Problemi comuni relativi al debug di RADIUS, PAP e CHAP

Opzioni per il download

  • PDF     (186.0 KB)
    Visualizza con Adobe Reader su diversi dispositivi
  • ePub     (88.8 KB)
    Visualizza in diverse app su iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (83.0 KB)
    Visualizza su dispositivo Kindle o tramite app Kindle su più dispositivi
Aggiornato:19 gennaio 2006
ID documento:13862

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

Introduzione

In questo documento vengono esaminati i problemi di debug comuni relativi a RADIUS quando si utilizza il protocollo PAP (Password Authentication Protocol) o il protocollo CHAP (Challenge Handshake Authentication Protocol). Sono disponibili le impostazioni comuni per Microsoft Windows 95, Windows NT, Windows 98 e Windows 2000, nonché esempi di configurazioni ed esempi di debug corretti e non corretti.

Operazioni preliminari

Convenzioni

Per ulteriori informazioni sulle convenzioni usate, consultare il documento Cisco sulle convenzioni nei suggerimenti tecnici.

Prerequisiti

Non sono previsti prerequisiti specifici per questo documento.

Componenti usati

Per questo documento, è stato usato il software Cisco IOS® versione 11.2 e successive.

Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è operativa, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.

Impostazioni comuni del PC

Windows 95

Seguire le istruzioni fornite di seguito:

  1. Nella finestra Connessione remota, selezionare il nome della connessione, quindi File > Proprietà.

  2. Nella scheda Tipo server verificare se la casella Richiedi password crittografata al di sotto Tipo di server di connessione remota è selezionata.

    • Se questa casella è selezionata, significa che il PC accetta solo l'autenticazione CHAP.

    • Se questa casella non è selezionata, significa che il PC accetta l'autenticazione PAP o CHAP.

Windows NT

Seguire le istruzioni fornite di seguito:

  1. Nella finestra Connessione remota, selezionare il nome della connessione, quindi selezionare File > Proprietà.

  2. Verificare le impostazioni nella scheda Protezione:

    • Se la casella di controllo Accetta qualsiasi autenticazione è selezionata, significa che il PC accetta PAP o CHAP.

    • Se la casella di controllo Accetta solo autenticazione crittografata è selezionata, il PC accetta solo l'autenticazione CHAP.

Windows 98

Seguire le istruzioni fornite di seguito:

  1. Nella finestra Connessione remota selezionare il nome della connessione e quindi Proprietà.

  2. Nella scheda Tipi di server verificare le impostazioni nell'area Opzioni avanzate:

    • Se la casella di controllo Richiedi password crittografata è deselezionata, il PC accetta l'autenticazione PAP o CHAP.

    • Se la casella Richiedi password crittografata è selezionata, il PC accetta solo l'autenticazione CHAP.

Windows 2000

Seguire le istruzioni fornite di seguito:

  1. In Rete e connessioni remote selezionare il nome della connessione e quindi Proprietà.

  2. Nella scheda Protezione, controllare le impostazioni in Avanzate > Impostazioni > Consenti questi protocolli area:

    • Se la casella Password non crittografata (PAP) è selezionata, il PC accetta PAP.

    • Se la casella CHAP (Challenge Handshake Authentication Protocol) è selezionata, il PC accetta la protezione CHAP in base alla RFC 1994.

    • Se la casella Microsoft CHAP (MS-CHAP) è selezionata, il PC accetta MS-CHAP versione 1 e non accetta la protezione CHAP in base alla RFC 1994.

Configurazioni ed esempi di debug

RADIUS e PAP

Configurazione - RADIUS e PAP 
Current configuration:
!
version 11.2
service timestamps debug uptime
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname rtpkrb
!
aaa new-model
!

!--- The following four command lines are specific to !--- Cisco IOS 11.2 and later, up until 11.3.3.T. !--- See below this configuration for commands !--- for other Cisco IOS releases.

