Overbuild
|
New
chapter added describing the Overbuild tools in the Managed Services feature
|
September 2015
|
Command Builders Overview
|
Introduction to building a repository of IOS commands
|
September 2015
|
LBO and Analog Gateway Configuration and Generated Events
|
Reference table of configuration actions and the LBO events that
are generated
|
September 2015
|
Local Break Out and Analog Gateway Events, IOS Commands, and Variables
|
Reference table of LBO events, default IOS commands, available
variables and note
|
September 2015
|
Translation Rule Numbering
|
Information on decoding the number of Translation Rules included
in IOS Command Builders
|
September 2015
|
Set up a Command Builder
|
Procedure to set up a Command Builder that contains an IOS
Commands template for an event
|
September 2015
|
Clone a Command Builder
|
Procedure to clone a Command Builder that contains an IOS
Commands template for an event
|
September 2015
|
Set up an IOS Device
|
Adding
and configuring an IOS device
|
September 2015
|
Set up SIP Local Gateway
|
Adding
and configuring a logical gateway running on a physical IOS device
|
September 2015
|
Update a SIP Local Gateway
|
Procedure to update a SIP local gateway
|
September 2015
|
Delete a SIP Local Gateway
|
Procedure to delete a SIP local gateway
|
September 2015
|
Associate a SIP Local Gateway to a Site
|
Procedure to associate a SIP Local Gateway with a site
|
September 2015
|
Disassociate a SIP Local Gateway from a Site
|
Procedure to remove a SIP Local Gateway's association to a site
|
September 2015
|
View IOS Commands Log
|
Generate a list of command sets that were triggered by different
events on the IOS device
|
September 2015
|
Consolidate IOS Commands
|
Make
copying IOS commands to an IOS device CLI easier by consolidating commands
generated by multiple events
|
September 2015
|
Regenerate IOS Commands
|
Procedure to regenerate IOS commands with the latest
configuration
|
September 2015
|
Associate a Set of E.164 Numbers to One Directory Number
|
Added
Primary E164 field, and added LBO event to the Results section
|
September 2015
|
Associate a Range of E.164 Numbers to a Range of Directory Numbers
|
Added
LBO event to the Results section
Added
note to Step 5 table to disallow DN numbers that start with * prefix
|
September 2015
|
Disassociate a Set of E.164 Numbers from a Directory Number
|
Added
LBO event to the Results section
|
September 2015
|
Disassociate a Range of E.164 Numbers from a Range of Directory Numbers
|
Added
LBO event to the Results section
|
September 2015
|
Associate Pilot Number to a Site
|
Added
LBO event to the Results section
|
September 2015
|
Disassociate Pilot Number from a Site
|
Added
LBO event to the Results section
|
September 2015
|
Set up Customer Equipment
|
Procedure to associate customer equipment with the Prime
Collaboration application that monitors it
|
September 2015
|
Prime Collaboration Assurance Integration with Cisco Unified Communications Domain Manager 10.6(2)
|
Workflow to enable integration between
Cisco Unified
Communications Domain Manager 10.6(2) and Prime Collaboration Assurance
|
September 2015
|
Analog Gateways
|
Description of an analog gateway
|
September 2015
|
Set up an Analog Gateway
|
Procedure to add and configure an analog gateway
|
September 2015
|
Create a Custom Self-Service Role
|
Procedure to modify the default Self-Service feature display
policy, create a custom Self-Service role, and assign the custom Self-Service
role to users
|
September 2015
|
Create a Customer
|
Added
note about migrating existing customer from sys.hcs
|
September 2015
|
Create a Provider
|
Added
note about migrating existing service provider
|
September 2015
|
Create a Reseller
|
Added
note about migrating OrgUnit
|
September 2015
|
Create a Site
|
Added
note about migrating existing customer location from sys.hcs
|
September 2015
|
Define a Voice Mail Pilot Number
|
Added
site to step 2, and DN inventory information to step 6
|
September 2015
|
Associate Pilot Number to a Site
|
Added
E164 pulldown
|
September 2015
|
Add Directory Number Inventory
|
Added
info about * prefix in Step 5
|
September 2015
|
View Directory Number Inventory
|
Added
info about * prefix in Step 3
|
September 2015
|
Cluster Failure Scenarios
|
Added tables for single and multiple unified node failure
scenarios
|
September 2015
|