Configurar DMVPN y servidor Easy VPN con perfiles ISAKMP
Contenido
Introducción
Este documento describe cómo configurar Dynamic Multipoint VPN (DMVPN) y Easy VPN con Xauth en el mismo router. Esta configuración ofrece spokes DMVPN que se atienden dinámicamente. ISAKMP (Internet Security Association and Key Management Protocol) proporciona la capacidad de separar los métodos de autentificación de spokes atendidos DMVPN dinámicamente de Easy VPN Clients.
Prerequisites
Requirements
No hay requisitos específicos para este documento.
Componentes Utilizados
La información que contiene este documento se basa en las siguientes versiones de software y hardware.
-
Routers Cisco 2691 y 3725 que ejecutan Cisco IOS® Software Releases 12.3(3) y 12.3(3)a
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Convenciones
Configurar
En esta sección encontrará la información para configurar las funciones descritas en este documento.
Nota: Use la Command Lookup Tool (sólo clientes registrados) para obtener más información sobre los comandos utilizados en este documento.
Diagrama de la red
Este documento utiliza esta configuración de red:
Configuraciones
Este documento usa estas configuraciones.
| Configuración del eje de conexión sv9-2 |
|---|
sv9-2#show run Building configuration... Current configuration : 2876 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-2 ! boot-start-marker boot-end-marker ! enable password cisco ! username cisco password 0 cisco aaa new-model ! ! !--- Xauth is configured for local authentication. aaa authentication login userauthen local aaa authorization network hw-client-groupname local aaa session-id common ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ip ssh break-string no ftp-server write-enable ! ! !--- Keyring that defines the wildcard pre-shared key. crypto keyring dmvpnspokes pre-shared-key address 0.0.0.0 0.0.0.0 key cisco123 ! !--- Create an ISAKMP policy for Phase 1 negotiations. !--- This policy is for DMVPN spokes. crypto isakmp policy 10 hash md5 authentication pre-share ! !--- Create an ISAKMP policy for Phase 1 negotiations. !--- This policy is for Easy VPN Clients. crypto isakmp policy 20 hash md5 authentication pre-share group 2 ! !--- VPN Client configuration for group "hw-client-groupname" !--- (this name is configured in the VPN Client). crypto isakmp client configuration group hw-client-groupname key hw-client-password dns 1.1.11.10 1.1.11.11 wins 1.1.11.12 1.1.11.13 domain cisco.com pool dynpool !--- Profile for VPN Client connections, matches the !--- "hw-client-group" group and defines the XAuth properties. crypto isakmp profile VPNclient match identity group hw-client-groupname client authentication list userauthen isakmp authorization list hw-client-groupname client configuration address respond !--- Profile for LAN-to-LAN connection, references !--- the wildcard pre-shared key and a wildcard !--- identity (this is what is broken in !--- Cisco bug ID CSCea77140) !--- and no XAuth. crypto isakmp profile DMVPN keyring dmvpnspokes match identity address 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac mode transport ! !--- Create an IPsec profile to be applied dynamically to the !--- generic routing encapsulation (GRE) over IPsec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong set isakmp-profile DMVPN ! ! !--- This dynamic crypto map references the ISAKMP !--- Profile VPN Client above. !--- Reverse route injection is used to provide the !--- DMVPN networks access to any Easy VPN Client networks. crypto dynamic-map dynmap 10 set isakmp-profile VPNclient reverse-route set transform-set strong ! ! !--- Crypto map only references the dynamic crypto map above. crypto map dynmap 1 ipsec-isakmp dynamic dynmap ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! !--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.1 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp network-id 1 ip nhrp holdtime 300 no ip split-horizon eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! interface FastEthernet0/0 ip address 209.168.202.225 255.255.255.0 duplex auto speed auto crypto map dynmap ! interface FastEthernet0/1 ip address 1.1.1.1 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 redistribute static network 1.1.1.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip local pool dynpool 1.1.11.60 1.1.11.80 ip http server no ip http secure-server ip classless ! ! ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 password cisco transport preferred all transport input all transport output all ! ! end |