!
aaa authentication login default radius local
aaa authentication ppp default if-needed radius local
aaa authorization exec radius if-authenticated
aaa authorization network radius if-authenticated
!
enable secret 5 $1$pkX.$JdAySRE1SbdbDe7bj0wyt0
enable password ww
!
username john password 0 doe
username cse password 0 csecse
ip host rtpkrb 10.31.1.5
ip domain-name RTP.CISCO.COM
ip name-server 171.68.118.103
!
interface Loopback0
ip address 1.1.1.1 255.255.255.0
!
interface Ethernet0
ip address 10.31.1.5 255.255.0.0
no mop enabled
!
interface Serial0
no ip address
no ip mroute-cache
shutdown
!
interface Serial1
no ip address
shutdown
!
interface Async1
ip unnumbered Ethernet0
encapsulation ppp
async mode dedicated
peer default ip address pool async
no cdp enable
ppp authentication pap
!
ip local pool async 15.15.15.15
ip classless
ip route 0.0.0.0 0.0.0.0 10.31.1.1
!
snmp-server community public RW
snmp-server host 171.68.118.100 traps public
radius-server host 171.68.118.101 auth-port 1645 acct-port 1646
radius-server key cisco
!
line con 0
line 1
session-timeout 20 
exec-timeout 20 0
password ww
autoselect during-login
autoselect ppp
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
line 2
modem InOut
speed 38400
flowcontrol hardware
line 3 16
line aux 0
line vty 0 4
exec-timeout 0 0
password ww
!
end

Comandi per altre versioni di Cisco IOS

Nota: per utilizzare questi comandi, rimuovere i comandi evidenziati dalla configurazione precedente e incollarli in, come richiesto dalla versione Cisco IOS in uso.

Cisco IOS 11.3.3.T fino a 12.0.5.T

aaa authen login default radius local
aaa authen ppp default if-needed radius local
aaa authorization exec default radius if-authenticated
aaa authorization network default radius if-authenticated

Cisco IOS 12.0.5.T e versioni successive

aaa authen login default group radius local
aaa authen ppp default if-needed group radius local
aaa authorization exec default group radius if-authenticated
aaa authorization network default group radius if-authenticated

Debug di esempio - RADIUS e PAP

Nota: nell'output del comando debug, il testo in grassetto evidenzia i problemi relativi al comando debug. Il testo normale indica un debug corretto.

rtpkrb#
rtpkrb#sho deb
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
PPP:
PPP authentication debugging is on
PPP protocol negotiation debugging is on
Radius protocol debugging is on
rtpkrb#
4d02h: As1 LCP: I CONFREQ [Closed] id 0 len 20
4d02h: As1 LCP: ACCM 0x00000000 (0x020600000000)
4d02h: As1 LCP: MagicNumber 0x00001F67 (0x050600001F67)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: Lower layer not up, discarding packet
%LINK-3-UPDOWN: Interface Async1, changed state to up
4d02h: As1 PPP: Treating connection as a dedicated line
4d02h: As1 PPP: Phase is ESTABLISHING, Active Open
4d02h: As1 LCP: O CONFREQ [Closed] id 85 len 24
4d02h: As1 LCP: ACCM 0x000A0000 (0x0206000A0000)
4d02h: As1 LCP: AuthProto PAP (0x0304C023)
4d02h: As1 LCP: MagicNumber 0xF54252D5 (0x0506F54252D5)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)


PC insists on doing chap ('accept encrypted authentication only'), 
   but router is set up for pap:
As1 LCP: I CONFNAK [REQsent] id 98 len 12
As1 LCP: AuthProto 0xC123 (0x0308C12301000001)
As1 LCP: O CONFREQ [REQsent] id 99 len 24
As1 LCP: ACCM 0x000A0000 (0x0206000A0000)
As1 LCP: AuthProto PAP (0x0304C023)
As1 LCP: MagicNumber 0xF54D1AF8 (0x0506F54D1AF8)
As1 LCP: PFC (0x0702)
As1 LCP: ACFC (0x0802)
As1 LCP: I CONFREJ [REQsent] id 99 len 8
As1 LCP: AuthProto PAP (0x0304C023)
As1 PPP: Closing connection because remote won't authenticate

