Oggetti MIB equivalenti per comandi show VoIP

Opzioni per il download

  • PDF     (139.3 KB)
    Visualizza con Adobe Reader su diversi dispositivi
  • ePub     (89.0 KB)
    Visualizza in diverse app su iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (82.2 KB)
    Visualizza su dispositivo Kindle o tramite app Kindle su più dispositivi
Aggiornato:26 ottobre 2005
ID documento:63607

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

Introduzione

Questo documento descrive gli oggetti MIB equivalenti che forniscono le informazioni contenute in vari comandi di verifica Voice over IP (VoIP). Le applicazioni e/o gli script NMS possono potenzialmente utilizzare queste informazioni.

Prerequisiti

Requisiti

Nessun requisito specifico previsto per questo documento.

Componenti usati

Il documento può essere consultato per tutte le versioni software. Tuttavia, è stato scritto specificamente per un router Cisco serie 3600 con scheda NM-2V.

Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è operativa, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.

Convenzioni

Per ulteriori informazioni sulle convenzioni usate, consultare il documento Cisco sulle convenzioni nei suggerimenti tecnici.

Configurazione

L'output mostrato di seguito mostra una parte rilevante della configurazione usata dal documento: 

VoipRouter#show running-configuration
Building configuration...

Current configuration : 5412 bytes
!
version 12.3
...
!
snmp-server community public RO
!
...
!
voice-port 2/0/0
!
...
!
dial-peer voice 2000 pots
 destination-pattern 2000
 port 2/0/0
!
dial-peer voice 1000 voip
 destination-pattern 1000
 session target ipv4:172.16.99.22
!
...
end

Comandi VoIP

Le sezioni seguenti mostrano gli oggetti MIB che corrispondono all'output dei seguenti comandi di verifica VoIP:

Le informazioni contenute nei comandi di verifica VoIP possono essere estratte da IF-MIB, CISCO-VOICE-IF-MIB, CISCO-VOICE-ANALOG-IF-MIB, CISCO-VOICE-DIAL-CONTROL-MIB, DIAL-CONTROL-MIB e CISCO-DSP-MGMT-MIB.

Nota: in questi esempi, il segmento Telefonia è indicizzato da 1102799 e il segmento H.323 da 1102966.

show voice port summary

Nota: il testo in grassetto nel comando show voice port summary è evidenziato nella sezione Equivalent MIB Objects. 

VoipRouter#show voice port summary
                                      IN           OUT
PORT      CH   SIG-TYPE   ADMIN OPER  STATUS       STATUS   EC
========= == ============ ===== ====  ========     ======== ==
2/0/0(A1) --  fxs-ls(A2)  up(A3)up(A4) off-hook(A5) idle     y(A6) 
2/0/1     --  fxs-ls      up    dorm   on-hook      idle     y

Oggetti MIB equivalenti 

A1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

A2  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)

A3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

A4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

A5  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)

A6  —  CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)

Nota: Nessun oggetto MIB mantiene il valore contenuto nella parte CH del comando show voice port summary quando si utilizza la scheda NM-2V.

mostra riepilogo chiamate vocali

Nota: il testo in grassetto nel comando show voice call summary è evidenziato nella sezione Equivalent MIB Objects. 

VoipRouter#show voice call summary
PORT         CODEC      VAD   VTSP STATE            VPM STATE
============ ========   ===   ==================== ======================
2/0/0(B1)    g729r8(B2) y(B3) S_CONNECT             FXSLS_CONNECT            
2/0/1         -         -       -                   FXSLS_ONHOOK

Oggetti MIB equivalenti 

B1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

B2  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.
       1102966.1 = INTEGER: ietfg729r8000(25)

B3  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.
       1102966.1 = INTEGER: true(1)

Nota: nessun oggetto MIB mantiene singolarmente gli stati VTSP (Voice Telephony Service Provider) e VPM. Utilizzare callActiveCallState da DIAL-CONTROL-MIB.

show dial-peer voice summary

Nota: il testo in grassetto nel comando show dial-peer voice summary è evidenziato nella sezione Equivalent MIB Objects. 