| Configuración radial sv9-3 |
|---|
sv9-3#show run Building configuration... Current configuration : 2052 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-3 ! boot-start-marker boot system flash:c3725-ik9o3s-mz.123-3.bin boot-end-marker ! ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ip ssh break-string no ftp-server write-enable ! ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all remote VPN routers. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac mode transport ! !--- Create an IPsec profile to be applied dynamically to the !--- GRE over IPsec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! no voice hpi capture buffer no voice hpi capture destination ! ! !--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.3 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp holdtime 300 ip nhrp nhs 192.168.1.1 no ip split-horizon eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! interface FastEthernet0/0 ip address 209.168.202.130 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 ip address 3.3.3.3 255.255.255.0 duplex auto speed auto ! interface BRI1/0 no ip address shutdown ! interface BRI1/1 no ip address shutdown ! interface BRI1/2 no ip address shutdown ! interface BRI1/3 no ip address shutdown ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 3.3.3.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.225 ip route 2.2.2.0 255.255.255.0 Tunnel0 ! ! line con 0 exec-timeout 0 0 transport preferred all transport output all escape-character 27 line aux 0 transport preferred all transport output all line vty 0 4 login transport preferred all transport input all transport output all ! ! end |
| Configuración de Spoke sv9-4 |
|---|
sv9-4#show run Building configuration... Current configuration : 1992 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname sv9-4 ! boot-start-marker boot system flash:c2691-jk9o3s-mz.123-3a.bin boot-end-marker ! enable password cisco ! no aaa new-model ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ip ssh break-string no ftp-server write-enable ! ! ! !--- Create an ISAKMP policy for Phase 1 negotiations. crypto isakmp policy 10 hash md5 authentication pre-share !--- Add dynamic pre-shared keys for all remote VPN routers. crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! !--- Create the Phase 2 policy for actual data encryption. crypto ipsec transform-set strong esp-3des esp-md5-hmac mode transport ! !--- Create an IPsec profile apply dynamically to the !--- GRE over IPsec tunnels. crypto ipsec profile cisco set security-association lifetime seconds 120 set transform-set strong ! ! no voice hpi capture buffer no voice hpi capture destination ! ! !--- Create a GRE tunnel template which is applied to !--- all the dynamically created GRE tunnels. interface Tunnel0 ip address 192.168.1.2 255.255.255.0 no ip redirects ip mtu 1440 ip nhrp authentication cisco123 ip nhrp map multicast dynamic ip nhrp map 192.168.1.1 209.168.202.225 ip nhrp map multicast 209.168.202.225 ip nhrp network-id 1 ip nhrp holdtime 300 ip nhrp nhs 192.168.1.1 no ip split-horizon eigrp 90 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 0 tunnel protection ipsec profile cisco ! interface FastEthernet0/0 ip address 209.168.202.131 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 ip address 2.2.2.2 255.255.255.0 duplex auto speed auto ! !--- Enable a routing protocol to send and receive !--- dynamic updates about the private networks. router eigrp 90 network 2.2.2.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 209.168.202.225 ! ! dial-peer cor custom ! ! line con 0 exec-timeout 0 0 transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh escape-character 27 line aux 0 transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh line vty 0 4 login transport input lat pad v120 lapb-ta mop telnet rlogin udptn ssh transport output lat pad v120 lapb-ta mop telnet rlogin udptn ssh ! ! end |
Verificación
En esta sección encontrará información que puede utilizar para comprobar que su configuración funcione correctamente.
Los comandos de depuración que se ejecutan en el router hub confirman que los parámetros correctos coinciden con las conexiones spoke y VPN Client. Ejecute estos comandos debug.
La herramienta Output Interpreter Tool (clientes registrados solamente) (OIT) soporta ciertos comandos show. Utilice la OIT para ver un análisis del resultado del comando show.
Nota: Consulte Información Importante sobre Comandos Debug antes de utilizar los comandos debug.
-
debug crypto isakmp — Muestra mensajes acerca de eventos IKE.