4d02h: As1 LCP: I CONFACK [REQsent] id 85 len 24
4d02h: As1 LCP: ACCM 0x000A0000 (0x0206000A0000)
4d02h: As1 LCP: AuthProto PAP (0x0304C023)
4d02h: As1 LCP: MagicNumber 0xF54252D5 (0x0506F54252D5)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: I CONFREQ [ACKrcvd] id 0 len 20
4d02h: As1 LCP: ACCM 0x00000000 (0x020600000000)
4d02h: As1 LCP: MagicNumber 0x00001F67 (0x050600001F67)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: O CONFACK [ACKrcvd] id 0 len 20
4d02h: As1 LCP: ACCM 0x00000000 (0x020600000000)
4d02h: As1 LCP: MagicNumber 0x00001F67 (0x050600001F67)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: State is Open
4d02h: As1 PPP: Phase is AUTHENTICATING, by this end
4d02h: As1 PAP: I AUTH-REQ id 14 len 19 from "ddunlap"
4d02h: As1 PAP: Authenticating peer ddunlap
4d02h: AAA/AUTHEN: create_user (0x15AD58) user='ddunlap' ruser='' 
   port='Async1' rem_addr='async' authen_type=PAP service=PPP priv=1
4d02h: AAA/AUTHEN/START (1953436918): port='Async1' list='' 
   action=LOGIN service=PPP
4d02h: AAA/AUTHEN/START (1953436918): using "default" list
4d02h: AAA/AUTHEN (1953436918): status = UNKNOWN
4d02h: AAA/AUTHEN/START (1953436918): Method=RADIUS
4d02h: RADIUS: Initial Transmit id 7 171.68.118.101:1645, 
   Access-Request, len 77
4d02h: Attribute 4 6 0A1F0105
4d02h: Attribute 5 6 00000001
4d02h: Attribute 61 6 00000000
4d02h: Attribute 1 9 6464756E
4d02h: Attribute 2 18 7882E0A5
4d02h: Attribute 6 6 00000002
4d02h: Attribute 7 6 00000001


Radius server is down - produces ERROR - since user is not 
   in local database, failover to local FAILs
As1 PAP: I AUTH-REQ id 16 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=16 already in progress
As1 PAP: I AUTH-REQ id 17 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=17 already in progress
RADIUS: Retransmit id 9
As1 PAP: I AUTH-REQ id 18 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=18 already in progress
As1 PAP: I AUTH-REQ id 19 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=19 already in progress
As1 PAP: I AUTH-REQ id 20 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=20 already in progress
RADIUS: Retransmit id 9
As1 PAP: I AUTH-REQ id 21 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=21 already in progress
As1 PAP: I AUTH-REQ id 22 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=22 already in progress
RADIUS: Retransmit id 9
As1 PAP: I AUTH-REQ id 23 len 19 from "ddunlap"
As1 AUTH: Duplicate authentication request id=23 already in progress
As1 LCP: I TERMREQ [Open] id 1 len 8 (0x000002CE)
As1 LCP: O TERMACK [Open] id 1 len 4
As1 PPP: Phase is TERMINATING
RADIUS: No response for id 9
%RADIUS-3-ALLDEADSERVER: No active radius servers found. Id 9.
RADIUS: No response from server
AAA/AUTHEN (3025998849): status = ERROR
AAA/AUTHEN/START (3025998849): Method=LOCAL
AAA/AUTHEN (3025998849): status = FAIL


Key in router does not match that of server:
RADIUS: Received from id 21 171.68.118.101:1645, Access-Reject, len 20
RADIUS: Reply for 21 fails decrypt


NT client sends 'DOMAIN\user' and Radius server expects 'user':
RADIUS: Received from id 11 171.68.118.101:1645, Access-Reject, len 20
AAA/AUTHEN (1406749115): status = FAIL
As1 PAP: O AUTH-NAK id 25 len 32 msg is "Password validation failure"
As1 PPP: Phase is TERMINATING
As1 LCP: O TERMREQ [Open] id 108 len 4
AAA/AUTHEN: free_user (0xDA520) user='CISCO\ddunlap' ruser='' 
   port='Async1' rem_addr='async' authen_type=PAP service=PPP priv=1


Radius server refuses user because user user enters bad password, 
   or both userid & password are bad:
RADIUS: Received from id 12 171.68.118.101:1645, Access-Reject, len 20
AAA/AUTHEN (733718529): status = FAIL
As1 PAP: O AUTH-NAK id 26 len 32 msg is "Password validation failure"
As1 PPP: Phase is TERMINATING
As1 LCP: O TERMREQ [Open] id 111 len 4
AAA/AUTHEN: free_user (0x15B030) user='ddunlap' ruser='' 
   ='Async1' rem_addr='async' authen_type=PAP service=PPP priv=1


