threshold poll packets-filtered-dropped interval
Configures the polling interval over which to count the filtered/dropped packets.
Security Administrator, Administrator
Exec > Global Configuration
Entering the above command sequence results in the following prompt:
threshold poll packets-filtered-dropped interval duration
Default: 300 seconds.
Specifies the amount of time (in seconds) that comprises the polling interval.
duration must be an integer from 30 through 60000.
This command sets the time period over which to monitor the specified value for threshold crossing.
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a polling interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the threshold monitoring and other threshold commands for additional information on the system's support for thresholds in this chapter.
To enable an SNMP trap for monitoring this threshold use the snmp trap enable ThreshPacketsFilteredDropped command in this mode.
threshold poll packets-filtered-dropped interval 600