-
debug crypto ipsec—Muestra información acerca de eventos de IPSec.
sv9-2#
*Mar 13 04:38:21.187: ISAKMP (0:0): received packet from 209.168.202.130
dport 500 sport 500 Global (N) NEW SA
*Mar 13 04:38:21.187: ISAKMP: local port 500, remote port 500
*Mar 13 04:38:21.187: ISAKMP: insert sa successfully sa = 63F585CC
*Mar 13 04:38:21.187: ISAKMP (0:689): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Mar 13 04:38:21.187: ISAKMP (0:689): Old State = IKE_READY New State = IKE_R_MM1
*Mar 13 04:38:21.187: ISAKMP (0:689): processing SA payload. message ID = 0
*Mar 13 04:38:21.187: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.187: ISAKMP (0:689): vendor ID seems Unity/DPD but
major 157 mismatch
*Mar 13 04:38:21.187: ISAKMP (0:689): vendor ID is NAT-T v3
*Mar 13 04:38:21.187: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.191: ISAKMP (0:689): vendor ID seems Unity/DPD but
major 123 mismatch
*Mar 13 04:38:21.191: ISAKMP (0:689): vendor ID is NAT-T v2
*Mar 13 04:38:21.191: ISAKMP: Looking for a matching key for 209.168.202.130
in default
*Mar 13 04:38:21.191: ISAKMP: Looking for a matching key for 209.168.202.130
in dmvpnspokes : success
*Mar 13 04:38:21.191: ISAKMP (0:689): found peer pre-shared key matching
209.168.202.130
*Mar 13 04:38:21.191: ISAKMP (0:689) local preshared key found
*Mar 13 04:38:21.191: ISAKMP : Scanning profiles for xauth ... VPNclient
*Mar 13 04:38:21.191: ISAKMP (0:689) Authentication by xauth preshared
*Mar 13 04:38:21.191: ISAKMP (0:689): Checking ISAKMP transform 1 against
priority 10 policy
*Mar 13 04:38:21.191: ISAKMP: encryption DES-CBC
*Mar 13 04:38:21.191: ISAKMP: hash MD5
*Mar 13 04:38:21.191: ISAKMP: default group 1
*Mar 13 04:38:21.191: ISAKMP: auth pre-share
*Mar 13 04:38:21.191: ISAKMP: life type in seconds
*Mar 13 04:38:21.191: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
*Mar 13 04:38:21.191: ISAKMP (0:689): atts are acceptable. Next payload is 0
*Mar 13 04:38:21.195: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID seems Unity/DPD but major
157 mismatch
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID is NAT-T v3
*Mar 13 04:38:21.195: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID seems Unity/DPD but
major 123 mismatch
*Mar 13 04:38:21.195: ISAKMP (0:689): vendor ID is NAT-T v2
*Mar 13 04:38:21.195: ISAKMP (0:689): Input = IKE_MESG_INTERNAL,
IKE_PROCESS_MAIN_MODE
*Mar 13 04:38:21.195: ISAKMP (0:689): Old State = IKE_R_MM1 New State = IKE_R_MM1
*Mar 13 04:38:21.195: ISAKMP (0:689): constructed NAT-T vendor-03 ID
*Mar 13 04:38:21.195: ISAKMP (0:689): sending packet to 209.168.202.130
my_port 500 peer_port 500 (R) MM_SA_SETUP
*Mar 13 04:38:21.195: ISAKMP (0:689): Input = IKE_MESG_INTERNAL,
IKE_PROCESS_COMPLETE
*Mar 13 04:38:21.195: ISAKMP (0:689): Old State = IKE_R_MM1 New State = IKE_R_MM2
*Mar 13 04:38:21.203: ISAKMP (0:689): received packet from 209.168.202.130 dport
500 sport 500 Global (R) MM_SA_SETUP
*Mar 13 04:38:21.203: ISAKMP (0:689): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Mar 13 04:38:21.203: ISAKMP (0:689): Old State = IKE_R_MM2 New State = IKE_R_MM3
*Mar 13 04:38:21.203: ISAKMP (0:689): processing KE payload. message ID = 0
*Mar 13 04:38:21.211: ISAKMP (0:689): processing NONCE payload. message ID = 0
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130
in default
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130
in dmvpnspokes : success
*Mar 13 04:38:21.211: ISAKMP (0:689): found peer pre-shared key matching
209.168.202.130
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130
in default
*Mar 13 04:38:21.211: ISAKMP: Looking for a matching key for 209.168.202.130
in dmvpnspokes : success
*Mar 13 04:38:21.211: ISAKMP (0:689): found peer pre-shared key matching
209.168.202.130
*Mar 13 04:38:21.215: ISAKMP (0:689): SKEYID state generated
*Mar 13 04:38:21.215: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.215: ISAKMP (0:689): vendor ID is Unity
*Mar 13 04:38:21.215: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.215: ISAKMP (0:689): vendor ID is DPD
*Mar 13 04:38:21.215: ISAKMP (0:689): processing vendor id payload
*Mar 13 04:38:21.215: ISAKMP (0:689): speaking to another IOS box!
