CLI セッションのプロトコル設定
多くの Prime Infrastructure のワイヤレス機能(自律アクセス ポイントおよびコントローラのコマンドライン インターフェイス(CLI)テンプレートや移行テンプレートなど)では、自律アクセス ポイントまたはコントローラに対して CLI コマンドを実行する必要があります。これらの CLI コマンドを入力するには、Telnet または SSH セッションを確立します。CLI セッション ページでは、セッション プロトコルを選択できます。
CLI テンプレートでは、質問に対する回答操作(コマンドに対して「はい(Yes)」または「いいえ(No)」で回答する、Enter キーを押して続行する、など)は不要です。これは Prime Infrastructure によって自動的に実行されます。
手順
ステップ 1 |
の順に選択します。 |
ステップ 2 |
[コントローラ セッション プロトコル(Controller Session Protocol)] を選択します。[SSH] または [Telnet] を選択できます([SSH] がデフォルト)。 |
ステップ 3 |
[Autonomous AP セッション プロトコル(Autonomous AP Session Protocol)] を選択します。[SSH] または [Telnet] を選択できます([SSH] がデフォルト)。 |
ステップ 4 |
デフォルトでは、[検出時に Autonomous AP 移行を実行(Run Autonomous AP Migration Analysis on discovery)] オプション ボタンは [いいえ(No)] に設定されています。Autonomous AP を検出し、移行分析を実行する場合は、[はい(Yes)] を選択します。 |
ステップ 5 |
[保存(Save)] をクリックします。 |