Configurazione di MS Callback tra un router e un PC Windows

Opzioni per il download

  • PDF     (220.9 KB)
    Visualizza con Adobe Reader su diversi dispositivi
  • ePub     (137.8 KB)
    Visualizza in diverse app su iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (170.8 KB)
    Visualizza su dispositivo Kindle o tramite app Kindle su più dispositivi
Aggiornato:29 gennaio 2008
ID documento:9554

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

Introduzione

L'implementazione Microsoft del callback non è conforme alla RFC 1570 leavingcisco.com. Tuttavia, a causa dell'elevata quota di mercato del client di connessione remota Microsoft, Cisco ha implementato il protocollo di controllo Microsoft Callback (MSCB) nel software Cisco IOS® versione 11.3(2)T e successive.

Prerequisiti

Requisiti

Prima di provare la configurazione, verificare che siano soddisfatti i seguenti requisiti:

  • Configurare il server di accesso alla rete (NAS) per accettare le chiamate analogiche dal client. La richiamata è una funzionalità aggiuntiva della connessione remota del modem. Verificare quindi che l'aspetto funzioni correttamente. Ciò consente di risolvere i problemi.

  • Il circuito T1/E1 deve essere in grado di effettuare chiamate in uscita. Per verificare questa condizione, contattare la società telefonica (Telco).

Componenti usati

Per questo documento, è stato usato il software Cisco IOS versione 11.3(2)T e successive.

Questo scenario è stato testato su un PC con connessione remota Windows.

Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è operativa, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.

Convenzioni

Per ulteriori informazioni sulle convenzioni usate, consultare il documento Cisco sulle convenzioni nei suggerimenti tecnici.

Nozioni di base

Il callback viene eseguito nell'ordine seguente:

  1. Un utente PC (client) si connette al server di accesso Cisco.

  2. Il processo di callback viene negoziato nella fase LCP (Link Control Protocol) del protocollo PPP (Point-to-Point Protocol).

  3. Viene eseguita l'autenticazione PPP.

  4. Il software Cisco IOS convalida le regole di richiamata per questo utente o linea e disconnette il chiamante per la richiamata.

  5. Il server di accesso Cisco chiama il client.

Esistono quattro tipi di MSCB:

  1. Nessuna richiamata.

  2. Numero di richiamata specificato dall'utente.

  3. Numero di richiamata specificato dal server (preconfigurato).

  4. Elenco di numeri di richiamata preconfigurati.

La configurazione predefinita è nessuna richiamata (opzione 1). Le opzioni 2 o 3 possono essere configurate:

  • Localmente (se non si usa alcun server AAA).

  • Nel profilo utente TACACS+ o RADIUS (se si usa AAA).

Se è configurata l'opzione 2, all'utente viene richiesto di immettere il numero di richiamata. Se l'opzione 3 è configurata, il prompt offre una sola scelta, ovvero il numero definito dall'amministratore.

Cisco implementa solo la funzionalità server di callback di MSCB e non la funzionalità client di callback. Ciò significa che un router Cisco può essere utilizzato solo come server MSCB e non come client MSCB. Inoltre, l'implementazione Cisco di MSCB richiede l'autenticazione sul client.

Configurazione

In questa sezione vengono presentate le informazioni necessarie per configurare le funzionalità descritte più avanti nel documento.

Riepilogo della configurazione

Per abilitare MSCB, è necessario abilitare il comando ppp callback accept nell'interfaccia di ricezione (ad esempio, group-async). Inoltre, poiché è necessaria l'autenticazione, è necessario abilitare l'autenticazione PAP (Password Authentication Protocol) o CHAP (Challenge Handshake Authentication Protocol): 

ppp authentication chap pap

Vengono creati automaticamente due script di chat. Questi sono gli script di chat offhook e callback:

chat-script offhook "" "ATH1" OK
chat-script callback ABORT ERROR ABORT BUSY "" 
"ATZ" OK "ATDT \T" TIMEOUT60 CONNECT \c

Gli script di chat vengono applicati automaticamente anche alle righe in uso:

line 1 24
  script modem-off-hook offhook
  script callback callback

Un utente deve essere autorizzato per essere richiamato. È possibile configurarlo localmente su NAS o sul server AAA esterno (RADIUS o TACACS+), in base alla posizione in cui sono archiviate le informazioni relative a nome utente e password.

Questa è una configurazione locale per un utente richiamato al numero 5551212: 

username callmeback callback-dialstring 5551212 password cisco

Questa configurazione locale è applicabile agli utenti autorizzati a specificare il proprio numero di richiamata:

username callmeback callback-dialstring "" password cisco

Esempio di rete

Nel documento viene usata questa impostazione di rete:

async_ppp.gif

Configurazioni

Nel documento viene usata questa configurazione:

  • isdn2-2 (AS5200 Router)

isdn2-2 (AS5200 Router) 
Current configuration:
!
version 11.3
service timestamps debug datetime msec
service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname isdn2-2
!
aaa new-model
aaa authentication login default none
aaa authentication login use-local local
aaa authentication ppp default local
aaa authorization network local

!--- Runs authorization for network-related service requests (Example: PPP). !--- For an AAA server implementation, replace "local" with TACACS+ or RADIUS in !--- these statements.

enable secret 5 <deleted>
!
username callmeback callback-dialstring "" password 7 <deleted>

!--- This is for mobile users. The client specifies the callback number. !--- If a RADIUS server is used, this information can be offloaded to the server.

ip domain-name cisco.com
isdn switch-type primary-5ess
chat-script offhook "" "ATH1" OK
chat-script callback ABORT ERROR ABORT BUSY "" "ATZ" OK "ATDT \T" TIMEOUT 60 CONNECT \c

!--- The chat script "callback" is used for the callback connection.

clock timezone PST -8
clock summer-time PDT recurring
!
!
controller T1 0

!--- Active T1 Primary Rate Interface (PRI).

 framing esf
 clock source line secondary
 linecode b8zs
 pri-group timeslots 1-24
!
controller T1 1
 shutdown 
!
interface Ethernet0
 ip address 172.16.25.52 255.255.255.240
!
interface Serial0
 no ip address
 shutdown
!
interface Serial1
 no ip address
 shutdown
!
interface Serial0:23

!--- D-channel for T1 0.

 ip unnumbered Ethernet0
 encapsulation ppp
 dialer-group 1
 isdn incoming-voice modem