*Mar 13 04:38:21.215: ISAKMP:received payload type 17
*Mar 13 04:38:21.215: ISAKMP:received payload type 17
*Mar 13 04:38:21.215: ISAKMP (0:689): Input = IKE_MESG_INTERNAL,
IKE_PROCESS_MAIN_MODE
*Mar 13 04:38:21.215: ISAKMP (0:689): Old State = IKE_R_MM3 New State = IKE_R_MM3
*Mar 13 04:38:21.215: ISAKMP (0:689): sending packet to 209.168.202.130
my_port 500 peer_port 500 (R) MM_KEY_EXCH
*Mar 13 04:38:21.215: ISAKMP (0:689): Input = IKE_MESG_INTERNAL,
IKE_PROCESS_COMPLETE
*Mar 13 04:38:21.215: ISAKMP (0:689): Old State = IKE_R_MM3 New State = IKE_R_MM4
*Mar 13 04:38:21.227: ISAKMP (0:689): received packet from 209.168.202.130
dport 500 sport 500 Global (R) MM_KEY_EXCH
*Mar 13 04:38:21.227: ISAKMP (0:689): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Mar 13 04:38:21.227: ISAKMP (0:689): Old State = IKE_R_MM4 New State = IKE_R_MM5
*Mar 13 04:38:21.227: ISAKMP (0:689): processing ID payload. message ID = 0
*Mar 13 04:38:21.227: ISAKMP (0:689): peer matches DMVPN profile
*Mar 13 04:38:21.227: ISAKMP: Looking for a matching key for 209.168.202.130
in default
*Mar 13 04:38:21.227: ISAKMP: Looking for a matching key for 209.168.202.130
in dmvpnspokes : success
*Mar 13 04:38:21.227: ISAKMP (0:689): Found ADDRESS key in keyring dmvpnspokes
*Mar 13 04:38:21.227: ISAKMP (0:689): processing HASH payload. message ID = 0
*Mar 13 04:38:21.227: ISAKMP (0:689): processing NOTIFY INITIAL_CONTACT protocol 1
spi 0, message ID = 0, sa = 63F585CC
*Mar 13 04:38:21.227: ISAKMP (0:689): Process initial contact,
bring down existing phase 1 and 2 SA's with local
209.168.202.225 remote
209.168.202.130 remote port 500
*Mar 13 04:38:21.227: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.231: ISAKMP (0:689): SA has been authenticated
with 209.168.202.130
*Mar 13 04:38:21.231: ISAKMP (0:689): Input = IKE_MESG_INTERNAL,
IKE_PROCESS_MAIN_MODE
*Mar 13 04:38:21.231: ISAKMP (0:689): Old State = IKE_R_MM5 New State = IKE_R_MM5
*Mar 13 04:38:21.231: ISAKMP (0:689): SA is doing pre-shared key
authentication using id type ID_IPV4_ADDR
*Mar 13 04:38:21.231: ISAKMP (689): ID payload
next-payload : 8
type : 1
addr : 209.168.202.225
protocol : 17
port : 500
length : 8
*Mar 13 04:38:21.231: ISAKMP (689): Total payload length: 12
*Mar 13 04:38:21.231: ISAKMP (0:689): sending packet to 209.168.202.130
my_port 500 peer_port 500 (R) MM_KEY_EXCH
*Mar 13 04:38:21.231: ISAKMP (0:689): Input = IKE_MESG_INTERNAL,
IKE_PROCESS_COMPLETE
*Mar 13 04:38:21.231: ISAKMP (0:689): Old State = IKE_R_MM5 New State =
IKE_P1_COMPLETE
*Mar 13 04:38:21.231: ISAKMP (0:689): Input = IKE_MESG_INTERNAL,
IKE_PHASE1_COMPLETE
*Mar 13 04:38:21.231: ISAKMP (0:689): Old State = IKE_P1_COMPLETE
New State = IKE_P1_COMPLETE
*Mar 13 04:38:21.235: ISAKMP (0:689): received packet from
209.168.202.130 dport 500 sport 500 Global (R) QM_IDLE