VoipRouter#show dial-peer voice summary
dial-peer hunt 0
             AD                                        PRE  PASS
TAG      TYPE     MIN     OPER    PREFIX DEST-PATTERN  FER  THRU SESS-TARGET   PORT
2000(C1) pots(C2)  up(C3)  up(C4) 9(C5)   2000(C6)     0(C7)                2/0/0(C8)
1000     voip      up      up             1000         0    syst ipv4:172.16.99.22(C9)

Oggetti MIB equivalenti 

C1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90

    —  DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37
C2  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)

C3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

C4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

C5  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9

C6  —  DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000

C7  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0

C8  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

C9  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 = 
       STRING: ipv4:172.16.99.22

Nota: No MIB Object mantiene il valore contenuto nella parte del metodo PASS THRU del comando show dial-peer summary.

show call active voice brief

Nota: il testo in grassetto nel comando show call active voice brief è evidenziato nella sezione Equivalent MIB Objects. 

VoIPRouter#show call active voice brief 
   
<ID>:<start>hs.<index> +<connect> pid:<peer_id> <dir> <addr> <state>  
  dur hh:mm:ss tx:<packets>/<bytes> rx:<packets>/<bytes>  
 IP <ip>:<udp> rtt:<time>ms pl:<play>/<gap>ms lost:<lost>/<early>/<late>  
  delay:<last>/<min>/<max>ms <codec>  
  MODEMPASS <method> buf:<fills>/<drains> loss <overall%>  
<multipkt>/<corrected>  
   last <buf event time>s dur:<Min>/<Max>s  
 FR <protocol> [int dlci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>  
  sig:<on/off> <codec> (payload size)  
ATM <protocol> [int vpi/vci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>  
  sig:<on/off> <codec> (payload size)  
 Tele <int>:tx:<tot>/<v>/<fax>ms <codec> noise:<l> acom:<l> i/o:<l>/<l>  
dBm  
MODEMRELAY info:<rcvd>/<sent>/<resent> xid:<rcvd>/<sent>  
total:<rcvd>/<sent>/<drops>  
 Proxy <ip>:<audio udp>,<video udp>,<tcp0>,<tcp1>,<tcp2>,<tcp3> endpt: 
<type>/<manf>  
 bw:<req>/<act> codec:<audio>/<video>  
  tx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120  
pkts>/<t120 bytes>  
 rx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120  
pkts>/<t120 bytes>  
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
11D9 : 1102799(D1)hs.1 +1324 pid:2000(D2) Answer(D3) 2000(D4) active(D5)
 dur 1d19h(D6) tx:7875641(D7)/157512782(D8) rx:7875955(D9)/157519081(D10)
 Tele 2/0/0(D11):1: tx:157515460(D12)/157514630(D13)/0ms g729r8(D14)
 noise:-56(D15) acom:5(D16)  i/0:-40(D17)/-46(D18) dBm

11D9 : 1102966hs.1 +1157 pid:1000 Originate 1000 active
 dur 1d19h tx:7875388/157507741 rx:7875641/157512782
 IP 172.16.99.22(D19):19066(D20) rtt:6ms(D21) pl:157496940(D22)/4770ms(D23)
 lost:52(D24)/1(D25)/325(D26) delay:67(D27)/55(D28)/132ms(D29) g729r8

Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2

Oggetti MIB equivalenti 

D1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1
       = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

D2  —  DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000

D3  —  DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)

D4  —  DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000

D5  —  DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)

D6  —  DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks: 
       (1104123) 3:04:01.23
    —  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (16590203) 1 days, 
       22:05:02.03

D7  —  DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641

D8  —  DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782

D9  —  DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955

D10 —  DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081

D11 —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

D12 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.
       1102799.1 = Gauge32: 157515460 milliseconds

D13 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.
       1102799.1 = Gauge32: 157514630 milliseconds

D14 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.
       1102799.1 = INTEGER: ietfg729r8000(25)

D15 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.
       1102799.1 = INTEGER: -56 dBm

D16 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.
       1102799.1 =  INTEGER: 5 dB

D17 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.
       1102799.1 = INTEGER: -40 dBm

D18 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.
       1102799.1 = INTEGER: -46 dBm

D19 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.
       1102966.1 = IpAddress: 172.16.99.22

D20 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.
       1102966.1 = INTEGER: 19066

D21 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.
       1102966.1 = Gauge32: 6 milliseconds

D22 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.
       1102966.1 = Gauge32: 157496940 milliseconds

D23 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.
       1102966.1 = Gauge32: 1090 milliseconds
    —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.
       1102966.1 = Gauge32: 3680 milliseconds
    —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.
       1102966.1 = Gauge32: 0 milliseconds

D24 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.
       1102966.1 = Gauge32: 52 packets

D25 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.
       1102966.1 = Gauge32: 1 packets

D26 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.
       1102966.1 = Gauge32: 325 packets

D27 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.
       1102966.1 = Gauge32: 67

D28 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.
       1102966.1 = Gauge32: 55 milliseconds

