この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
この章では、Cisco Secure ACS の以前のリリースから Cisco ISE へのデータ移行に関する詳細情報を提供します。
以前のリリースの Cisco Secure ACS データを Cisco Secure ACS リリース 5.5 または 以降の状態に移行することで、移行ツールを使用して Cisco ISE リリース 2.3 アプライアンスに移行できるようになります。
お使いの環境で Cisco Secure ACS リリース 3.x を実行している場合は、Cisco Secure ACS リリース 4.x の移行サポート バージョンにアップグレード。
ステップ 1 | 『Installation Guide for Cisco Secure ACS Solution Engine 4.2』の説明に従って、Cisco Secure ACS リリース 3.x のアップグレード パスを確認します。 |
ステップ 2 | 使用している Cisco Secure ACS Release 3.x サーバを Cisco Secure ACS Release 4.x の移行サポート バージョンにアップグレードします。たとえば、Cisco Secure ACS 4.2.0.124、または Cisco Secure ACS 4.2.1 リリースのいずれかにアップグレードします。 |
ステップ 3 | アップグレード後、Cisco Secure ACS リリース 4.x から 移行方法を示した手順を実行します。 |
お使いの環境で Cisco Secure ACS リリース 4.x の移行サポート バージョンのいずれも実行していない場合は、Cisco Secure ACS リリース 4.x から Cisco Secure ACS リリース 4.2 に移行可能なポイントにアップグレードします。
ご使用の環境で Cisco Secure ACS リリース 5.x を実行している場合は、Cisco Secure ACS リリース 5.5 または 以降にアップグレードする必要があります。
内部ユーザを Cisco Secure ACS 5.x から Cisco ISE に移行するには、Cisco Secure ACS 5.5 パッチ 4 以降または ACS 5.6 または ACS 5.7 パッチ 1 以降あるいは ACS 5.8 をインストールしてから移行を開始する必要があります。