!--- Allows incoming ISDN voice calls to be switched to the onboard modems.

 peer default ip address pool default
!
interface Group-Async1
  ip unnumbered Ethernet0
  ip tcp header-compression passive
  encapsulation ppp
  async mode interactive
  peer default ip address pool default
  no cdp enable
  ppp max-bad-auth 3
  ppp callback accept

!--- Allows the group-async to accept a callback request to a remote host.

  ppp authentication chap

!--- CHAP, PAP, or both must be enabled for callback.

   group-range 1 12
!
router eigrp 202
  network 172.16.0.0
  distance 90 172.16.25.49 0.0.0.0
  no auto-summary
!
ip local pool default 172.16.25.59 172.16.25.62

!--- Default IP address pool for dial-in clients.

ip default-gateway 172.16.25.49

ip classless
dialer-list 1 protocol ip permit
!
line con 0
line 1 6
  autoselect during-login
  autoselect ppp
  script modem-off-hook offhook
  script callback callback

!--- Specifies a chat script to issue AT commands to the modem during a callback attempt. !--- The chat-scripts "offhook" and "callback" were configured earlier.

  login authentication use-local
  modem InOut
  transport input all
line 7 12

!--- These modems are busied out and not used.

  autoselect during-login
  autoselect ppp
  login authentication use-local
  modem InOut
  modem busyout
  transport input all
line aux 0
  exec-timeout 0 0
  line vty 0 4
  password 7 <deleted>
!
end

Configurazione client Windows

Configurazione client Windows 95 e 98

Per i PC Windows 95 e 98, non esiste una configurazione client-side speciale per la richiamata. Il server di accesso gestisce le funzionalità di richiamata della connessione. In Windows 95 o 98 viene visualizzato un messaggio che indica che è in corso una richiamata.

Configurazione client Windows NT e 2000

Configurare queste piattaforme per richiedere la richiamata. Completare la procedura seguente per configurarli:

  1. Scegliere Start > Programmi > Accessori > Comunicazioni > Rete e connessioni remote.

  2. Scegliere Avanzate > Preferenze connessione remota dal menu.

  3. Fare clic sulla scheda Richiamata per accedere al menu delle funzioni di richiamata, come mostrato nella figura 1.

  4. Configurare le opzioni di richiamata in base alle esigenze:

    • Per non utilizzare la funzione di richiamata, fare clic sul pulsante Nessuna richiamata.

    • Per visualizzare la richiesta di conferma quando un server offre la richiamata, fare clic sul pulsante Chiedi conferma durante la composizione quando il server offre.

    • Per accettare automaticamente le offerte di richiamata, fare clic sul pulsante Richiama sempre al numero o ai numeri seguenti e selezionare il dispositivo da utilizzare dall'elenco.

    • Per modificare il numero di telefono richiamata, selezionare il dispositivo e fare clic sul pulsante Modifica. Immettere il numero nel campo Phone Number (Numero di telefono) come mostrato nella Figura 1, quindi fare clic su OK nella finestra di dialogo Call Me Back At (Richiama al numero).

  5. Fare clic sul campo Numero di telefono e immettere il numero nella finestra di dialogo Richiama (come mostrato nella figura 1). Al termine, fare clic su OK.

  6. Al termine, fare clic su OK nella finestra di dialogo Preferenze connessione remota.

    Figura 1 - Accesso alle funzionalità di richiamata

    async_ppp2.gif

    async_ppp3.gif

Verifica

Le informazioni contenute in questa sezione permettono di verificare che la configurazione funzioni correttamente.

Alcuni comandi show sono supportati dallo strumento Output Interpreter (solo utenti registrati); lo strumento permette di visualizzare un'analisi dell'output del comando show.

  • show isdn active: visualizza informazioni sulle chiamate ISDN in entrata e in uscita correnti. Utilizzare questo comando per verificare se la richiamata è stata completata correttamente. Se la richiamata ha esito positivo, il comando show isdn active visualizza la chiamata come in uscita sul server di richiamata.

  • show users: visualizza le informazioni sulle linee attive sul router. È possibile usare il comando show caller anche se è supportato dalla versione in uso del software Cisco IOS.

  • show dialer: visualizza le informazioni di diagnostica generali per le interfacce configurate per il routing DDR (Dial-on-Demand Routing).

Risoluzione dei problemi

Le informazioni contenute in questa sezione permettono di risolvere i problemi relativi alla configurazione.

Comandi per la risoluzione dei problemi

Nota: prima di usare i comandi di debug, consultare le informazioni importanti sui comandi di debug.

Per ulteriori informazioni sui comandi di debug, consultare la guida di riferimento dei comandi di debug di Cisco IOS versione 12.0.

  • debug aaa authentication: visualizza le informazioni sull'autenticazione AAA.

  • debug aaa authorization: visualizza le informazioni sull'autorizzazione AAA.

  • debug callback: visualizza gli eventi di callback quando il router utilizza un modem e uno script di chat per richiamare una linea terminale.

  • debug modem: consente di osservare l'attività della linea del modem su un server di accesso.

  • debug ppp [ packet | negoziazione | errore | authentication ]— visualizza informazioni sul traffico e sugli scambi in una rete interna che implementa il protocollo PPP.

    • packet: visualizza i pacchetti PPP che vengono inviati e ricevuti. (Questo comando visualizza i dump di pacchetti di basso livello.)

    • negoziazione: visualizza i pacchetti PPP trasmessi durante l'avvio di PPP, quando le opzioni PPP vengono negoziate.

    • error: visualizza gli errori di protocollo e le statistiche degli errori associate alla negoziazione e al funzionamento della connessione PPP.

    • authentication: visualizza i messaggi del protocollo di autenticazione, che includono gli scambi CHAP e PAP.

  • debug chat: visualizza l'handshake che si verifica tra il server di accesso e il relativo modem interno mentre il modem riceve istruzioni di connessione remota. Uno script di chat è un insieme di coppie di stringhe di invio previsto che definiscono l'handshake tra dispositivi DTE (Data Terminal Equipment) e DCE (Data Communications Equipment).

  • debug isdn q931: visualizza i messaggi e i debug di configurazione e disinstallazione delle chiamate ISDN Q.931 (canale D). In questo scenario, la chiamata modem viene eseguita come servizio di supporto vocale sulla rete PSTN (Public Switched Telephone Network).