D29 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.
       1102966.1 = Gauge32: 132 milliseconds

Nota: il valore GapFill del comando show call active voice brief viene ottenuto quando si aggiungono gli oggetti SNMP cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction e cvVoIPCallActiveGapFillWithInterpolation.

show voice dsp 

VoIPRouter#show voice dsp
 
DSP  DSP             DSPWARE CURR  BOOT                         PAK     TX/RX
TYPE NUM CH CODEC    VERSION STATE STATE   RST AI VOICEPORT TS ABORT  PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============
C549 009 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     05     0         0/36
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     06     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     07     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     08     0          0/0
C549 010 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     09     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     10     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     11     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     12     0          0/0
C549 011 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     13     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     14     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     15     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     16     0          0/0
C549 012 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     17     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     18     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     19     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     20     0          0/0
C549 013 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     21     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     22     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     23     0         0/12
         04 g729r8    4.1.31 busy  idle         0 1/0:0     24     0    176/56702
C549 014 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     01     0         0/27
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     02     0         0/12
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     03     0         0/12
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     04     0         0/12

Di seguito sono riportati alcuni utili oggetti MIB che forniscono informazioni sulla chiamata attiva nell'output di esempio del comando show voice dsp:

CISCO-DSP-MGMT-MIB::cdspCardIndex.7 = INTEGER: 2
OLD-CISCO-CHASSIS-MIB::cardType.2 = INTEGER: hdv(516)
OLD-CISCO-CHASSIS-MIB::cardDescr.2 = STRING: "High Density Voice"
ENTITY-MIB::entPhysicalDescr.7 = STRING: High Density Voice
ENTITY-MIB::entPhysicalDescr.22 = STRING: DSP (C549)
CISCO-DSP-MGMT-MIB::cdspCardState.7 = INTEGER: normal(1)
CISCO-DSP-MGMT-MIB::cdspCardMaxChanPerDSP.7 = Gauge32: 4 channels
CISCO-DSP-MGMT-MIB::cdspTotalChannels.22 = Gauge32: 4 channels
CISCO-DSP-MGMT-MIB::cdspActiveChannels.21 = Gauge32: 1 channels

Nota: il MIB che contiene le informazioni per show voice dsp è CISCO-DSP-MGMT-MIB. Tuttavia, a causa dell'ID bug Cisco CSCeb62542 per la scheda NM-2V, i DSP su NM-2V non vengono mostrati in ENTITY-MIB. Poiché cdspCardStatusTable dipende da entPhysicalIndex di ENTITY-MIB, cdspCardStatusTable non viene popolato per la scheda NM-2V.

Appendice

Questo output mostra lo snmpwalk completo di ciscoVoiceAnalogIfMIB di CISCO-VOICE-ANALOG-IF-MIB al momento dei comandi di verifica VoIP mostrati in questo documento:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-ANALOG-IF-MIB:ciscoVoiceAnalogIfMIB
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.37 = INTEGER: ohms600Real(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.38 = INTEGER: ohms600Real(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.37 = INTEGER: voice(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.38 = INTEGER: none(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.37 = INTEGER: none(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.38 = INTEGER: none(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.37 = Counter32: 0
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.38 = Counter32: 0
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.38 = INTEGER: fxsLoopStart(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.37 = INTEGER: ringFrequency25(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.38 = INTEGER: ringFrequency25(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.38 = INTEGER: onHook(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.37 = 
INTEGER: 100 milliseconds
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.38 = 
INTEGER: 100 milliseconds
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.37 = 
INTEGER: 100 milliseconds
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.38 = 
INTEGER: 100 milliseconds

Questo output mostra lo snmpwalk completo di ciscoVoiceInterfaceMIB di CISCO-VOICE-IF-MIB al momento dei comandi di verifica VoIP mostrati in questo documento: 

snmpwalk -c public 172.16.100.20 CISCO-VOICE-IF-MIB:ciscoVoiceInterfaceMIB
CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.37 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.38 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.37 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.38 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.37 = INTEGER: -38 dBm
CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.38 = INTEGER: -38 dBm
CISCO-VOICE-IF-MIB::cvIfCfgInGain.37 = INTEGER: 0 dB
CISCO-VOICE-IF-MIB::cvIfCfgInGain.38 = INTEGER: 0 dB
CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.37 = INTEGER: 3 dB
CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.38 = INTEGER: 3 dB
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.38 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.37 = INTEGER: 4
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.38 = INTEGER: 4
CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.37 = INTEGER: normal(1)
CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.38 = INTEGER: normal(1)
CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.37 = STRING: 
CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.38 = STRING: 
CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.37 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.38 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.37 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.38 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.37 = STRING: "US"
CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.38 = STRING: "US"
CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.37 = INTEGER: 1
CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.38 = INTEGER: 1
CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.37 = INTEGER: 1
CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.38 = INTEGER: 1

