AAA Server
Group Configuration Mode
|
radius attribute
nas-ip-address address
ip_address
nexthop-forwarding-address
ip_address
vlan
vlan_id
|
Sets the
RADIUS client to provide the VLAN ID with the nexthop forwarding address to a
system when running in single nexthop gateway mode.
Note: To access the
vlan
keyword,
aaa-large
configuration must be enabled via the Global Configuration mode.
|
ACS Charging
Action Configuration Mode
|
ip vlan
vlan_id
|
Configures
the VLAN identifier to be associated with the subscriber traffic in the
destination context.
|
Context
Configuration Mode
|
ip pool
pool_name
nexthop
forwarding address
ip_address
overlap
vlanid
vlan_id
|
When a
nexthop forwarding address is configured, the
overlap
vlanid keyword enables support for overlapping IP address pools and
associates the pool with the specified VLAN ID.
|
Context
Configuration Mode
|
ip routing overlap-pool
|
Advertises
overlap-pool addresses in dynamic routing protocols when overlap pools are
configured using VLAN IDs. When enabled, the overlap addresses are added as
interface addresses and advertised.
|
Context
Configuration Mode
|
radius attribute
nas-ip-address address
ip_address
nexthop-forwarding-address ip_address
vlan
vlan_id
|
Specifies
the VLAN ID to be associated with the next-hop IP address.
|
Ethernet
Interface Configuration Mode
|
[no]
logical-port-statistics
|
Enables or
disables the collection of logical port (VLAN and NPU) bulk statistics for the
first 32 configured Ethernet or PVC interface types.
|
Ethernet
Interface Configuration Mode
|
vlan-map next-hop
ipv4_address
|
Sets a
single next-hop IP address so that multiple VLANs can use a single next-hop
gateway. The vlan-map is associated with a specific interface.
|
Ethernet
Port Configuration Mode
|
vlan
vlan_id
|
Enters VLAN
Configuration mode.
|
PVC
Configuration Mode
|
[no] shutdown
|
Enables or
disables traffic over a specified VLAN. See below.
|
Subscriber
Configuration Mode
|
ip vlan
vlan_id
|
Configures
the subscriber VLAN ID that is used with the assigned address for the
subscriber session to receive packets. If the IP pool from which the address is
assigned is configured with a VLAN ID, this subscriber configured VLAN ID
overrides it.
|
VLAN
Configuration Mode
|
bind interface
interface_name context_name
|
Binds a
virtual interface and context to support VLAN service.
|
VLAN
Configuration Mode
|
[no] ingress-mode
|
Enables or
disables port ingress incoming) mode.
|
VLAN
Configuration Mode
|
priority
value
|
Configures
an 802.1p VLAN priority bit for ASN-GW service only.
|
VLAN
Configuration Mode
|
[no] shutdown
|
Enables or
disables traffic over the current VLAN.
|
VLAN
Configuration Mode
|
vlan-map interface
if_name
context_name
|
Associates
an IP interface having a VLAN ID with a context.
|