User passes authentication (i.e. username/password is good) 
   but fails authorization (profile not set up for Service-Type=Framed &
   Framed-Protocol=PPP):
RADIUS: Received from id 13 171.68.118.101:1645, Access-Accept, len 20
RADIUS: saved authorization data for user 15AD58 at 15ADF0
AAA/AUTHEN (56862281): status = PASS
AAA/AUTHOR/LCP As1: Authorize LCP
AAA/AUTHOR/LCP: Async1: (959162008): user='cse'
AAA/AUTHOR/LCP: Async1: (959162008): send AV service=ppp
AAA/AUTHOR/LCP: Async1: (959162008): send AV protocol=lcp
AAA/AUTHOR/LCP: Async1: (959162008): Method=RADIUS
RADIUS: no appropriate authorization type for user.
AAA/AUTHOR (959162008): Post authorization status = FAIL
AAA/AUTHOR/LCP As1: Denied
AAA/AUTHEN: free_user (0x15AD58) user='cse' ruser='' 
   port='Async1' rem_addr='async' authen_type=PAP service=PPP priv=1
As1 PAP: O AUTH-NAK id 27 len 25 msg is "Authorization failed"

4d02h: RADIUS: Received from id 7 171.68.118.101:1645, Access-Accept, len 32
4d02h: Attribute 6 6 00000002
4d02h: Attribute 7 6 00000001
4d02h: RADIUS: saved authorization data for user 15AD58 at 16C7F4
4d02h: AAA/AUTHEN (1953436918): status = PASS
4d02h: AAA/AUTHOR/LCP As1: Authorize LCP
4d02h: AAA/AUTHOR/LCP: Async1: (2587233868): user='ddunlap'
4d02h: AAA/AUTHOR/LCP: Async1: (2587233868): send AV service=ppp
4d02h: AAA/AUTHOR/LCP: Async1: (2587233868): send AV protocol=lcp
4d02h: AAA/AUTHOR/LCP: Async1: (2587233868): Method=RADIUS
4d02h: AAA/AUTHOR (2587233868): Post authorization status = PASS_REPL
4d02h: AAA/AUTHOR/LCP As1: Processing AV service=ppp
4d02h: As1 PAP: O AUTH-ACK id 14 len 5
4d02h: As1 PPP: Phase is UP
4d02h: AAA/AUTHOR/FSM As1: (0): Can we start IPCP?
4d02h: AAA/AUTHOR/FSM: Async1: (423372862): user='ddunlap'
4d02h: AAA/AUTHOR/FSM: Async1: (423372862): send AV service=ppp
4d02h: AAA/AUTHOR/FSM: Async1: (423372862): send AV protocol=ip
4d02h: AAA/AUTHOR/FSM: Async1: (423372862): Method=RADIUS
4d02h: AAA/AUTHOR (423372862): Post authorization status = PASS_REPL
4d02h: AAA/AUTHOR/FSM As1: We can start IPCP
4d02h: As1 IPCP: O CONFREQ [Closed] id 17 len 10
4d02h: As1 IPCP: Address 10.31.1.5 (0x03060A1F0105)
4d02h: As1 IPCP: I CONFREQ [REQsent] id 1 len 34
4d02h: As1 IPCP: Address 0.0.0.0 (0x030600000000)
4d02h: As1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
4d02h: As1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
4d02h: As1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
4d02h: As1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
4d02h: AAA/AUTHOR/IPCP As1: Start. Her address 0.0.0.0, we want 0.0.0.0
4d02h: AAA/AUTHOR/IPCP As1: Processing AV service=ppp
4d02h: AAA/AUTHOR/IPCP As1: Authorization succeeded
4d02h: AAA/AUTHOR/IPCP As1: Done. Her address 0.0.0.0, we want 0.0.0.0
4d02h: As1 IPCP: Using pool 'async'
4d02h: As1 IPCP: Pool returned 15.15.15.15
4d02h: As1 IPCP: O CONFREJ [REQsent] id 1 len 22
4d02h: As1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
4d02h: As1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
4d02h: As1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
4d02h: As1 IPCP: I CONFACK [REQsent] id 17 len 10
4d02h: As1 IPCP: Address 10.31.1.5 (0x03060A1F0105)
%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to up
4d02h: As1 IPCP: I CONFREQ [ACKrcvd] id 2 len 16
4d02h: As1 IPCP: Address 0.0.0.0 (0x030600000000)
4d02h: As1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
4d02h: AAA/AUTHOR/IPCP As1: Start. Her address 0.0.0.0, we want 15.15.15.15
4d02h: AAA/AUTHOR/IPCP As1: Processing AV service=ppp
4d02h: AAA/AUTHOR/IPCP As1: Authorization succeeded
4d02h: AAA/AUTHOR/IPCP As1: Done. Her address 0.0.0.0, we want 15.15.15.15
4d02h: As1 IPCP: O CONFNAK [ACKrcvd] id 2 len 16
4d02h: As1 IPCP: Address 15.15.15.15 (0x03060F0F0F0F)
4d02h: As1 IPCP: PrimaryDNS 171.68.118.103 (0x8106AB447667)
4d02h: As1 IPCP: I CONFREQ [ACKrcvd] id 3 len 16
4d02h: As1 IPCP: Address 15.15.15.15 (0x03060F0F0F0F)
4d02h: As1 IPCP: PrimaryDNS 171.68.118.103 (0x8106AB447667)
4d02h: AAA/AUTHOR/IPCP As1: Start. Her address 15.15.15.15, we want 15.15.15.15
4d02h: AAA/AUTHOR/IPCP: Async1: (4204275250): user='ddunlap'
4d02h: AAA/AUTHOR/IPCP: Async1: (4204275250): send AV service=ppp
4d02h: AAA/AUTHOR/IPCP: Async1: (4204275250): send AV protocol=ip
4d02h: AAA/AUTHOR/IPCP: Async1: (4204275250): send AV addr*15.15.15.15
4d02h: AAA/AUTHOR/IPCP: Async1: (4204275250): Method=RADIUS
4d02h: AAA/AUTHOR (4204275250): Post authorization status = PASS_REPL
4d02h: AAA/AUTHOR/IPCP As1: Reject 15.15.15.15, using 15.15.15.15
4d02h: AAA/AUTHOR/IPCP As1: Processing AV service=ppp
4d02h: AAA/AUTHOR/IPCP As1: Processing AV addr*15.15.15.15
4d02h: AAA/AUTHOR/IPCP As1: Authorization succeeded
4d02h: AAA/AUTHOR/IPCP As1: Done. Her address 15.15.15.15, we want 15.15.15.15
4d02h: As1 IPCP: O CONFACK [ACKrcvd] id 3 len 16
4d02h: As1 IPCP: Address 15.15.15.15 (0x03060F0F0F0F)
4d02h: As1 IPCP: PrimaryDNS 171.68.118.103 (0x8106AB447667)
4d02h: As1 IPCP: State is Open
4d02h: As1 IPCP: Install route to 15.15.15.15
rtpkrb#

