ステップ 2 設定するロケーション サーバの名前をクリックします。
ステップ 5 設定するホスト アクセスの名前をクリックします。
ステップ 6 Permit、Priority、Start Access、および End Access フィールドに必要な変更を行います。
ステップ 7 変更を適用するには、 Save をクリックします。