*Mar 13 04:38:21.235: ISAKMP: set new node -1213418274 to QM_IDLE
*Mar 13 04:38:21.235: ISAKMP (0:689): processing HASH payload. message ID = -1213418274
*Mar 13 04:38:21.235: ISAKMP (0:689): processing SA payload. message ID = -1213418274
*Mar 13 04:38:21.235: ISAKMP (0:689): Checking IPSec proposal 1
*Mar 13 04:38:21.235: ISAKMP: transform 1, ESP_3DES
*Mar 13 04:38:21.235: ISAKMP: attributes in transform:
*Mar 13 04:38:21.235: ISAKMP: encaps is 2
*Mar 13 04:38:21.235: ISAKMP: SA life type in seconds
*Mar 13 04:38:21.235: ISAKMP: SA life duration (basic) of 120
*Mar 13 04:38:21.235: ISAKMP: SA life type in kilobytes
*Mar 13 04:38:21.235: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
*Mar 13 04:38:21.235: ISAKMP: authenticator is HMAC-MD5
*Mar 13 04:38:21.235: ISAKMP (0:689): atts are acceptable.
*Mar 13 04:38:21.235: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130,
local_proxy= 209.168.202.225/255.255.255.255/47/0 (type=1),
remote_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 0s and 0kb,
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
*Mar 13 04:38:21.239: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.239: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.239: ISAKMP (0:689): processing NONCE payload.
message ID = -1213418274
*Mar 13 04:38:21.239: ISAKMP (0:689): processing ID payload.
message ID = -1213418274
*Mar 13 04:38:21.239: ISAKMP (0:689): processing ID payload.
message ID = -1213418274
*Mar 13 04:38:21.239: ISAKMP (0:689): asking for 1 spis from ipsec
*Mar 13 04:38:21.239: ISAKMP (0:689): Node -1213418274, Input =
IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Mar 13 04:38:21.239: ISAKMP (0:689): Old State = IKE_QM_READY
New State = IKE_QM_SPI_STARVE
*Mar 13 04:38:21.239: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.239: IPSEC(spi_response): getting spi 3759277150 for SA
from 209.168.202.225 to 209.168.202.130 for prot 3
*Mar 13 04:38:21.239: ISAKMP (0:689): received packet from
209.168.202.130 dport 500 sport 500 Global (R) QM_IDLE
*Mar 13 04:38:21.239: ISAKMP: set new node -1392382616 to QM_IDLE
*Mar 13 04:38:21.239: ISAKMP (0:689): processing HASH payload.
message ID = -1392382616
*Mar 13 04:38:21.239: ISAKMP (0:689): processing SA payload.
message ID = -1392382616
*Mar 13 04:38:21.239: ISAKMP (0:689): Checking IPSec proposal 1
*Mar 13 04:38:21.239: ISAKMP: transform 1, ESP_3DES
*Mar 13 04:38:21.239: ISAKMP: attributes in transform:
*Mar 13 04:38:21.239: ISAKMP: encaps is 2
*Mar 13 04:38:21.239: ISAKMP: SA life type in seconds
*Mar 13 04:38:21.239: ISAKMP: SA life duration (basic) of 120
*Mar 13 04:38:21.239: ISAKMP: SA life type in kilobytes
*Mar 13 04:38:21.239: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
*Mar 13 04:38:21.239: ISAKMP: authenticator is HMAC-MD5
*Mar 13 04:38:21.239: ISAKMP (0:689): atts are acceptable.