  • debug modem csm: consente di risolvere i problemi relativi al modulo CSM (Call Switching Module) sui router con modem digitali interni. Con questo comando è possibile tracciare la sequenza completa delle chiamate in entrata e in uscita. 

isdn2-2#show debug
   General OS:
   Modem control/process activation debugging is on
   AAA Authentication debugging is on
   AAA Authorization debugging is on
   PPP:
   PPP protocol negotiation debugging is on
   ISDN:
   ISDN Q931 packets debugging is on
   Chat Scripts:
   Chat scripts activity debugging is on
   Modem Management:
   Modem Management Call Switching Module debugging is on
   isdn2-2#

 !--- This is the initial call from the client.

   *Mar 1 01:24:48.643: ISDN Se0:23: RX <- SETUP pd = 8 callref = 0x36
   *Mar 1 01:24:48.647: Bearer Capability i = 0x9090A2
   *Mar 1 01:24:48.651: Channel ID i = 0xA98393
   *Mar 1 01:24:48.651: Called Party Number i = 0xC1, '4084327528'
   *Mar 1 01:24:48.663: ISDN Se0:23: Incoming call id = 0xA
   *Mar 1 01:24:48.671: EVENT_FROM_ISDN::dchan_idb=0x7F8EE0, call_id=0xA, ces=0x1
   bchan=0x12, event=0x1, cause=0x0
   *Mar 1 01:24:48.671: VDEV_ALLOCATE: slot 0 and port 3 is allocated.
   *Mar 1 01:24:48.675: EVENT_FROM_ISDN:(000A): DEV_INCALL at slot 0 and port  3
   *Mar 1 01:24:48.675: CSM_PROC_IDLE: CSM_EVENT_ISDN_CALL at slot 0, port 3
   *Mar 1 01:24:48.679: Fast Ringing On at modem slot 0, port 3
   *Mar 1 01:24:48.699: ISDN Se0:23: TX -> CALL_PROC pd = 8 callref = 0x8036
   *Mar 1 01:24:48.703: Channel ID i = 0xA98393
   *Mar 1 01:24:48.735: ISDN Se0:23: TX -> ALERTING pd = 8 callref = 0x8036
   *Mar 1 01:24:49.699: Fast Ringing Off at modem slot 0, port 3
   *Mar 1 01:24:49.699: CSM_PROC_IC1_RING: CSM_EVENT_MODEM_OFFHOOK at slot 0,
   port 3
   *Mar 1 01:24:49.711: ISDN Se0:23: TX -> CONNECT pd = 8 callref = 0x8036
   *Mar 1 01:24:49.783: ISDN Se0:23: RX <- CONNECT_ACK pd = 8 callref = 0x36
   *Mar 1 01:24:49.799: EVENT_FROM_ISDN::dchan_idb=0x7F8EE0, call_id=0xA, ces=0x1
   bchan=0x12, event=0x4, cause=0x0
   *Mar 1 01:24:49.799: EVENT_FROM_ISDN:(000A): DEV_CONNECTED at slot 0 and
   port 3
   *Mar 1 01:24:49.803: CSM_PROC_IC4_WAIT_FOR_CARRIER:CSM_EVENT_ISDN_CONNECTED at
    slot 0, port 3

 !--- Modem has established carrier.

   *Mar 1 01:25:11.123: TTY4: DSR came up
   *Mar 1 01:25:11.127: tty4: Modem: IDLE->READY
   *Mar 1 01:25:11.131: TTY4: EXEC creation
   *Mar 1 01:25:11.135: AAA/AUTHEN: create_user (0x7B009C) user='' ruser=''
   port='tty4' rem_addr='async/4084327528' authen_type=ASCII service=LOGIN priv=1
   *Mar 1 01:25:11.139: AAA/AUTHEN/START (3134998138): port='tty4'
   list='use-local' action=LOGIN service=LOGIN
   *Mar 1 01:25:11.143: AAA/AUTHEN/START (3134998138): found list use-local
   *Mar 1 01:25:11.143: AAA/AUTHEN/START (3134998138): Method=LOCAL
   
 !--- Local AAA.

   *Mar 1 01:25:11.147: AAA/AUTHEN (3134998138): status = GETUSER
   *Mar 1 01:25:13.951: TTY4: Autoselect(2) sample 7E
   *Mar 1 01:25:13.955: TTY4: Autoselect(2) sample 7EFF
   *Mar 1 01:25:13.959: TTY4: Autoselect(2) sample 7EFF7D
   *Mar 1 01:25:13.959: TTY4: Autoselect(2) sample 7EFF7D23
   *Mar 1 01:25:13.963: TTY4 Autoselect cmd: ppp negotiate
   *Mar 1 01:25:13.967: AAA/AUTHEN/ABORT: (3134998138) because Autoselected.
   *Mar 1 01:25:13.967: AAA/AUTHEN: free_user (0x7B009C) user='' ruser=''
   port='tty4' rem_addr='async/4084327528' authen_type=ASCII service=LOGIN priv=1
   *Mar 1 01:25:13.975: TTY4: EXEC creation

 !--- PPP has been autoselected and begins negotiation.

   %LINK-3-UPDOWN: Interface Async4, changed state to up
   *Mar 1 01:25:16.611: As4 PPP: Treating connection as a dedicated line
   *Mar 1 01:25:16.611: As4 PPP: Phase is ESTABLISHING, Active Open

 !--- LCP negotiation begins.

   *Mar 1 01:25:16.615: As4 LCP: O CONFREQ [Closed] id 3 len 25
   *Mar 1 01:25:16.619: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:25:16.623: As4 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 1 01:25:16.623: As4 LCP: MagicNumber 0x608D04A3 (0x0506608D04A3)
   *Mar 1 01:25:16.627: As4 LCP: PFC (0x0702)
   *Mar 1 01:25:16.627: As4 LCP: ACFC (0x0802)
   *Mar 1 01:25:16.751: As4 LCP: I CONFACK [REQsent] id 3 len 25
   *Mar 1 01:25:16.755: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:25:16.755: As4 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 1 01:25:16.759: As4 LCP: MagicNumber 0x608D04A3 (0x0506608D04A3)
   *Mar 1 01:25:16.763: As4 LCP: PFC (0x0702)
   *Mar 1 01:25:16.763: As4 LCP: ACFC (0x0802)
   *Mar 1 01:25:17.003: As4 LCP: I CONFREQ [ACKrcvd] id 3 len 23

 !--- Incoming CONFREQ.
 