Questo output mostra lo snmpwalk completo di ciscoVoiceDialControlMIB di CISCO-VOICE-DIAL-CONTROL-MIB al momento dei comandi di verifica VoIP mostrati in questo documento: 

snmpwalk -c public 172.16.100.20 CISCO-VOICE-DIAL-CONTROL-MIB:ciscoVoiceDialControlMIB
CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralPoorQoVNotificationEnable.0 = INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.1000 = INTEGER: 91
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.1000 = INTEGER: voip(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.1000 = INTEGER: active(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.2000 = INTEGER: active(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.1000 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.2000 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgSessionTarget.90 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDIDCallEnable.90 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgCasGroup.90 = INTEGER: -1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgRegisterE164.90 = INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgForwardDigits.90 = INTEGER: -1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEntry.7.90 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionProtocol.91 = INTEGER: cisco(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDesiredQoS.91 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMinAcceptableQoS.91 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 = 
STRING: ipv4:172.16.99.22
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderRate.91 = 
INTEGER: g729IETFr8000(16)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxRate.91 = INTEGER: voiceRate(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgVADEnable.91 = INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgExpectFactor.91 = 
INTEGER: 0 equipment impairment factor (eif)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIcpif.91 = 
INTEGER: 20 equipment impairment factor (eif)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable.91 = 
INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgUDPChecksumEnable.91 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIPPrecedence.91 = INTEGER: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgTechPrefix.91 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDigitRelay.91 = Hex-STRING: 00 
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderBytes.91 = INTEGER: 20 bytes
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxBytes.91 = INTEGER: 20 bytes
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgInBandSignaling.91 = INTEGER: cas(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgEntry.23.91 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.90 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.91 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.90 = 
INTEGER: -1 connections
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.91 = 
INTEGER: -1 connections
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.90 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.91 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.91 = INTEGER: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.90 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.91 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1 = 
Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.1102799.1 = 
Gauge32: 157515460 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.1102799.1 = 
Gauge32: 157514630 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveFaxTxDuration.1102799.1 = 
Gauge32: 0 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.1102799.1 = 
INTEGER: ietfg729r8000(25)
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.1102799.1 = INTEGER: -56 dBm
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.1102799.1 = INTEGER: 5 dB
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.1102799.1 = 
INTEGER: -46 dBm
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.1102799.1 = 
INTEGER: -40 dBm
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveERLLevel.1102799.1 = INTEGER: 5 dB
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveSessionTarget.1102799.1 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveImgPageCount.1102799.1 = Gauge32: 0 pages
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.13.1102799.1 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.14.1102799.1 = INTEGER: 2
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.15.1102799.1 = INTEGER: 19971
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.17.1102799.1 = INTEGER: 5
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveConnectionId.1102966.1 = 
Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.1102966.1 = 
IpAddress: 172.16.99.22
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.1102966.1 = 
INTEGER: 19066
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.1102966.1 = 
Gauge32: 6 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSelectedQoS.1102966.1 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionProtocol.1102966.1 = 
INTEGER: cisco(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionTarget.1102966.1 = 
STRING: ipv4:172.16.99.22
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.1102966.1 = 
Gauge32: 157496940 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.1102966.1 = 
Gauge32: 1090 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.1102966.1 = 
Gauge32: 3680 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.1102966.1 = 
Gauge32: 0 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithRedundancy.1102966.1 = 
Gauge32: 0 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.1102966.1 = 
Gauge32: 132 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.1102966.1 = 
Gauge32: 55 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.1102966.1 = 
Gauge32: 67
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveVADEnable.1102966.1 = 
INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveCoderTypeRate.1102966.1 = 
INTEGER: ietfg729r8000(25)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.1102966.1 = 
Gauge32: 52 packets
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.1102966.1 = 
Gauge32: 1 packets
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.1102966.1 = 
Gauge32: 325 packets
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.21.1102966.1 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.22.1102966.1 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.23.1102966.1 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.24.1102966.1 = 
STRING: "172.16.99.22"
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.25.1102966.1 = INTEGER: 1720
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.26.1102966.1 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.27.1102966.1 = 
STRING: "172.16.99.22"
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.28.1102966.1 = INTEGER: 19066