*Mar 13 04:38:21.243: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130,
local_proxy= 209.168.202.225/255.255.255.255/47/0 (type=1),
remote_proxy= 209.168.202.130/255.255.255.255/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 0s and 0kb,
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
*Mar 13 04:38:21.243: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.243: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.243: ISAKMP (0:689): processing NONCE payload.
message ID = -1392382616
*Mar 13 04:38:21.243: ISAKMP (0:689): processing ID payload.
message ID = -1392382616
*Mar 13 04:38:21.243: ISAKMP (0:689): processing ID payload.
message ID = -1392382616
*Mar 13 04:38:21.243: ISAKMP (0:689): asking for 1 spis from ipsec
*Mar 13 04:38:21.243: ISAKMP (0:689): Node -1392382616, Input =
IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Mar 13 04:38:21.243: ISAKMP (0:689): Old State = IKE_QM_READY
New State = IKE_QM_SPI_STARVE
*Mar 13 04:38:21.243: ISAKMP: received ke message (2/1)
*Mar 13 04:38:21.243: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.243: IPSEC(spi_response): getting spi 1258185233 for SA
from 209.168.202.225 to 209.168.202.130 for prot 3
*Mar 13 04:38:21.243: ISAKMP: received ke message (2/1)
*Mar 13 04:38:21.491: ISAKMP (0:689): sending packet to
209.168.202.130 my_port 500 peer_port 500 (R) QM_IDLE
*Mar 13 04:38:21.491: ISAKMP (0:689): Node -1213418274, Input =
IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
*Mar 13 04:38:21.491: ISAKMP (0:689): Old State = IKE_QM_SPI_STARVE
New State = IKE_QM_R_QM2
*Mar 13 04:38:21.495: ISAKMP (0:689): sending packet to 209.168.202.130
my_port 500 peer_port 500 (R) QM_IDLE
*Mar 13 04:38:21.495: ISAKMP (0:689): Node -1392382616, Input =
IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
*Mar 13 04:38:21.495: ISAKMP (0:689): Old State = IKE_QM_SPI_STARVE
New State = IKE_QM_R_QM2
*Mar 13 04:38:21.503: ISAKMP (0:689): received packet from 209.168.202.130
dport 500 sport 500 Global (R) QM_IDLE
*Mar 13 04:38:21.511: ISAKMP (0:689): Creating IPSec SAs
*Mar 13 04:38:21.511: inbound SA from 209.168.202.130 to
209.168.202.225 (f/i) 0/ 0
(proxy 209.168.202.130 to 209.168.202.225)
*Mar 13 04:38:21.511: has spi 0xE012045E and conn_id 13777 and flags 4
*Mar 13 04:38:21.511: lifetime of 120 seconds
*Mar 13 04:38:21.511: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.511: has client flags 0x0
*Mar 13 04:38:21.511: outbound SA from 209.168.202.225 to
209.168.202.130 (f/i) 0/ 0 (proxy 209.168.202.225
to 209.168.202.130)
*Mar 13 04:38:21.511: has spi 1398157896 and conn_id 13778 and flags C
*Mar 13 04:38:21.511: lifetime of 120 seconds
*Mar 13 04:38:21.511: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.511: has client flags 0x0
*Mar 13 04:38:21.511: ISAKMP (0:689): deleting node -1213418274 error
FALSE reason "quick mode done (await)"
*Mar 13 04:38:21.511: ISAKMP (0:689): Node -1213418274, Input =
IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Mar 13 04:38:21.511: ISAKMP (0:689): Old State = IKE_QM_R_QM2
New State = IKE_QM_PHASE2_COMPLETE
*Mar 13 04:38:21.511: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.511: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130,
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1),
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 120s and 4608000kb,
spi= 0xE012045E(3759277150), conn_id= 13777, keysize= 0, flags= 0x4
*Mar 13 04:38:21.511: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 209.168.202.225, remote= 209.168.202.130,
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1),
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 120s and 4608000kb,