   *Mar 1 01:25:17.003: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:25:17.007: As4 LCP: MagicNumber 0x004A4A09 (0x0506004A4A09)
   *Mar 1 01:25:17.007: As4 LCP: PFC (0x0702)
   *Mar 1 01:25:17.011: As4 LCP: ACFC (0x0802)
   *Mar 1 01:25:17.011: As4 LCP: Callback 6 (0x0D0306)

 !--- Peer requests MS Callback (Option 6). !--- A PPP callback request uses Option 0.

   *Mar 1 01:25:17.015: As4 LCP: O CONFACK [ACKrcvd] id 3 len 23
   *Mar 1 01:25:17.015: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:25:17.019: As4 LCP: MagicNumber 0x004A4A09 (0x0506004A4A09)
   *Mar 1 01:25:17.023: As4 LCP: PFC (0x0702)
   *Mar 1 01:25:17.023: As4 LCP: ACFC (0x0802)
   *Mar 1 01:25:17.023: As4 LCP: Callback 6 (0x0D0306)

 !--- NAS CONFACKS all LCP parameters. !--- If the NAS refuses Callback (completely or just MS Callback), LCP may fail.

   *Mar 1 01:25:17.027: As4 LCP: State is Open
  
 !--- Authentication begins.

   *Mar 1 01:25:20.095: As4 PPP: Phase is AUTHENTICATING, by this end
   *Mar 1 01:25:20.099: As4 CHAP: O CHALLENGE id 4 len 28 from "isdn2-2"
   *Mar 1 01:25:20.187: As4 CHAP: I RESPONSE id 4 len 26 from "callmeback"
   *Mar 1 01:25:20.191: AAA/AUTHEN: create_user (0x7ADEAC) user='callmeback'
   ruser='' port='Async4' rem_addr='async/4084327528' authen_type=CHAP
   service=PPP priv=1
   *Mar 1 01:25:20.195: AAA/AUTHEN/START (44582883): port='Async4' list=''
   action=LOGIN service=PPP
   *Mar 1 01:25:20.199: AAA/AUTHEN/START (44582883): using "default" list
   *Mar 1 01:25:20.199: AAA/AUTHEN/START (44582883): Method=LOCAL
   
 !--- Authentication passes.

  *Mar 1 01:25:20.203: AAA/AUTHEN (44582883): status = PASS

 !--- Check authorization for LCP. !--- With local AAA, this should pass. !--- For server-based AAA, this must be explicitly configured on the server.

   *Mar 1 01:25:20.207: AAA/AUTHOR/LCP As4: Authorize LCP
   *Mar 1 01:25:20.207: AAA/AUTHOR/LCP: Async4: (3405067782): user='callmeback'
   *Mar 1 01:25:20.211: AAA/AUTHOR/LCP: Async4: (3405067782): send AV service=ppp
   *Mar 1 01:25:20.211: AAA/AUTHOR/LCP: Async4: (3405067782): send AV
   protocol=lcp
   *Mar 1 01:25:20.215: AAA/AUTHOR/LCP: Async4 (3405067782): Method=LOCAL
   *Mar 1 01:25:20.219: AAA/AUTHOR (3405067782): Post authorization status =
   PASS_ADD
   *Mar 1 01:25:20.223: AAA/AUTHOR/LCP As4: Processing AV service=ppp
   *Mar 1 01:25:20.223: AAA/AUTHOR/LCP As4: Processing AV protocol=lcp
   *Mar 1 01:25:20.227: AAA/AUTHOR/LCP As4: Processing AV service=ppp
   *Mar 1 01:25:20.227: AAA/AUTHOR/LCP As4: Processing AV protocol=lcp

 !--- Callback-dialstring is null, so user is allowed to specify !--- their own callback number.

  *Mar 1 01:25:20.227: AAA/AUTHOR/LCP As4: Processing AV callback-dialstring=

 !--- Authentication ACK is returned to client.

  *Mar 1 01:25:20.235: As4 CHAP: O SUCCESS id 4 len 4

 !--- Callback negotiation proceeds. Because callback-dialstring !--- is null, MCB debug says "Callback Number - Client ANY".

  *Mar 1 01:25:20.239: As4 MCB: User callmeback Callback Number - Client ANY

 !--- The callback number of the client is requested. Client receives a dialog !--- box that prompts the user to type in the callback number. !--- Request is sent every two seconds. If the user is slow to type a response, !--- the call remains in this phase for a long time.
   
   *Mar 1 01:25:20.243: Async4 PPP: O MCB Request(1) id 20 len 9
   *Mar 1 01:25:20.243: Async4 MCB: O 1 14 0 9 2 5 0 1 0 
   *Mar 1 01:25:20.247: As4 MCB: O Request Id 20 Callback Type Client-Num delay  0
   %LINEPROTO-5-UPDOWN: Line protocol on Interface Async4, changed state to up
   *Mar 1 01:25:22.459: As4 MCB: Timeout in state WAIT_RESPONSE
   *Mar 1 01:25:22.463: Async4 PPP: O MCB Request(1) id 21 len 9
   *Mar 1 01:25:22.463: Async4 MCB: O 1 15 0 9 2 5 0 1 0 
   *Mar 1 01:25:22.467: As4 MCB: O Request Id 21 Callback Type Client-Num delay  0
   *Mar 1 01:25:24.499: As4 MCB: Timeout in state WAIT_RESPONSE
   *Mar 1 01:25:24.503: Async4 PPP: O MCB Request(1) id 22 len 9
   *Mar 1 01:25:24.503: Async4 MCB: O 1 16 0 9 2 5 0 1 0 
   *Mar 1 01:25:24.507: As4 MCB: O Request Id 22 Callback Type Client-Num delay  0
   *Mar 1 01:25:26.543: As4 MCB: Timeout in state WAIT_RESPONSE
   *Mar 1 01:25:26.547: Async4 PPP: O MCB Request(1) id 23 len 9
   *Mar 1 01:25:26.547: Async4 MCB: O 1 17 0 9 2 5 0 1 0 
   *Mar 1 01:25:26.551: As4 MCB: O Request Id 23 Callback Type Client-Num delay  0
   *Mar 1 01:25:28.583: As4 MCB: Timeout in state WAIT_RESPONSE
   *Mar 1 01:25:28.587: Async4 PPP: O MCB Request(1) id 24 len 9
   *Mar 1 01:25:28.587: Async4 MCB: O 1 18 0 9 2 5 0 1 0 
   *Mar 1 01:25:28.591: As4 MCB: O Request Id 24 Callback Type Client-Num delay  0

 !--- Client returned the callback number. Notice that the response !--- is for the initial request id 20.

