Cisco UCS B シリーズ ブレード サーバ Linux インストレーション ガイド

偏向のない言語

この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。

翻訳について

このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。

マニュアルのコンテンツ
このマニュアル内で検索
ご利用いただける言語
Download Options

Book Title

Cisco UCS B シリーズ ブレード サーバ Linux インストレーション ガイド

Chapter Title

Installation Driver Information

検索結果

Updated:
2013年1月6日

章のタイトル： Installation Driver Information

目次

This appendix includes the following sections:

Linux Installation Drivers

The required installation drivers and detailed driver information is available on the Cisco UCS B-Series Drivers DVD.


（注）  

The Cisco UCS B-Series Drivers DVD ISO image is available from the Cisco.com support site under Unified Computing and Servers > Cisco UCS B-Series Blade Server Software > Unified Computing System (UCS) Drivers . The direct URL is: http:/​/​www.cisco.com/​cisco/​software/​type.html?mdfid=283853163&flowid=25821.

The drivers are organized into top-level folders by operating system, and each operating system folder has a hierarchically structured series of subfolders that become increasing specific so that you can find the exact drivers you need. When you navigate to a folder that contains drivers, it will also contain one or more README files that describes what those particular drivers are used for.

An example of the folder structure for Linux follows:

Linux
   ChipSet
      Intel
         RHEL
            OS-version-number
         SLES
            OS-version-number
   Network
      vendor
         model-number
            RHEL
               OS-version-number
            SLES
               OS-version-number
   Security
      TPM
         RHEL
            OS-version-number
         SLES
            OS-version-number
   Storage
      vendor
         model-number
            RHEL
               OS-version-number
            SLES
               OS-version-number
   Video
      vendor
         model-number
            RHEL
               OS-version-number
            SLES
               OS-version-number

For example, the RHEL6.2 drivers for the Cisco UCS M81KR Virtual Interface Card can be found in the folder Linux/Network/Cisco/M81KR/RHEL/RHEL6.2.

Viewing Installed Devices Using the UCS Manager GUI

手順
    ステップ 1   In the Navigation pane, click the Equipment tab.
    ステップ 2   On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers > Server Number > Adapter.
    ステップ 3   Look at the Adapters tab in the Work pane.

    All adapters installed in the selected server are displayed in the table.

    Viewing Installed Interface Cards Using the UCS Manager CLI

    手順
      ステップ 1   Use Telnet or SSH to connect to the UCS system.
      ステップ 2   UCS-A# scope server chassis-id / server-id

      Enters chassis server mode for the specified server in the specified chassis.
      ステップ 3   UCS-A /chassis/server # show adapter

      Displays the list of interface cards installed in the server by their PID number. 

      switch-A # scope chassis-2 server10
switch-A /chassis-2 # show adapter

Server 1/1:
Adapter PID Vendor Serial Operational State
------- ---------- ----------------- ------------ -----------------
1 N20-AE0002 Cisco Systems Inc EXM12510017 Operable
2 N20-AE0003 Cisco Systems Inc EXM12510018 Operable

switch-A /server-qual #

      Viewing Installed Devices Using the KVM Console

      手順
        ステップ 1   In your web browser, type or select the web link for Cisco UCS Manager GUI.

        例:

        The default web link is http://UCSManager_IP or https://UCSManager_IP . In a standalone configuration, UCSManager_IP is the IP address for the management port on the fabric interconnect. In a cluster configuration, UCSManager_IP is the IP address assigned to Cisco UCS Manager.

        ステップ 2   On the Cisco UCS Manager launch page, click Launch KVM Manager.
        ステップ 3   If a Security Alert dialog box appears, click Yes to accept the security certificate and continue.
        ステップ 4   On the UCS - KVM Launch Manager Login page, do the following:
        1. Enter your Cisco UCS username and password.
        2. 任意: If your Cisco UCS implementation includes multiple domains, select the appropriate domain from the Domain drop-down list.
        3. Click OK.
        ステップ 5   In the Service Profiles table of the KVM Launch Manager, do the following:
        1. Locate the row containing the service profile and associated server on which you want to view the installed devices.
        2. In the Launch KVM column for that server, click Launch.

          The KVM console opens in a separate window.

          ヒント   

          If the Caps Lock key on your keyboard is on when you open a KVM session, and you subsequently turn off your Caps Lock key, the KVM console may continue to act as if Caps Lock is turned on. To synchronize the KVM console and your keyboard, press Caps Lock once without the KVM console in focus and then press Caps Lock again with the KVM console in focus.

