サーバーのブート順の設定
(注) |
ホストが BIOS 電源投入時自己診断テスト(POST)を実行している間は、ブート順を変更しないでください。 |
始める前に
このタスクを実行するには、user または admin 権限を持つユーザとしてログインする必要があります。
手順
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 |
Server# scope bios |
BIOS コマンド モードを開始します。 |
||
ステップ 2 |
Server /bios # set boot-order device1, device2, device3.... |
ブート デバイス オプションと順序を指定します。
次の 1 つ以上を選択できます。
|
||
ステップ 3 |
Server /bios # commit |
トランザクションをシステムの設定にコミットします。 |
||
ステップ 4 |
(任意)Server /bios # show detail |
サーバーのブート順を表示します。 |
次回の BIOS ブートでは、新しいブート順が使用されます。
例
次に、ブート順を設定し、トランザクションをコミットする例を示します。
server /bios # set boot-order uefimap,uefios
To manage boot-order:
- Reboot server to have your boot-order settings take place
- Do not disable boot options via BIOS screens
- If a specified device type is not seen by the BIOS, it will be removed
from the boot order configured on the BMC
- Your boot order sequence will be applied subject to the previous rule.
The configured list will be appended by the additional device types
seen by the BIOS
- Legacy Boot Order configuration will disable all the active Boot Devices which will
hide them from BIOS
server /bios *# commit
Changes to BIOS set-up parameters will require a reboot.
Do you want to reboot the system?[y|N]y
A system reboot has been initiated.
server /bios # show detail
BIOS:
BIOS Version: UCSEDM6_1.08
BIOS Flash: 1
Backup BIOS Version: UCSEDM6_1.08
Backup BIOS Flash: 0
BIOS Post Complete: 0
Boot Order: UEFIMAP,UEFIOS
FW Update Status: Done, OK
Password: ******
server /bios #