   *Mar 1 01:25:29.763: Async4 PPP: I MCB Response(2) id 20 len 17
   *Mar 1 01:25:29.767: Async4 MCB: I 2 14 0 11 2 D F 1 35 32 37 2D 39 36 35 31 0 
   *Mar 1 01:25:29.767: As4 MCB: Received response

 !--- Response is ignored because the id is 20. There have !--- been a few timeouts and id 24 (the last one sent) is expected.

   *Mar 1 01:25:29.771: As4 MCB: Resp ignored. ID Expected 24, got id 20
   *Mar 1 01:25:30.623: As4 MCB: Timeout in state WAIT_RESPONSE

 !--- Send out new request (id 25).

   *Mar 1 01:25:30.627: Async4 PPP: O MCB Request(1) id 25 len 9
   *Mar 1 01:25:30.627: Async4 MCB: O 1 19 0 9 2 5 0 1 0 
   *Mar 1 01:25:30.631: As4 MCB: O Request Id 25 Callback Type Client-Num delay  0

 !--- Client has cached user response, and so the callback number is !--- returned right away.

   *Mar 1 01:25:30.715: Async4 PPP: I MCB Response(2) id 25 len 17
   *Mar 1 01:25:30.719: Async4 MCB: I 2 19 0 11 2 D F 1 35 32 37
   2D 39 36 35 31 0 
   *Mar 1 01:25:30.723: As4 MCB: Received response

 !--- Received client callback number is 527-9651.

   *Mar 1 01:25:30.723: As4 MCB: Response CBK-Client-Num 2 13 15, addr
   1-527-9651

 !--- Callback number acknowledged.

   *Mar 1 01:25:30.727: Async4 PPP: O MCB Ack(3) id 26 len 17
   *Mar 1 01:25:30.731: Async4 MCB: O 3 1A 0 11 2 D F 1 35 32 37
   2D 39 36 35 31 0 
   *Mar 1 01:25:30.731: As4 MCB: O Ack Id 26 Callback Type Client-Num delay 15
   *Mar 1 01:25:30.735: As4 MCB: Negotiated MCB with peer

 !--- Client hangs up and begins to wait for callback. !--- This is indicated by an Incoming (I) TERMREQ.

   *Mar 1 01:25:30.815: As4 LCP: I TERMREQ [Open] id 5 len 4
   *Mar 1 01:25:30.815: As4 LCP: O TERMACK [Open] id 5 len 4
   *Mar 1 01:25:30.819: As4 MCB: Peer terminating the link
   *Mar 1 01:25:30.819: As4 PPP: Phase is TERMINATING
   *Mar 1 01:25:30.819: As4 MCB: Link terminated by peer, Callback Needed

 !--- Initiate callback to client; sleeps for ten seconds.

   *Mar 1 01:25:30.823: As4 MCB: Initiate Callback for callmeback at 527-9651 
    using Async
   *Mar 1 01:25:30.827: As4 MCB: Async-callback in progress

 !--- Drop modem and B-channel for initial call from client.

   *Mar 1 01:25:31.499: CSM_PROC_IC5_OC6_CONNECTED: CSM_EVENT_MODEM_ONHOOK at
   slot 0, port 3
   *Mar 1 01:25:31.503: VDEV_DEALLOCATE: slot 0 and port 3 is deallocated
   *Mar 1 01:25:31.503: ISDN Se0:23: Event: Hangup call to call id 0xA 
   %ISDN-6-DISCONNECT: Interface Serial0:18 disconnected from unknown , call
   lasted 41 seconds

 !--- Call is completely disconnected.

   *Mar 1 01:25:31.523: ISDN Se0:23: TX -> DISCONNECT pd = 8 callref = 0x8036
   *Mar 1 01:25:31.523: Cause i = 0x8090 - Normal call clearing 
   *Mar 1 01:25:31.583: ISDN Se0:23: RX <- RELEASE pd = 8 callref = 0x36
   *Mar 1 01:25:31.655: ISDN Se0:23: TX -> RELEASE_COMP pd = 8 callref = 0x8036
   %LINEPROTO-5-UPDOWN: Line protocol on Interface Async4, changed state to down
   *Mar 1 01:25:31.851: TTY4: Async Int reset: Dropping DTR
   *Mar 1 01:25:33.695: As4 LCP: TIMEout: Time = 0x4E521C State = TERMsent
   *Mar 1 01:25:33.699: As4 LCP: State is Closed
   *Mar 1 01:25:33.699: As4 PPP: Phase is DOWN
   *Mar 1 01:25:33.703: As4 PPP: Phase is ESTABLISHING, Passive Open
   *Mar 1 01:25:33.707: As4 LCP: State is Listen
   %LINK-5-CHANGED: Interface Async4, changed state to reset
   *Mar 1 01:25:33.879: As4 LCP: State is Closed
   *Mar 1 01:25:33.879: As4 PPP: Phase is DOWN
   *Mar 1 01:25:33.883: As4 IPCP: Remove route to 172.16.25.61
   %LINK-3-UPDOWN: Interface Async4, changed state to down
   *Mar 1 01:25:38.887: As4 LCP: State is Closed
   *Mar 1 01:25:38.887: As4 PPP: Phase is DOWN

 !--- Cleanup from previous call is finished.

  *Mar 1 01:25:40.863: CHAT4: Matched chat script offhook to string offhook
  *Mar 1 01:25:40.867: CHAT4: Asserting DTR

 !--- Modem goes offhook.

   *Mar 1 01:25:40.867: CHAT4: Chat script offhook started
   *Mar 1 01:25:40.871: CHAT4: Sending string: ATH1
   *Mar 1 01:25:40.871: CHAT4: Expecting string: OK
   *Mar 1 01:25:40.911: CSM_PROC_IDLE: CSM_EVENT_MODEM_OFFHOOK at slot 0, port  3
   *Mar 1 01:25:40.963: CHAT4: Completed match for expect: OK
   *Mar 1 01:25:40.967: CHAT4: Chat script offhook finished, status = Success

 !--- Chat script "offhook" was successfully completed.
 
