単一サーバのデュアル接続
-
サーバ ボードと SIOC カード間の PCIe は、BIOS を使用して接続されます。
-
CMC は、サーバ ID とそれを作成した仮想ネットワーク インターフェイスとの正しいアソシエーションを制御します。
この機能を使用すると、Web UI またはコマンドライン インターフェイスを使用して有効または無効にすることで、新しい単一サーバのデュアル VIC シャーシ プロパティを Cisco IMC で設定できます。
Cisco IMC のハードウェア設定に基づいて、特定の PCI 接続が VIC で有効になります。CMC は現在のシャーシ ハードウェア構成とともにシンガー サーバ デュアル VIC プロパティを使用して、デュアル SIOC VIC のいずれかに仮想ネットワーク インターフェイスを作成するときに指定するサーバ ID プロパティを識別します。Web UI 上の VIC 設定ページには、VIC が PCIe にリンクされているサーバ ID の読み取り専用属性が表示されます。これはホスト サーバによって、仮想ネットワーク インターフェイス トラフィック用に使用されます。
単一サーバのデュアル SIOC 接続の設定
始める前に
-
このタスクを実行するには、admin 権限を持つユーザとしてログインする必要があります。
-
シャーシには、単一のサーバと 2 つの VIC アダプタ(SIOC)が必要です。
手順
ステップ 1 |
[Navigation] ペインの [Chassis] メニューをクリックします。 |
ステップ 2 |
[Chassis] メニューの [Summary] をクリックします。 |
ステップ 3 |
[Chassis Summary] ペインの [Chassis Properties] 領域で、[Server SIOC Connectivity] フィールドから、[Single Server Single SIOC] または [Single Server Dual SIOC] を選択します。 単一のサーバと 2 つの SIOC が搭載されたシャーシがある場合、[Server SIOC Connectivity] フィールドに [Single Server Dual SIOC] と表示されます。 |
ステップ 4 |
[Save Changes] をクリックします。 これにより、デュアル接続またはシングル接続用にサーバが設定されます。 |