        ステップ 6   Reboot the server and observe the information about the installed devices on the console screen during bootup.

        This appendix includes the following sections:

        Linux Installation Drivers

        The required installation drivers and detailed driver information is available on the Cisco UCS B-Series Drivers DVD.


        （注）  

        The Cisco UCS B-Series Drivers DVD ISO image is available from the Cisco.com support site under Unified Computing and Servers > Cisco UCS B-Series Blade Server Software > Unified Computing System (UCS) Drivers . The direct URL is: http:/​/​www.cisco.com/​cisco/​software/​type.html?mdfid=283853163&flowid=25821.

        The drivers are organized into top-level folders by operating system, and each operating system folder has a hierarchically structured series of subfolders that become increasing specific so that you can find the exact drivers you need. When you navigate to a folder that contains drivers, it will also contain one or more README files that describes what those particular drivers are used for.

        An example of the folder structure for Linux follows:

        Linux
   ChipSet
      Intel
         RHEL
            OS-version-number
         SLES
            OS-version-number
   Network
      vendor
         model-number
            RHEL
               OS-version-number
            SLES
               OS-version-number
   Security
      TPM
         RHEL
            OS-version-number
         SLES
            OS-version-number
   Storage
      vendor
         model-number
            RHEL
               OS-version-number
            SLES
               OS-version-number
   Video
      vendor
         model-number
            RHEL
               OS-version-number
            SLES
               OS-version-number

        For example, the RHEL6.2 drivers for the Cisco UCS M81KR Virtual Interface Card can be found in the folder Linux/Network/Cisco/M81KR/RHEL/RHEL6.2.

        Viewing Installed Devices Using the UCS Manager GUI

        手順
          ステップ 1   In the Navigation pane, click the Equipment tab.
          ステップ 2   On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers > Server Number > Adapter.
          ステップ 3   Look at the Adapters tab in the Work pane.

          All adapters installed in the selected server are displayed in the table.

          Viewing Installed Interface Cards Using the UCS Manager CLI

          手順
            ステップ 1   Use Telnet or SSH to connect to the UCS system.
            ステップ 2   UCS-A# scope server chassis-id / server-id

            Enters chassis server mode for the specified server in the specified chassis.
            ステップ 3   UCS-A /chassis/server # show adapter

            Displays the list of interface cards installed in the server by their PID number. 

            switch-A # scope chassis-2 server10
switch-A /chassis-2 # show adapter

Server 1/1:
Adapter PID Vendor Serial Operational State
------- ---------- ----------------- ------------ -----------------
1 N20-AE0002 Cisco Systems Inc EXM12510017 Operable
2 N20-AE0003 Cisco Systems Inc EXM12510018 Operable

switch-A /server-qual #

            Viewing Installed Devices Using the KVM Console

            手順
              ステップ 1   In your web browser, type or select the web link for Cisco UCS Manager GUI.

              例:

              The default web link is http://UCSManager_IP or https://UCSManager_IP . In a standalone configuration, UCSManager_IP is the IP address for the management port on the fabric interconnect. In a cluster configuration, UCSManager_IP is the IP address assigned to Cisco UCS Manager.

              ステップ 2   On the Cisco UCS Manager launch page, click Launch KVM Manager.
              ステップ 3   If a Security Alert dialog box appears, click Yes to accept the security certificate and continue.
              ステップ 4   On the UCS - KVM Launch Manager Login page, do the following:
              1. Enter your Cisco UCS username and password.
              2. 任意: If your Cisco UCS implementation includes multiple domains, select the appropriate domain from the Domain drop-down list.
              3. Click OK.
              ステップ 5   In the Service Profiles table of the KVM Launch Manager, do the following:
              1. Locate the row containing the service profile and associated server on which you want to view the installed devices.
              2. In the Launch KVM column for that server, click Launch.

                The KVM console opens in a separate window.

                ヒント   

                If the Caps Lock key on your keyboard is on when you open a KVM session, and you subsequently turn off your Caps Lock key, the KVM console may continue to act as if Caps Lock is turned on. To synchronize the KVM console and your keyboard, press Caps Lock once without the KVM console in focus and then press Caps Lock again with the KVM console in focus.

              ステップ 6   Reboot the server and observe the information about the installed devices on the console screen during bootup.

              このドキュメントは役に立ちましたか?

              Feedbackフィードバック

              シスコに問い合わせ