   *Mar 1 01:25:40.967: CHAT4: Matched chat script callback to string callback

 !--- Chat script "callback" is initated.

   *Mar 1 01:25:40.971: CHAT4: Asserting DTR
   *Mar 1 01:25:40.975: CHAT4: Chat script callback started

 !--- Reset modem to known state.

   *Mar 1 01:25:40.975: CHAT4: Sending string: ATZ
   *Mar 1 01:25:40.979: CSM_PROC_OC1_REQUEST_DIGIT: CSM_EVENT_MODEM_ONHOOK at
   slot 0, port 3
   *Mar 1 01:25:40.983: VDEV_DEALLOCATE: slot 0 and port 3 is deallocated
   *Mar 1 01:25:40.979: CHAT4: Expecting string: OK
   *Mar 1 01:25:42.123: CHAT4: Completed match for expect: OK

 !--- Dial the callback number of the client.

   *Mar 1 01:25:42.127: CHAT4: Sending string: ATDT \T<527-9651>
   *Mar 1 01:25:42.131: CHAT4: Expecting string: CONNECT
   *Mar 1 01:25:43.199: CSM_PROC_IDLE: CSM_EVENT_MODEM_OFFHOOK at slot 0, port  3

 !--- Modem/ISDN needs to collect the digits from IOS before it makes the call.

   *Mar 1 01:25:43.327: DSX1_MAIL_FROM_NEAT: DC_READY_RSP: mid = 5, slot = 2,
   unit = 1
   *Mar 1 01:25:43.331: CSM_PROC_OC1_REQUEST_DIGIT:
   CSM_EVENT_DIGIT_COLLECT_READY at slot 0, port 3
   *Mar 1 01:25:43.331: CSM_PROC_OC1_REQUEST_DIGIT:
   CSM_EVENT_ADDR_INFO_COLLECTED at slot 0, port 3
   *Mar 1 01:25:44.327: DSX1_MAIL_FROM_NEAT: DC_FIRST_DIGIT_RSP: mid = 5,
   slot = 2, unit = 1
   *Mar 1 01:25:44.331: CSM_PROC_OC2_COLLECT_1ST_DIGIT:
   CSM_EVENT_GET_1ST_DIGIT at slot 0, port 3
   *Mar 1 01:25:47.331: DSX1_MAIL_FROM_NEAT: DC_ALL_DIGIT_RSP: mid = 5, slot
   = 2, unit = 1
   *Mar 1 01:25:47.331: CSM_PROC_OC3_COLLECT_ALL_DIGIT:
   CSM_EVENT_GET_ALL_DIGITS at slot 0, port 3
   *Mar 1 01:25:47.335: CSM_PROC_OC3_COLLECT_ALL_DIGIT: called party num:
      (5279651) at slot 0, port 3

 !--- Digits have been collected; ISDN call is made.

   *Mar 1 01:25:47.339: process_pri_call making a voice_call.
   *Mar 1 01:25:47.351: ISDN Se0:23: TX -> SETUP pd = 8 callref = 0x0005
   *Mar 1 01:25:47.355: Bearer Capability i = 0x8090A2

 !--- Bearer cap indicates call is an analog call.

   *Mar 1 01:25:47.355: Channel ID i = 0xE1808397
   *Mar 1 01:25:47.359: Called Party Number i = 0xA1, '5279651'
   *Mar 1 01:25:47.431: ISDN Se0:23: RX <- CALL_PROC pd = 8 callref = 0x8005
   *Mar 1 01:25:47.435: Channel ID i = 0xA98397
   *Mar 1 01:25:47.451: EVENT_FROM_ISDN::dchan_idb=0x7F8EE0, call_id=0xA005,
   ces=0x1 bchan=0x16, event=0x3, cause=0x0
   *Mar 1 01:25:47.451: EVENT_FROM_ISDN:(A005): DEV_CALL_PROC at slot 0 and port 3 
   *Mar 1 01:25:47.455: CSM_PROC_OC4_DIALING: 
    CSM_EVENT_ISDN_BCHAN_ASSIGNED at slot 0, port 3
   *Mar 1 01:25:48.147: ISDN Se0:23: RX <- ALERTING pd = 8 callref = 0x8005
   *Mar 1 01:25:48.151: Progress Ind i = 0x8388 - In-band info or
   appropriate now available 
   *Mar 1 01:25:50.835: ISDN Se0:23: RX <- CONNECT pd = 8 callref = 0x8005
   *Mar 1 01:25:50.851: EVENT_FROM_ISDN::dchan_idb=0x7F8EE0, call_id=0xA005,
   ces=0x1 bchan=0x16, event=0x4, cause=0x
   *Mar 1 01:25:50.855: EVENT_FROM_ISDN:(A005): DEV_CONNECTED at slot 0 and port 3
   *Mar 1 01:25:50.859: CSM_PROC_OC5_WAIT_FOR_CARRIER: 
    CSM_EVENT_ISDN_CONNECTED at slot 0, port 3 
   
 !--- ISDN call is connected.

   *Mar 1 01:25:50.867: ISDN Se0:23: TX -> CONNECT_ACK pd = 8 callref = 0x0005
   *Mar 1 01:25:53.735: AAA/AUTHEN: free_user (0x7ADEAC) user='callmeback'
   ruser='' port='Async4' rem_addr='async/4084327528' authen_type=CHAP
   service=PPP priv=1

 !--- Modems have established carrier.

   *Mar 1 01:26:13.487: CHAT4: Completed match for expect: CONNECT
   *Mar 1 01:26:13.491: CHAT4: Sending string: \c
   *Mar 1 01:26:13.491: CHAT4: Chat script callback finished, status = Success
   *Mar 1 01:26:15.415: TTY4: DSR came up
   *Mar 1 01:26:15.419: tty4: Modem: IDLE->READY
   *Mar 1 01:26:15.439: TTY4: EXEC creation
   *Mar 1 01:26:15.443: AAA/AUTHEN: create_user (0x7ADEA4) user='' ruser=''
   port='tty4' rem_addr='async/5279651' authen_type=ASCII service=LOGIN priv=1
   *Mar 1 01:26:15.447: AAA/AUTHEN/START (2043462211): port='tty4'
   list='use-local' action=LOGIN service=LOGIN
   *Mar 1 01:26:15.451: AAA/AUTHEN/START (2043462211): found list use-local
   *Mar 1 01:26:15.451: AAA/AUTHEN/START (2043462211): Method=LOCAL
   *Mar 1 01:26:15.455: AAA/AUTHEN (2043462211): status = GETUSER
   
 !--- PPP negotiation begins again.

