この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
This chapter includes the following sections:
Cisco UCS B シリーズ サーバにオペレーティング システム(OS)をインストールするには、次のタスクを実行します。
完了 | 作業 | その他の情報 |
---|---|---|
Installation Prerequisites Checklist で説明されている前提条件を満たします。 |
インストールやライセンスの要件の詳細については、インストールするオペレーティング システムのドキュメントを参照してください。 |
|
Service Profile Configuration Prerequisites で説明されているサービス プロファイル設定の前提条件を満たします。 |
サービス プロファイルの詳細については、使用している Cisco UCS Manager のバージョンに関する GUI または CLI のコンフィギュレーション ガイドを参照してください。 |
|
KVM Consoleを起動し、インストール メディアをマウントします。 |
詳細については、次の項を参照してください。Mounting the Installation ISO Image |
|
OS の手順の説明に従って、インストールを完了します。 |
詳細については、次のいずれかを参照してください。 |
Before you begin installing the operating system (OS), make sure that you have the following items or have completed the following tasks:
Completed? | Prerequisite | ||
---|---|---|---|
Make sure the installation-target server supports the version of the operating system (OS) you plan to install. For the supported versions, see the appropriate PDF or use the interactive UCS Hardware and Software Interoperability Utility. Both are available at the following URL: http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html.
|
|||
Make sure you have a configured IP address for Cisco UCS Manager GUI, as well as a login account with administration privileges. |
|||
Make sure you have the installation media for the OS, either on a DVD or as an ISO image. If the software requires an activation key, make sure you have that information as well.
|
|||
If your server has an LSI MegaRAID controller, configure RAID settings for the drives in your server. If you do not configure your LSI MegaRAID LUNs before installing the OS, disk discovery failures might occur during the installation and you may see error messages such as “No Device Found.” |
After you complete these prerequisites, make sure you have a properly-configured service profile available to associate with the server. For details, see Service Profile Configuration Prerequisites.
Regardless of which version of the OS you install, the installation-target server must be associated with a properly configured service profile. The service profile contains all of the information and settings that are applied to the server.
The following checklist provides the minimum configuration settings required in the service profile. For detailed instructions about configuring these settings, see the Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL: http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
Completed? | Configuration Task | Additional Information |
---|---|---|
Use Cisco UCS Manager to configure pools that identify the physical and logical resources on your network. You select from these pools as you build the service profile for the server. |
Cisco UCS allows you to define pools for servers, MAC addresses, WWN addresses, UUID suffixes, and management IP addresses. |
|
Configure one named VSAN for each uplink fabric to which the target server is networked. |
A named VSAN creates a connection to a specific external SAN fabric. |
|
Associate each VSAN with a physical uplink port on its corresponding fabric interconnect. |
For example, associate the VSAN that you created for Fabric A with an available physical port on Fabric Interconnect A. |
|
Create one vHBA policy for each uplink fabric to which the target server is networked. |
This vHBA policy defines how the vHBA connects to the SAN. |
|
If your server has an LSI MegaRAID controller, configure RAID settings for the drives in your system by creating a Local Disk Configuration policy. |
If you do not configure your LSI MegaRAID LUNs before installing the OS, disk discovery failures might occur during the installation and you may see error messages such as “No Device Found.” |
|
Create a boot policy for the type of installation you are preforming. |
If you are installing the OS on an internal drive, define the following Boot Order: If you are installing the OS in a bootable SAN LUN, define the following Boot Order: |
|
Configure any other policies that you require to manage the server. |
A complete list of the available policies is included in the Cisco UCS Manager Configuration Guides. |
|
Create a new service profile or modify an existing service profile for the target blade server. Make sure this service profile is associated the network settings and policies that you created for the target server. |
If you plan to install the same OS on multiple servers, you can also create a service profile template and associate that template with the configuration settings you created. You can then use that template to create a unique service profile for each target server. |
|
Associate the service profile with the target server and reboot the server. |
When the target server is rebooted, the settings in the service profile are assigned to it. You cannot mount an ISO installation or driver image until after the server has finished rebooting and Cisco UCS Manager has successfully associated the service profile with the server. |
次の例は、SAN のブート機能を使用する Cisco UCS domainのトポロジを示しています。
Install the OS as described in the installation procedure that matches the OS you are installing.