RADIUS e CHAP

Configurazione - RADIUS e CHAP 
Current configuration:
!
version 11.2
service timestamps debug uptime
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname rtpkrb
!
aaa new-model
!

!--- The following four command lines are specific to !--- Cisco IOS 11.2 and later, up until 11.3.3.T. !--- See below this configuration for commands !--- for other Cisco IOS releases.

!
aaa authentication login default radius local
aaa authentication ppp default if-needed radius local
aaa authorization exec radius if-authenticated
aaa authorization network radius if-authenticated
!
enable secret 5 $1$pkX.$JdAySRE1SbdbDe7bj0wyt0
enable password ww
!
username john password 0 doe
username cse password 0 csecse
ip host rtpkrb 10.31.1.5
ip name-server 171.68.118.103
!
interface Loopback0
ip address 1.1.1.1 255.255.255.0
!
interface Ethernet0
ip address 10.31.1.5 255.255.0.0
no mop enabled
!
interface Serial0
no ip address
no ip mroute-cache
shutdown
!
interface Serial1
no ip address
shutdown
!
interface Async1
ip unnumbered Ethernet0
encapsulation ppp
async mode dedicated
peer default ip address pool async
no cdp enable
ppp authentication chap
!
ip local pool async 15.15.15.15
ip classless
ip route 0.0.0.0 0.0.0.0 10.31.1.1
!
snmp-server community public RW
snmp-server host 171.68.118.100 traps public
radius-server host 171.68.118.101 auth-port 1645 acct-port 1646
radius-server key cisco
!
line con 0
line 1
session-timeout 20 
exec-timeout 20 0
password ww
autoselect during-login
autoselect ppp
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
line 2
modem InOut
speed 38400
flowcontrol hardware
line 3 16
line aux 0
line vty 0 4
exec-timeout 0 0
password ww
!
end

Comandi per altre versioni di Cisco IOS

Nota: per utilizzare questi comandi, rimuovere i comandi evidenziati dalla configurazione precedente e incollarli in, come richiesto dalla versione Cisco IOS in uso.

