The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes how to configure and manage users, groups, and host access on the mobility services engine.
This chapter contains the following sections:
This section describes how to add, delete, and edit user groups.
User groups allow you to define and different access privileges to users.
To add a user group to a mobility services engine, follow these steps:
Step 1 In Cisco WCS, choose Services > Mobility Services.
Step 2 Click the name of the mobility services engine to which you want to add a user group.
Step 3 Choose System > Accounts > Groups (left).
Step 4 Select Add Group from the Select a command drop-down menu and click Go.
Step 5 Enter the name of the group in the Group Name field.
Step 6 Select a permission level (read, write, or full) from the Permission drop-down menu.
Note Full Access is required for Cisco WCS to access mobility services engines.
Step 7 Click Save.
To delete user groups from a mobility services engine, follow these steps:
Step 1 In Cisco WCS, choose Services > Mobility Services.
Step 2 Click the name of the mobility services engine from which you want to delete a user group.
Step 3 Choose System > Accounts > Groups (left).
Step 4 Check the check boxes of the groups that you want to delete.
Step 5 Select Delete Group from the Select a command drop-down menu and click Go.
Step 6 Click OK.
To change user group permissions, follow these steps:
Step 1 In Cisco WCS, choose Services > Mobility Services.
Step 2 Click the name of the mobility services engine you want to edit.
Step 3 Choose System > Accounts > Groups (left).
Step 4 Click the name of the group you want to edit.
Step 5 Select a permission level (read, write, or full) from the Permission drop-down menu.
Step 6 Click Save.
This section describes how to add, delete, and edit users to a mobility services engine. It also describes how to view active user sessions.
To add a users to a mobility services engine, follow these steps:
Step 1 In Cisco WCS, choose Services > Mobility Services.
Step 2 Click the name of the mobility services engine to which you want to add users.
Step 3 Choose System > Accounts > Users (left).
Step 4 Select Add User from the Select a command drop-down menu and click Go.
Step 5 Enter the username in the Username field.
Step 6 Enter a password in the Password field.
Step 7 Enter the name of the group to which the user belongs in the Group Name field.
Step 8 Select a permission level (read, write, or full) from the Permission drop-down menu.
Note Full Access is required for Cisco WCS to access mobility services engines.
Step 9 Click Save.
To delete a user from a mobility services engine, follow these steps:
Step 1 In Cisco WCS, choose Services > Mobility Services.
Step 2 Click the name of the mobility services engine from which you want to delete a user.
Step 3 Choose System > Accounts > Users (left).
Step 4 Check the check boxes of the users that you want to delete.
Step 5 Select Delete User from the Select a command drop-down menu and click Go.
Step 6 Click OK.
To change user properties, follow these steps:
Step 1 In Cisco WCS, choose Services > Mobility Services.
Step 2 Click the name of the mobility services engine you want to edit.
Step 3 Choose System > Accounts > Users (left).
Step 4 Click the name of the group that you want to edit.
Step 5 Make the required changes to the Password, Group Name, and Permission fields.
Step 6 Click Save.