   *Mar 1 01:26:16.631: TTY4: Autoselect(2) sample 7E
   %LINK-3-UPDOWN: Interface Async4, changed state to up
   *Mar 1 01:26:18.663: As4 PPP: Treating connection as a dedicated line
   *Mar 1 01:26:18.663: As4 PPP: Phase is ESTABLISHING, Active Open
   *Mar 1 01:26:18.667: As4 LCP: O CONFREQ [Closed] id 5 len 25
   *Mar 1 01:26:18.671: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:26:18.675: As4 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 1 01:26:18.675: As4 LCP: MagicNumber 0x608DF70C (0x0506608DF70C)
   *Mar 1 01:26:18.679: As4 LCP: PFC (0x0702)
   *Mar 1 01:26:18.679: As4 LCP: ACFC (0x0802)
   *Mar 1 01:26:18.779: As4 LCP: I CONFACK [REQsent] id 5 len 25
   *Mar 1 01:26:18.783: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:26:18.787: As4 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 1 01:26:18.787: As4 LCP: MagicNumber 0x608DF70C (0x0506608DF70C)
   *Mar 1 01:26:18.791: As4 LCP: PFC (0x0702)
   *Mar 1 01:26:18.791: As4 LCP: ACFC (0x0802)
   *Mar 1 01:26:19.707: As4 LCP: I CONFREQ [ACKrcvd] id 3 len 20
   *Mar 1 01:26:19.711: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:26:19.711: As4 LCP: MagicNumber 0x004B3EF5 (0x0506004B3EF5)
   *Mar 1 01:26:19.715: As4 LCP: PFC (0x0702)
   *Mar 1 01:26:19.715: As4 LCP: ACFC (0x0802)
   *Mar 1 01:26:19.719: As4 LCP: O CONFACK [ACKrcvd] id 3 len 20
   *Mar 1 01:26:19.723: As4 LCP: ACCM 0x000A0000 (0x0206000A0000)
   *Mar 1 01:26:19.723: As4 LCP: MagicNumber 0x004B3EF5 (0x0506004B3EF5)
   *Mar 1 01:26:19.727: As4 LCP: PFC (0x0702)
   *Mar 1 01:26:19.727: As4 LCP: ACFC (0x0802)
   *Mar 1 01:26:19.731: As4 LCP: State is Open

 !--- Reauthenticate the user.

   *Mar 1 01:26:22.779: As4 PPP: Phase is AUTHENTICATING, by this end
   *Mar 1 01:26:22.783: As4 CHAP: O CHALLENGE id 6 len 28 from "isdn2-2"
   *Mar 1 01:26:22.887: As4 CHAP: I RESPONSE id 6 len 26 from "callmeback"
   *Mar 1 01:26:22.895: AAA/AUTHEN: create_user (0x8F1DAC) user='callmeback'
   ruser='' port='Async4' rem_addr='async/5279651' authen_type=CHAP
   service=PPP priv=1
   *Mar 1 01:26:22.899: AAA/AUTHEN/START (2174906802): port='Async4' list=''
   action=LOGIN service=PPP
   *Mar 1 01:26:22.899: AAA/AUTHEN/START (2174906802): using "default"    list
   *Mar 1 01:26:22.903: AAA/AUTHEN/START (2174906802): Method=LOCAL
   *Mar 1 01:26:22.903: AAA/AUTHEN (2174906802): status = PASS
   *Mar 1 01:26:22.907: AAA/AUTHOR/LCP As4: Authorize LCP
   *Mar 1 01:26:22.911: AAA/AUTHOR/LCP: Async4: (3262137315): user='callmeback'
   *Mar 1 01:26:22.911: AAA/AUTHOR/LCP: Async4: (3262137315): send AV service=ppp
   *Mar 1 01:26:22.915: AAA/AUTHOR/LCP: Async4: (3262137315): send AV
   protocol=lcp
   *Mar 1 01:26:22.915: AAA/AUTHOR/LCP: Async4 (3262137315): Method=LOCAL
   *Mar 1 01:26:22.923: AAA/AUTHOR (3262137315): 
    Post authorization status =PASS_ADD
   *Mar 1 01:26:22.927: AAA/AUTHOR/LCP As4: Processing AV service=ppp
   *Mar 1 01:26:22.927: AAA/AUTHOR/LCP As4: Processing AV protocol=lcp
   *Mar 1 01:26:22.931: AAA/AUTHOR/LCP As4: Processing AV service=ppp
   *Mar 1 01:26:22.931: AAA/AUTHOR/LCP As4: Processing AV protocol=lcp
   *Mar 1 01:26:22.931: AAA/AUTHOR/LCP As4: Processing AV callback-dialstring=
   *Mar 1 01:26:22.939: As4 CHAP: O SUCCESS id 6 len 4
   *Mar 1 01:26:22.943: As4 PPP: Phase is UP
   *Mar 1 01:26:22.947: AAA/AUTHOR/FSM As4: (0): Can we start IPCP?
   *Mar 1 01:26:22.947: AAA/AUTHOR/FSM: Async4: (345798021): user='callmeback'
   *Mar 1 01:26:22.951: AAA/AUTHOR/FSM: Async4: (345798021): send AV service=ppp
   *Mar 1 01:26:22.951: AAA/AUTHOR/FSM: Async4: (345798021): send AV protocol=ip
   *Mar 1 01:26:22.955: AAA/AUTHOR/FSM: Async4 (345798021): Method=LOCAL
   *Mar 1 01:26:22.955: AAA/AUTHOR (345798021): 
    Post authorization status = PASS_REPL
   
 !--- Negotiate IPCP.