Cisco IOS 11.3.3.T fino a 12.0.5.T 

aaa authen login default radius local
aaa authen ppp default if-needed radius local
aaa authorization exec default radius if-authenticated
aaa authorization network default radius if-authenticated

Cisco IOS 12.0.5.T e versioni successive 

aaa authen login default group radius local 
aaa authen ppp default if-needed group radius local 
aaa authorization exec default group radius if-authenticated 
aaa authorization network default group radius if-authenticated

Debug di esempio - RADIUS e CHAP

Nota: nell'output del comando debug, il testo in grassetto e in corsivo evidenzia i problemi relativi al comando debug. Il testo normale indica un debug corretto.

rtpkrb#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
PPP:
PPP authentication debugging is on
PPP protocol negotiation debugging is on
Radius protocol debugging is on
rtpkrb#
4d02h: As1 LCP: I CONFREQ [Closed] id 0 len 20
4d02h: As1 LCP: ACCM 0x00000000 (0x020600000000)
4d02h: As1 LCP: MagicNumber 0x0000405F (0x05060000405F)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: Lower layer not up, discarding packet
%LINK-3-UPDOWN: Interface Async1, changed state to up
4d02h: As1 PPP: Treating connection as a dedicated line
4d02h: As1 PPP: Phase is ESTABLISHING, Active Open
4d02h: As1 LCP: O CONFREQ [Closed] id 87 len 25
4d02h: As1 LCP: ACCM 0x000A0000 (0x0206000A0000)
4d02h: As1 LCP: AuthProto CHAP (0x0305C22305)
4d02h: As1 LCP: MagicNumber 0xF5445B55 (0x0506F5445B55)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: I CONFACK [REQsent] id 87 len 25
4d02h: As1 LCP: ACCM 0x000A0000 (0x0206000A0000)
4d02h: As1 LCP: AuthProto CHAP (0x0305C22305)
4d02h: As1 LCP: MagicNumber 0xF5445B55 (0x0506F5445B55)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: I CONFREQ [ACKrcvd] id 0 len 20
4d02h: As1 LCP: ACCM 0x00000000 (0x020600000000)
4d02h: As1 LCP: MagicNumber 0x0000405F (0x05060000405F)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: O CONFACK [ACKrcvd] id 0 len 20
4d02h: As1 LCP: ACCM 0x00000000 (0x020600000000)
4d02h: As1 LCP: MagicNumber 0x0000405F (0x05060000405F)
4d02h: As1 LCP: PFC (0x0702)
4d02h: As1 LCP: ACFC (0x0802)
4d02h: As1 LCP: State is Open
4d02h: As1 PPP: Phase is AUTHENTICATING, by this end
4d02h: As1 CHAP: O CHALLENGE id 11 len 27 from "rtpkrb"
4d02h: As1 CHAP: I RESPONSE id 11 len 28 from "chapadd"
4d02h: AAA/AUTHEN: create_user (0x15AD58) user='chapadd' ruser='' 
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1
4d02h: AAA/AUTHEN/START (575703226): port='Async1' list='' 
   action=LOGIN service=PPP
4d02h: AAA/AUTHEN/START (575703226): using "default" list
4d02h: AAA/AUTHEN (575703226): status = UNKNOWN
4d02h: AAA/AUTHEN/START (575703226): Method=RADIUS
4d02h: RADIUS: Initial Transmit id 8 171.68.118.101:1645, 
   Access-Request, len 78
4d02h: Attribute 4 6 0A1F0105
4d02h: Attribute 5 6 00000001
4d02h: Attribute 61 6 00000000
4d02h: Attribute 1 9 63686170
4d02h: Attribute 3 19 0B895D57
4d02h: Attribute 6 6 00000002
4d02h: Attribute 7 6 00000001


Radius server is down - produces ERROR - since user is not 
   in local database, failover to local FAILs:
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
RADIUS: Retransmit id 15
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
RADIUS: Retransmit id 15
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
RADIUS: Retransmit id 15
As1 CHAP: I RESPONSE id 12 len 28 from "chapadd"
As1 AUTH: Duplicate authentication request id=12 already in progress
As1 LCP: I TERMREQ [Open] id 1 len 8 (0x000002CE)
As1 LCP: O TERMACK [Open] id 1 len 4
As1 PPP: Phase is TERMINATING
RADIUS: id 15, requester hung up.
RADIUS: No response for id 15
RADIUS: No response from server
AAA/AUTHEN (1866705040): status = ERROR
AAA/AUTHEN/START (1866705040): Method=LOCAL
AAA/AUTHEN (1866705040): status = FAIL
As1 CHAP: Unable to validate Response. Username chapadd: Authentication failure
As1 CHAP: O FAILURE id 12 len 26 msg is "Authentication failure"
AAA/AUTHEN: free_user (0x1716B8) user='chapadd' ruser='' 
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1


