The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Configures advanced tuning parameters.
Exec > Global Configuration
advance-tuning { n7-stale-session-error-codes error_codes | redis-password redis_password} Specify the comma-separated list of N7Notify stale session error codes.
Must be a string.
Specify the Redis password.
Use this command to configure advanced tuning parameters.
Configures threading configuration for HTTP outgoing request from PCF.
Exec > Global Configuration
advance-tuning async-threading { default-drop-oldest-when-full { false | true } | default-priority default_priority | default-processing-threads processing_thread_number | default-queue-size default_queue_size | default-worker-threads default_number_worker_threads | request-timeout-ms request_timeout | thread-configuration service_name drop-oldest-when-full { false | true } | priority thread_priority | queue-size queue_size | threads thread_number} Specify to drop the oldest packet when queue is full.
Must be one of the following:
false
true
Default Value: false.
Specify the default priority of thread.
Must be an integer.
Default Value: 5.
Specify the default number of processing threads.
Must be an integer.
Default Value: 10.
Specify the default size of the queue.
Must be an integer.
Default Value: 100.
Specify the default number of worker threads.
Must be an integer.
Default Value: 20.
Specify the request timeout period in milliseconds.
Must be an integer.
Default Value: 100.
Specify the idle connection timeout for HTTP2 client.
Must be an integer.
Default Value: 60.
Specify the maximum request timeouts to reconnect HTTP2 connection.
Must be an integer.
Default Value: 0.
Use this command to configure threading configuration for HTTP outgoing request from PCF.
advance-tuning async-threading default-priority 5 Configures threading configuration of servicethreading.
Exec > Global Configuration
threading-config service_name Specify to drop the oldest packet when the queue is full.
Must be one of the following:
false
true
Specify the threading priority.
Must be an integer.
Specify the size of the queue.
Must be an integer.
Specify the service name.
Must be a string.
Specify the number of threads.
Must be an integer.
Use this command to configure threading configuration of service.
Enables HTTP2 connection recovery parameters via closing connection.
Exec > Global Configuration
brute-force-recovery { max-reconnects max_http2_reconnects | time-interval-mins time_interval} Specify the maximum number of HTTP2 reconnect attempts to be allowed before restarting REST endpoint for recovery. Counter for previous reconnect attempts gets reset as per time-interval-mins. When set to 0, restart of rest endpoint is not performed even on reaching configured count and system continues attempting reconnect for recovery.
Must be an integer.
Default Value: 0.
Specify the time interval in minutes. If there is no HTTP2 reconnect triggered due to timeout for specified duration plus 1 minute then counter for previous reconnect attempts is reset to 0.
Must be an integer.
Default Value: 0.
Use this command to enable HTTP2 connection recovery parameters via closing connection.
Configures threading configuration for HTTP incoming request to PCF.
Exec > Global Configuration
advance-tuning http2-threading { disable-validation { false | true } | idle-thread-timeout-ms idle_thread_timeout | max-queue-capacity max_packet_capacity | max-thread-pool-size max_thread_pool_size | min-thread-pool-size min_thread_pool_size | request-timeout-ms request_timeout} Specify to enable or disable validation.
Must be one of the following:
false
true
Default Value: false.
Specify the thread idle timeout in milliseconds.
Must be an integer.
Default Value: 60000.
Specify the maximum packet capacity of the queue.
Must be an integer.
Default Value: 5000.
Specify the maximum size of pool of threads.
Must be an integer.
Default Value: 20.
Specify the minimum size of pool of threads.
Must be an integer.
Default Value: 5.
Use this command to configure threading configuration for HTTP incoming request to PCF.
advance-tuning http2-threading max-queue-capacity 500 Configures threading configuration for HTTP incoming request to PCF.
Exec > Global Configuration
advance-tuning overload-control Use this command to configure threading configuration for HTTP incoming request to PCF.
Configures Overload Control configuration for all Diameter interfaces.
Exec > Global Configuration
advance-tuning overload-control diameter global Use this command to configure Overload Control configuration for all Diameter traffic.
Configures the action to take on overload detection.
Exec > Global Configuration
action throttle-action throttle_action Specify the action to take when overload traffic is detected.
Must be one of the following:
DROP
REJECT
Use this command to configure the action that must be taken on overload detection.
Configures the limits for the overload handling parameters for the REST or Diameter interface.
Exec > Global Configuration
limits max-requests-per-sec maximum_requests Specify the maximum number of requests that are allowed per second before throttling is applied.
Must be an integer.
Use this command to configure the limits for overload handling parameters for the REST or Diameter interface.
Configures Overload Control configuration for all REST traffic.
Exec > Global Configuration
advance-tuning overload-control rest global Use this command to configure threading configuration for HTTP incoming request to PCF.
Configures the action to take on overload detection.
Exec > Global Configuration
action throttle-action throttle_action Specify the action to take when overload traffic is detected.
