Guide de référence rapide pour collecter les sorties demandées par le TAC auprès des commutateurs Nexus

Options de téléchargement

PDF (151.4 KB)
Consulter à l'aide d'Adobe Reader sur un grand nombre d'appareils
ePub (88.2 KB)
Consulter à l’aide de différentes applications sur iPhone, iPad, Android ou Windows Phone
Mobi (Kindle) (80.9 KB)
Consulter sur un appareil Kindle ou à l’aide d’une application Kindle sur plusieurs appareils

Mis à jour:8 février 2019

ID du document:214107

Langage exempt de préjugés

Dans le cadre de la documentation associée à ce produit, nous nous efforçons d’utiliser un langage exempt de préjugés. Dans cet ensemble de documents, le langage exempt de discrimination renvoie à une langue qui exclut la discrimination en fonction de l’âge, des handicaps, du genre, de l’appartenance raciale de l’identité ethnique, de l’orientation sexuelle, de la situation socio-économique et de l’intersectionnalité. Des exceptions peuvent s’appliquer dans les documents si le langage est codé en dur dans les interfaces utilisateurs du produit logiciel, si le langage utilisé est basé sur la documentation RFP ou si le langage utilisé provient d’un produit tiers référencé. Découvrez comment Cisco utilise le langage inclusif.

À propos de cette traduction

Cisco a traduit ce document en traduction automatisée vérifiée par une personne dans le cadre d’un service mondial permettant à nos utilisateurs d’obtenir le contenu d’assistance dans leur propre langue. Il convient cependant de noter que même la meilleure traduction automatisée ne sera pas aussi précise que celle fournie par un traducteur professionnel.

Contenu

Introduction

Nexus 3000

Nexus 5000/6000

Nexus 7000

Nexus 9000

Introduction

Ce document répertorie l'ensemble générique de commandes à collecter auprès des commutateurs Nexus pendant/après un problème pour les cas TAC.

La liste des commandes peut être collée au cli du commutateur exactement comme indiqué sans aucune modification. Certaines commandes peuvent être erronées si les fonctionnalités correspondantes ne sont pas implémentées. Ce résultat est attendu et ne posera aucun problème.

Si vous avez associé de manière proactive un show tech au dossier TAC, vous pouvez ignorer la liste ci-dessous.

Nexus 3000

La liste des commandes peut être collée au cli du commutateur exactement comme indiqué sans aucune modification. $(SWITCHNAME) sera automatiquement remplacé par le nom d'hôte.

echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

!zip the file
gzip $(SWITCHNAME)_cmds_for_tac_case.txt

Nexus 5000/6000

echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

!zip the file
gzip $(SWITCHNAME)_cmds_for_tac_case.txt

Nexus 7000

!COLLECTEZ CES SORTIES À PARTIR DU VDC D'ADMINISTRATION ET DU VDC EN QUESTION.

echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vdc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vdc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

!zip the file

gzip $(SWITCHNAME)_cmds_for_tac_case.txt

Nexus 9000

echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

!zip the file

gzip $(SWITCHNAME)_cmds_for_tac_case.txt

Guide de référence rapide pour collecter les sorties demandées par le TAC auprès des commutateurs Nexus

Options de téléchargement

Langage exempt de préjugés

À propos de cette traduction

Contenu

Introduction

Nexus 3000

Nexus 5000/6000

Nexus 7000

Nexus 9000

Ce document vous est-il utile?

Contacter Cisco

Ce document s’applique à ces produits