Key in router does not match that of server:
RADIUS: Received from id 21 171.68.118.101:1645, Access-Reject, len 20
RADIUS: Reply for 21 fails decrypt

NT client sends 'DOMAIN\user' and Radius server expects 'user':
RADIUS: Received from id 16 171.68.118.101:1645, Access-Reject, len 20
AAA/AUTHEN (2974782384): status = FAIL
As1 CHAP: Unable to validate Response. Username CISCO\chapadd: 
   Authentication failure
As1 CHAP: O FAILURE id 13 len 26 msg is "Authentication failure"
As1 PPP: Phase is TERMINATING
As1 LCP: O TERMREQ [Open] id 131 len 4
AAA/AUTHEN: free_user (0x171700) user='CISCO\chapadd' ruser='' 
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1


Radius server refuses user because user is set up for pap, 
   user enters bad password, or both userid & password are bad:
RADIUS: Received from id 17 171.68.118.101:1645, Access-Reject, len 20
AAA/AUTHEN (3898168391): status = FAIL
As1 CHAP: Unable to validate Response. Username ddunlap: Authentication failure
As1 CHAP: O FAILURE id 14 len 26 msg is "Authentication failure"
As1 PPP: Phase is TERMINATING
As1 LCP: O TERMREQ [Open] id 134 len 4
AAA/AUTHEN: free_user (0x1716B8) user='ddunlap' ruser='' 
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1

User PASSes authentication (i.e. username/password is good) 
   but FAILs authorization (profile not set up for Service-Type=Framed &
Framed-Protocol=PPP):
RADIUS: Received from id 19 171.68.118.101:1645, Access-Accept, len 20
AAA/AUTHEN (2006894701): status = PASS
AAA/AUTHOR/LCP As1: Authorize LCP
AAA/AUTHOR/LCP: Async1: (2370106832): user='noauth'
AAA/AUTHOR/LCP: Async1: (2370106832): send AV service=ppp
AAA/AUTHOR/LCP: Async1: (2370106832): send AV protocol=lcp
AAA/AUTHOR/LCP: Async1: (2370106832): Method=RADIUS
RADIUS: no appropriate authorization type for user.
AAA/AUTHOR (2370106832): Post authorization status = FAIL
AAA/AUTHOR/LCP As1: Denied