Must be one of the following:
DROP
REJECT
Use this command to configure the action that must be taken on overload detection.
Configures the limits for the overload handling parameters for the REST or Diameter interface.
Exec > Global Configuration
limits max-requests-per-sec maximum_requests Specify the maximum number of requests that are allowed per second before throttling is applied.
Must be an integer.
Use this command to configure the limits for overload handling parameters for the REST or Diameter interface.
Configures the REST endpoint.
Exec > Global Configuration
rest-endpoint { ips ip_address | port port_number | replicas replica_count | tracing-service-name service_name} Specify the alias name for the certificate.
Specify the maximum number of allowed inbound HTTPS connections.
Must be an integer.
Default Value: 200.
Specify the server side idle connection timeout period in seconds.
Must be an integer.
Default Value: 60.
Specify the timeout period for inbound requests in milliseconds.
Must be an integer.
Default Value: 2000.
Specify the IP addresses for the REST service.
Specify the timeout period for outbound requests in milliseconds.
Must be an integer.
Default Value: 200.
Specify port number of the REST service.
Must be an integer.
Specify the replica count.
Must be an integer.
Default Value: 1.
Specify to override the Helm repository.
Specify the tracing service name for REST endpoint.
Must be a string.
Specify the URI scheme.
Must be one of the following:
http
https
Default Value: http.
Specify the OAuth2 server enable or disable.
Default Value: false
Specify the OAuth2 client enable or disable.
Default Value: true
Use this command to configure the REST endpoint.
rest-endpoint tracing-service-name nPcf-pcf-rest-ep Displays certificate status.
Exec > Global Configuration
show certificate-status Displays the certificate name.
Must be a string.
Displays the time to expire.
Must be a string.
Use this command to view certificate status.
Displays the PCF discovered and cached NFs.
Exec > Global Configuration
show discovered-profiles Use this command to view the PCF discovered and cached NFs.
Displays PCF Discover cache for CHF.
Exec > Global Configuration
show discovered-profiles chf The expiration time in seconds.
Must be a string.
The NF IPv4 address.
Must be a string.
The NF Instance ID.
Must be a string.
Is the PCF instance registered to NRF.
Must be a string.
The NF type.
Must be a string.
The NF port number.
Use this command to view PCF Discover cache for CHF.
Displays PCF Discover cache for UDR.
Exec > Global Configuration
show discovered-profiles udr The expiration time in seconds.
Must be a string.
The NF IPv4 address.
Must be a string.
The NF Instance ID.
Must be a string.
Is the PCF instance registered to NRF.
Must be a string.
The NF type.
Must be a string.
The NF port number.
Use this command to view PCF Discover cache for UDR.
Configures the NF interfaces.
Exec > Global Configuration
rest-endpoint interface interface_type { ip ip_address | notify-update-retry-count notify_update_retry_count | outbound-request-timeout-ms outbound_request_timeout | port port_number} Specify the NF interface type.
Specify the NF interface IP address.
Specify the retry count for N7 NotifyUpdate outbound requests in case of timeout.
Must be an integer.
Default Value: 0.
Specify the timeout period for outbound requests in milliseconds.
Must be an integer.
Specify the port number for NF interface.
Must be an integer.
Use this command to configure NF interfaces.
rest-endpoint interface restEndpoint ip 11.11.11.11 Displays the NF's peer status.
Exec > Global Configuration
show peer-status Displays the NF connection uptime duration.
Must be a string.
Displays the PCF Discover cache for UDR.
Must be a string.
Displays the NF peer IP address.
Must be a string.
Displays the NF peer port number.
Must be a string.
Displays the PCF pod IP address.
Must be a string.
Use this command to view the NF's peer status.
Displays NRF registration details.
Exec > Global Configuration
show registration-status Displays the registered NRF URI.
Must be a string.
Displays the PCF pod ID.
Must be a string.
Displays whether Is PCF instance is registered to NRF.
Must be a string.
Use this command to view NRF registration details.
Configures the default engine group to receive traffic.
Exec > Global Configuration
traffic engine default-destination default_destination Specify the default engine group to receive the traffic.
Use this command to configure the default engine group to receive traffic. Note that a similar command is available for PCRF.
traffic engine default-destination /policy-test:engine/test-test1:group Configures traffic routing rule paramaeters.
Exec > Global Configuration
traffic engine rule rule_name { dnn dnn_route | supi supi_route | gpsi gpsi_route | hash-prefix hash_prefix_route | intf interface_route | destination engine_group} Specify the engine group to receive traffic.
Specify the route on DNN - regex.
Must be a string.
Specify the route on GPSI - regex.
Must be a string.
Specify the route on 2-digit hash - prefix.
Must be a string.
Specify the route on interface type - exact.
Must be a string.
Specify the route on SUPI - regex.
Must be a string.
Specify the rule name.
Must be a string.
Use this command to configure the traffic routing rule parameters.
Feedback