Questo output mostra lo snmpwalk completo di ciscoVoiceCommonDialControlMIB di CISCO-VOICE-DIAL-CONTROL-MIB al momento dei comandi di verifica VoIP mostrati in questo documento: 

snmpwalk -c public 172.16.100.20 CISCO-VOICE-COMMON-DIAL-CONTROL-MIB:
ciscoVoiceCommonDialControlMIB
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveConnectionId.
1102966.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.
1102966.1 = INTEGER: true(1)
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.
1102966.1 = INTEGER: ietfg729r8000(25)
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCodecBytes.
1102966.1 = INTEGER: 20
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveInBandSignaling.
1102966.1 = INTEGER: cas(1)
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.6.
1102966.1 = ""
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.7.
1102966.1 = INTEGER: 2

Questo output mostra lo snmpwalk completo di dialControlMib di DIAL-CONTROL-MIB al momento dei comandi di verifica VoIP mostrati in questo documento: 

snmpwalk -c public 172.16.100.20 DIAL-CONTROL-MIB:dialControlMib
DIAL-CONTROL-MIB::dialCtlAcceptMode.0 = INTEGER: acceptAll(2)
DIAL-CONTROL-MIB::dialCtlTrapEnable.0 = INTEGER: enabled(1)
DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.1000.91 = INTEGER: voiceOverIp(104)
DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.2000.90 = INTEGER: voiceFXS(102)
DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37
DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.1000.91 = STRING: 1000
DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000
DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.1000.91 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.2000.90 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.1000.91 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.2000.90 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.1000.91 = INTEGER: speech(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.2000.90 = INTEGER: speech(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.1000.91 = INTEGER: both(3)
DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.2000.90 = INTEGER: both(3)
DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.1000.91 = INTEGER: disabled(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.2000.90 = INTEGER: disabled(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.1000.91 = INTEGER: active(1)
DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.2000.90 = INTEGER: active(1)
DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.1000.91 = Gauge32: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.2000.90 = Gauge32: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.1000.91 = ""
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.2000.90 = ""
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.1000.91 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.2000.90 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.1000.91 = Timeticks: 
(1102966) 3:03:49.66
DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.2000.90 = Timeticks: 
(1102799) 3:03:47.99
DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000
DIAL-CONTROL-MIB::callActivePeerAddress.1102966.1 = STRING: 1000
DIAL-CONTROL-MIB::callActivePeerSubAddress.1102799.1 = STRING: 
DIAL-CONTROL-MIB::callActivePeerSubAddress.1102966.1 = STRING: 
DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000
DIAL-CONTROL-MIB::callActivePeerId.1102966.1 = INTEGER: 1000
DIAL-CONTROL-MIB::callActivePeerIfIndex.1102799.1 = INTEGER: 90
DIAL-CONTROL-MIB::callActivePeerIfIndex.1102966.1 = INTEGER: 91
DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102799.1 = INTEGER: 37
DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102966.1 = INTEGER: 0
DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks: 
(1104123) 3:04:01.23
DIAL-CONTROL-MIB::callActiveConnectTime.1102966.1 = Timeticks: 
(1104123) 3:04:01.23
DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)
DIAL-CONTROL-MIB::callActiveCallState.1102966.1 = INTEGER: active(4)
DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)
DIAL-CONTROL-MIB::callActiveCallOrigin.1102966.1 = INTEGER: originate(1)
DIAL-CONTROL-MIB::callActiveChargedUnits.1102799.1 = Gauge32: 0
DIAL-CONTROL-MIB::callActiveChargedUnits.1102966.1 = Gauge32: 0
DIAL-CONTROL-MIB::callActiveInfoType.1102799.1 = INTEGER: speech(2)
DIAL-CONTROL-MIB::callActiveInfoType.1102966.1 = INTEGER: speech(2)
DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641
DIAL-CONTROL-MIB::callActiveTransmitPackets.1102966.1 = Gauge32: 7875388
DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782
DIAL-CONTROL-MIB::callActiveTransmitBytes.1102966.1 = Gauge32: 157507741
DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955
DIAL-CONTROL-MIB::callActiveReceivePackets.1102966.1 = Gauge32: 7875641
DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081
DIAL-CONTROL-MIB::callActiveReceiveBytes.1102966.1 = Gauge32: 157512782
DIAL-CONTROL-MIB::callHistoryTableMaxLength.0 = INTEGER: 50
DIAL-CONTROL-MIB::callHistoryRetainTimer.0 = INTEGER: 15 minutes

Informazioni correlate

Questo documento ti è stato utile?

FeedbackFeedback

Contattaci