4d02h: RADIUS: Received from id 8 171.68.118.101:1645, Access-Accept, len 32
4d02h: Attribute 6 6 00000002
4d02h: Attribute 7 6 00000001
4d02h: AAA/AUTHEN (575703226): status = PASS
4d02h: AAA/AUTHOR/LCP As1: Authorize LCP
4d02h: AAA/AUTHOR/LCP: Async1: (4143416222): user='chapadd'
4d02h: AAA/AUTHOR/LCP: Async1: (4143416222): send AV service=ppp
4d02h: AAA/AUTHOR/LCP: Async1: (4143416222): send AV protocol=lcp
4d02h: AAA/AUTHOR/LCP: Async1: (4143416222): Method=RADIUS
4d02h: AAA/AUTHOR (4143416222): Post authorization status = PASS_REPL
4d02h: AAA/AUTHOR/LCP As1: Processing AV service=ppp
4d02h: As1 CHAP: O SUCCESS id 11 len 4
4d02h: As1 PPP: Phase is UP
4d02h: AAA/AUTHOR/FSM As1: (0): Can we start IPCP?
4d02h: AAA/AUTHOR/FSM: Async1: (1916451991): user='chapadd'
4d02h: AAA/AUTHOR/FSM: Async1: (1916451991): send AV service=ppp
4d02h: AAA/AUTHOR/FSM: Async1: (1916451991): send AV protocol=ip
4d02h: AAA/AUTHOR/FSM: Async1: (1916451991): Method=RADIUS
4d02h: AAA/AUTHOR (1916451991): Post authorization status = PASS_REPL
4d02h: AAA/AUTHOR/FSM As1: We can start IPCP
4d02h: As1 IPCP: O CONFREQ [Closed] id 19 len 10
4d02h: As1 IPCP: Address 10.31.1.5 (0x03060A1F0105)
4d02h: As1 IPCP: I CONFREQ [REQsent] id 1 len 34
4d02h: As1 IPCP: Address 0.0.0.0 (0x030600000000)
4d02h: As1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
4d02h: As1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
4d02h: As1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
4d02h: As1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
4d02h: AAA/AUTHOR/IPCP As1: Start. Her address 0.0.0.0, we want 0.0.0.0
4d02h: AAA/AUTHOR/IPCP As1: Processing AV service=ppp
4d02h: AAA/AUTHOR/IPCP As1: Authorization succeeded
4d02h: AAA/AUTHOR/IPCP As1: Done. Her address 0.0.0.0, we want 0.0.0.0
4d02h: As1 IPCP: Using pool 'async'
4d02h: As1 IPCP: Pool returned 15.15.15.15
4d02h: As1 IPCP: O CONFREJ [REQsent] id 1 len 22
4d02h: As1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
4d02h: As1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
4d02h: As1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
4d02h: As1 IPCP: I CONFACK [REQsent] id 19 len 10
4d02h: As1 IPCP: Address 10.31.1.5 (0x03060A1F0105)
4d02h: As1 IPCP: I CONFREQ [ACKrcvd] id 2 len 16
4d02h: As1 IPCP: Address 0.0.0.0 (0x030600000000)
4d02h: As1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
4d02h: AAA/AUTHOR/IPCP As1: Start. Her address 0.0.0.0, we want 15.15.15.15
4d02h: AAA/AUTHOR/IPCP As1: Processing AV service=ppp
4d02h: AAA/AUTHOR/IPCP As1: Authorization succeeded
4d02h: AAA/AUTHOR/IPCP As1: Done. Her address 0.0.0.0, we want 15.15.15.15
4d02h: As1 IPCP: O CONFNAK [ACKrcvd] id 2 len 16
4d02h: As1 IPCP: Address 15.15.15.15 (0x03060F0F0F0F)
4d02h: As1 IPCP: PrimaryDNS 171.68.118.103 (0x8106AB447667)
4d02h: As1 IPCP: I CONFREQ [ACKrcvd] id 3 len 16
4d02h: As1 IPCP: Address 15.15.15.15 (0x03060F0F0F0F)
4d02h: As1 IPCP: PrimaryDNS 171.68.118.103 (0x8106AB447667)
4d02h: AAA/AUTHOR/IPCP As1: Start. Her address 15.15.15.15, we want 15.15.15.15
4d02h: AAA/AUTHOR/IPCP: Async1: (1096193147): user='chapadd'
4d02h: AAA/AUTHOR/IPCP: Async1: (1096193147): send AV service=ppp
4d02h: AAA/AUTHOR/IPCP: Async1: (1096193147): send AV protocol=ip
4d02h: AAA/AUTHOR/IPCP: Async1: (1096193147): send AV addr*15.15.15.15
4d02h: AAA/AUTHOR/IPCP: Async1: (1096193147): Method=RADIUS
4d02h: AAA/AUTHOR (1096193147): Post authorization status = PASS_REPL
4d02h: AAA/AUTHOR/IPCP As1: Reject 15.15.15.15, using 15.15.15.15
4d02h: AAA/AUTHOR/IPCP As1: Processing AV service=ppp
4d02h: AAA/AUTHOR/IPCP As1: Processing AV addr*15.15.15.15
4d02h: AAA/AUTHOR/IPCP As1: Authorization succeeded
4d02h: AAA/AUTHOR/IPCP As1: Done. Her address 15.15.15.15, we want 15.15.15.15
4d02h: As1 IPCP: O CONFACK [ACKrcvd] id 3 len 16
4d02h: As1 IPCP: Address 15.15.15.15 (0x03060F0F0F0F)
4d02h: As1 IPCP: PrimaryDNS 171.68.118.103 (0x8106AB447667)
4d02h: As1 IPCP: State is Open
%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to up
4d02h: As1 IPCP: Install route to 15.15.15.15
rtpkrb#

Comandi debug

Per produrre l'output di esempio del comando debug in questo documento, sono stati usati i comandi debug riportati di seguito.

Nota: prima di usare i comandi di debug, consultare le informazioni importanti sui comandi di debug.

  • debug aaa authentication - Visualizza informazioni sull'autenticazione AAA.

  • debug aaa authorization - Visualizza le informazioni sull'autorizzazione AAA.

  • debug radius: visualizza informazioni di debug dettagliate associate al server RADIUS (Remote Authentication Dial-In User Server).

  • debug ppp negotiation: visualizza i pacchetti PPP trasmessi durante l'avvio del protocollo PPP, dove le opzioni PPP vengono negoziate.

Informazioni correlate

Cronologia delle revisioni

Revisione Data di pubblicazione Commenti
1.0
19-Jan-2006
Versione iniziale

Questo documento ti è stato utile?

FeedbackFeedback

Contattaci

Questo documento si applica a questi prodotti