   *Mar 1 01:26:22.959: AAA/AUTHOR/FSM As4: We can start IPCP
   *Mar 1 01:26:22.963: As4 IPCP: O CONFREQ [Closed] id 1 len 16
   *Mar 1 01:26:22.967: As4 IPCP: CompressType VJ 15 slots (0x0206002D0F00)
   *Mar 1 01:26:22.967: As4 IPCP: Address 172.16.25.52 (0x0306AC101934)
   *Mar 1 01:26:23.019: As4 IPCP: I CONFREQ [REQsent] id 1 len 40
   *Mar 1 01:26:23.023: As4 IPCP: CompressType VJ 15 slots CompressSlotID
   (0x0206002D0F01)
   *Mar 1 01:26:23.027: As4 IPCP: Address 0.0.0.0 (0x030600000000)
   *Mar 1 01:26:23.027: As4 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
   *Mar 1 01:26:23.031: As4 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
   *Mar 1 01:26:23.035: As4 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
   *Mar 1 01:26:23.035: As4 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
   *Mar 1 01:26:23.039: AAA/AUTHOR/IPCP As4: Start. Her address 0.0.0.0, we
   want 0.0.0.0
   *Mar 1 01:26:23.039: AAA/AUTHOR/IPCP As4: Processing AV service=ppp
   *Mar 1 01:26:23.043: AAA/AUTHOR/IPCP As4: Processing AV protocol=ip
   *Mar 1 01:26:23.043: AAA/AUTHOR/IPCP As4: Authorization succeeded
   *Mar 1 01:26:23.047: AAA/AUTHOR/IPCP As4: Done. Her address 0.0.0.0, we
   want 0.0.0.0
   *Mar 1 01:26:23.047: As4 IPCP: Using pool 'default'
   *Mar 1 01:26:23.051: As4 IPCP: Pool returned 172.16.25.60
   *Mar 1 01:26:23.051: As4 IPCP: O CONFREJ [REQsent] id 1 len 28
   *Mar 1 01:26:23.055: As4 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
   *Mar 1 01:26:23.059: As4 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
   *Mar 1 01:26:23.059: As4 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
   *Mar 1 01:26:23.063: As4 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
   *Mar 1 01:26:23.067: As4 IPCP: I CONFACK [REQsent] id 1 len 16
   *Mar 1 01:26:23.067: As4 IPCP: CompressType VJ 15 slots (0x0206002D0F00)
   *Mar 1 01:26:23.071: As4 IPCP: Address 172.16.25.52 (0x0306AC101934)
   *Mar 1 01:26:23.139: As4 IPCP: I CONFREQ [ACKrcvd] id 2 len 16
   *Mar 1 01:26:23.139: As4 IPCP: CompressType VJ 15 slots CompressSlotID
   (0x0206002D0F01)
   *Mar 1 01:26:23.143: As4 IPCP: Address 0.0.0.0 (0x030600000000)
   *Mar 1 01:26:23.147: AAA/AUTHOR/IPCP As4: Start. Her address 0.0.0.0, we
   want 172.16.25.60
   *Mar 1 01:26:23.147: AAA/AUTHOR/IPCP As4: Processing AV service=ppp
   *Mar 1 01:26:23.151: AAA/AUTHOR/IPCP As4: Processing AV protocol=ip
   *Mar 1 01:26:23.151: AAA/AUTHOR/IPCP As4: Authorization succeeded
   *Mar 1 01:26:23.151: AAA/AUTHOR/IPCP As4: Done. Her address 0.0.0.0, we
   want 172.16.25.60
   *Mar 1 01:26:23.155: As4 IPCP: O CONFNAK [ACKrcvd] id 2 len 10
   *Mar 1 01:26:23.159: As4 IPCP: Address 172.16.25.60 (0x0306AC10193C)
   *Mar 1 01:26:23.255: As4 IPCP: I CONFREQ [ACKrcvd] id 3 len 16
   *Mar 1 01:26:23.259: As4 IPCP: CompressType VJ 15 slots CompressSlotID
   (0x0206002D0F01)
   *Mar 1 01:26:23.263: As4 IPCP: Address 172.16.25.60 (0x0306AC10193C)
   *Mar 1 01:26:23.263: AAA/AUTHOR/IPCP As4: Start. Her address
   172.16.25.60, we want 172.16.25.60
   *Mar 1 01:26:23.267: AAA/AUTHOR/IPCP: Async4: (3819567164): user='callmeback'
   *Mar 1 01:26:23.271: AAA/AUTHOR/IPCP: Async4: (3819567164): send AV
   service=ppp
   *Mar 1 01:26:23.271: AAA/AUTHOR/IPCP: Async4: (3819567164): send AV
   protocol=ip
   *Mar 1 01:26:23.275: AAA/AUTHOR/IPCP: Async4: (3819567164): send AV
   addr*172.16.25.60
   *Mar 1 01:26:23.275: AAA/AUTHOR/IPCP: Async4 (3819567164): Method=LOCAL
   *Mar 1 01:26:23.279: AAA/AUTHOR (3819567164): Post authorization status =
   PASS_REPL
   *Mar 1 01:26:23.283: AAA/AUTHOR/IPCP As4: Reject 172.16.25.60, using
   172.16.25.60
   *Mar 1 01:26:23.287: AAA/AUTHOR/IPCP As4: Processing AV service=ppp
   *Mar 1 01:26:23.291: AAA/AUTHOR/IPCP As4: Processing AV protocol=ip
   *Mar 1 01:26:23.291: AAA/AUTHOR/IPCP As4: Processing AV addr*172.16.25.60
   *Mar 1 01:26:23.295: AAA/AUTHOR/IPCP As4: Authorization succeeded
   *Mar 1 01:26:23.295: AAA/AUTHOR/IPCP As4: Done. Her address 172.16.25.60,
   we want 172.16.25.60
   *Mar 1 01:26:23.299: As4 IPCP: O CONFACK [ACKrcvd] id 3 len 16
   *Mar 1 01:26:23.303: As4 IPCP: CompressType VJ 15 slots CompressSlotID
   (0x0206002D0F01)
   *Mar 1 01:26:23.303: As4 IPCP: Address 172.16.25.60 (0x0306AC10193C)
   *Mar 1 01:26:23.307: As4 IPCP: State is Open
   *Mar 1 01:26:23.323: As4 IPCP: Install route to 172.16.25.60
   %LINEPROTO-5-UPDOWN: Line protocol on Interface Async4, changed state to up
   
 !--- Client is connected.

Informazioni correlate

Cronologia delle revisioni

Revisione Data di pubblicazione Commenti
1.0
29-Jan-2008
Versione iniziale

Contributo di

  • aaron
    panico

Questo documento ti è stato utile?

FeedbackFeedback

Contattaci

Questo documento si applica a questi prodotti