connectorctl -s local-firehose macdebug viewdebuglogs
This command displays the mac debug logs on the Cisco Spaces: Connector configured using the connectorctl -s local-firehose macdebug enable command
connectorctl -s local-firehose macdebug viewdebuglogs -m macaddress
Syntax Description
Keywords and Variables | Description |
---|---|
-m macaddress |
MAC address of the Radio Frequency Identification (RFID) tag or the Bluetooth Low Energy (BLE) tag that should be debugged. |
Examples
The following is a sample output of the command:[spacesadmin@connector ~]$ connectorctl -s local-firehose macdebug viewdebuglogs -m 00:0c:cc:45:f0:b3
Executing command:macdebug
Command execution status:Success
-----------------------
2023-10-05 02:42:03,434 [pool-21-thread-1] INFO com.cisco.dnaspaces.firehose.Firehose - MAC_DEBUG: 00:0c:cc:45:f0:b3, Incoming data from Connector, type: TAG_RSSI, message: tenantId: "11564"
macAddress: "00:0c:cc:45:f0:b3"
controllerIpAddress: "10.22.244.173"
messageId: 15
measurementNotification {
tenantId: "11564"
tenantId: "11564"
macAddress: "00:0c:cc:45:f0:b3"
controllerIpAddress: "10.22.244.173"
deviceCategory {
deviceClass: TAGS_2
}
transmitPower {
value: 19
}
apRssiMeasurements {
entries {
apMacAddress: "68:7d:b4:5f:26:c0"
rssi: -42
timestamp: 50185
}
entries {
apMacAddress: "ec:f4:0c:0e:9e:e0"
rssi: -47
timestamp: 54185
}
entries {
apMacAddress: "10:f9:20:fe:5e:a0"
rssi: -50
timestamp: 50185
}
entries {
apMacAddress: "0c:d0:f8:95:f3:80"
rssi: -51
timestamp: 49185
}
maxEntry {
apMacAddress: "68:7d:b4:5f:26:c0"
rssi: -42
timestamp: 50185
}
}
ccxTagPayloadList {
timestamp: 49185
sequenceNumber: 2426
data: "\000\023\v\006\002\000\002\0003\002\a\n\000f\000\000\001\275\003\005\001A\302@\000\004\a\000\f\314\000\000\017\000"
}
serviceDescriptor {
serviceId: RSSI
serviceMask: 2
}
}
sourceTimestamp: 1696473723296
Command History
Release 3 |
This command is introduced. |