spi= 0x53563248(1398157896), conn_id= 13778, keysize= 0, flags= 0xC
*Mar 13 04:38:21.511: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.511: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.511: IPSEC(add mtree): src 209.168.202.225, dest
209.168.202.130, dest_port 0
*Mar 13 04:38:21.511: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.225, sa_prot= 50,
sa_spi= 0xE012045E(3759277150),
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13777
*Mar 13 04:38:21.511: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.130, sa_prot= 50,
sa_spi= 0x53563248(1398157896),
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13778
*Mar 13 04:38:21.511: ISAKMP (0:689): received packet from
209.168.202.130 dport 500 sport 500 Global (R) QM_IDLE
*Mar 13 04:38:21.519: ISAKMP (0:689): Creating IPSec SAs
*Mar 13 04:38:21.519: inbound SA from 209.168.202.130 to 209.168.202.225 (f/i) 0/ 0
(proxy 209.168.202.130 to 209.168.202.225)
*Mar 13 04:38:21.519: has spi 0x4AFE6211 and conn_id 13779 and flags 4
*Mar 13 04:38:21.519: lifetime of 120 seconds
*Mar 13 04:38:21.519: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.519: has client flags 0x0
*Mar 13 04:38:21.519: outbound SA from 209.168.202.225 to 209.168.202.130
(f/i) 0/ 0 (proxy 209.168.202.225 to 209.168.202.130)
*Mar 13 04:38:21.523: has spi -1567576395 and conn_id 13780 and flags C
*Mar 13 04:38:21.523: lifetime of 120 seconds
*Mar 13 04:38:21.523: lifetime of 4608000 kilobytes
*Mar 13 04:38:21.523: has client flags 0x0
*Mar 13 04:38:21.523: ISAKMP (0:689): deleting node -1392382616 error
FALSE reason "quick mode done (await)"
*Mar 13 04:38:21.523: ISAKMP (0:689): Node -1392382616, Input = IKE_MESG_FROM_PEER,
IKE_QM_EXCH
*Mar 13 04:38:21.523: ISAKMP (0:689): Old State = IKE_QM_R_QM2 New State =
IKE_QM_PHASE2_COMPLETE
*Mar 13 04:38:21.523: IPSEC(key_engine): got a queue event...
*Mar 13 04:38:21.523: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 209.168.202.225, remote= 209.168.202.130,
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1),
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 120s and 4608000kb,
spi= 0x4AFE6211(1258185233), conn_id= 13779, keysize= 0, flags= 0x4
*Mar 13 04:38:21.523: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 209.168.202.225, remote= 209.168.202.130,
local_proxy= 209.168.202.225/0.0.0.0/47/0 (type=1),
remote_proxy= 209.168.202.130/0.0.0.0/47/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 120s and 4608000kb,
spi= 0xA290AEB5(2727390901), conn_id= 13780, keysize= 0, flags= 0xC
*Mar 13 04:38:21.523: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.523: IPSEC(kei_proxy): head = Tunnel0-head-0,
map->ivrf = , kei->ivrf =
*Mar 13 04:38:21.523: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.225, sa_prot= 50,
sa_spi= 0x4AFE6211(1258185233),
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13779
*Mar 13 04:38:21.523: IPSEC(create_sa): sa created,
(sa) sa_dest= 209.168.202.130, sa_prot= 50,
sa_spi= 0xA290AEB5(2727390901),
sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 13780
*Mar 13 04:38:21.571: ISAKMP (0:687): purging node -114623302
*Mar 13 04:38:24.339: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 90: Neighbor
192.168.1.3 (Tunnel0) is up: new adjacency
Troubleshoot
Para obtener información adicional sobre la solución de problemas, consulte Solución de problemas de seguridad IP - Comprensión y uso de los comandos debug.
Información Relacionada
Historial de revisiones
| Revisión | Fecha de publicación | Comentarios |
|---|---|---|
1.0 |
06-Dec-2006 |
Versión inicial |
ComentariosContacte a Cisco
- Abrir un caso de soporte
- (Requiere un Cisco Service Contract)