New and Changed Information

New and Changed Information for Firmware Release 11.2(3)SR1

Revision

New and Changed

Added a new task to support Activation Code Onboarding

Activation Code Onboarding

New and Changed for Firmware Release 11.2(3)

Revisions

New and Changed Sections

Added Catalan to the supported language list Supported Languages for the Phone Display
Updated the --key keyword details and added a note about RFC 8188-based encryption.

Report Current Phone Configuration to the Provisioning Server

Added a new task on how to enable early media support

Enable P-Early-Media Support

Added topics replacing the "Set up Profile Account" topic to support the enhancements in profile authentication

Profile Authentication

Specify the Profile Authentication Type

Added new fields and topics to support the feature of DND and call forwarding status sync

DND and Call Forwarding Status Sync

Enable Feature Key Sync

Enable Call Forwarding Status Sync via XSI Service

Enable DND Status Sync via XSI Service

XSI Line Service

Added a new topic replacing the existing Busy Lamp Field Configuration on a Monitoring Phone.

Phone Configuration for Monitoring Other Phones

Added a new task on how to phone users to configure speed dial and monitor a coworker's line.

Enable Users to Configure Features on Line Keys

Added a new topic about including a device identifier in uploaded syslog messages.

Include a Device Identifier in Uploaded Syslog Messages

Added new fields and a new task on how to remotely report phone problems.

Report a Phone Problem Remotely

PRT Status

Added the Syslog Identifier field.

Optional Network Configuration

Replaced the Profile Account Enable parameter with the Profile Authentication Type field

Updated the description of the Profile Rule parameter.

Configuration Profile

Updated Report Rule and added new parameters: Report to Server, periodic Upload to Server, and Upload Delay on Local Change.

Upload Configuration Options

Updated the description for the Extension field.

Line Key

Updated the description of the First Name Filter and Last Name Filter fields.

LDAP

Example XML parameter configuration is added for the Line Enable parameter.

Voice > Ext (n) > General

Added a new task on how to assign the new MPP key expansion modules—Cisco IP Phone 8851/8861 Key Expansion Module and Cisco IP Phone 8865 Key Expansion Module

Allocate a Key Expansion Module Type

Allocate a Key Expansion Module Type with the Phone Menu

Added a new field in the General table to support the new parameter" KEM Type" that is added to the phone web page

General

Added a troubleshooting scenario for new MPP key expansion modules—Cisco IP Phone 8851/8861 Key Expansion Module and Cisco IP Phone 8865 Key Expansion Module

Key Expansion Module Does Not Go Through the Normal Start Up Process

Add new task to support Wi-Fi management and Wi-Fi profile

Turn the Wi-Fi On or Off from the Phone Web Page

Set Up a Wi-Fi Profile from the Phone Web Page and the XML Provisioning Server

Added a new table to support the new parameter Wi-Fi Settings that is added to the phone web page

Wi-Fi Settings

Added a new table to support the new parameter Wi-Fi Profile (n) that is added to the phone web page

Wi-Fi Profile (n)

Added a topic of Cisco Headset 500 Series customization

Cisco Headset 500 Series Customization

Added topics to support Cisco Headset 521, 522, 561, and 562

Accessories Overview for Cisco IP Phone 8800 Series with Multiplatform Firmware

Cisco Headset 521 and 522

Cisco Headset 561 and 562

Added a topic for upgrading Cisco Headset 500 Series

Set the Upgrade Rule for the Cisco Headset 500 Series

New and Changed for Firmware Release 11.2(1)

Revisions

New or Changed Sections

Updated the topics to support LCD screen does not honor "ro" and "na" attribute

Enable User Access to the Phone Interface Menus

System Configuration

Added a new topic to support NAPTR

Configure the SIP Transport

Updated the topics to support NAPTR

Telephony Features for Cisco IP Phone

SIP Settings

Added a new topic to support SIP privacy header

Configure a Privacy Header.

Updated the topic to support SIP privacy header

SIP Settings

Added a new topic to support blocking of SIP message from a non-proxy device

Block Non-Proxy SIP Messages to a Phone

Updated the topic to support blocking of SIP message from a non-proxy device

System Configuration

Added a new topic to support Peer Firmware Sharing

Peer Firmware Sharing

Enable Peer Firmware Sharing

Updated the topic to support Peer Firmware Sharing

Telephony Features for Cisco IP Phone

Firmware Upgrade

Added a new topic to support profile account

Enable Profile Account

Updated the topic to support profile account

Configuration Profile

Updated the topic to support DND and call forward indication for non-selected line with feature key sync support

Enable Synchronization of Settings Between the Phone and the Server

Added new topic to support call silence

Add Ignore Programmable Soft Key to Silence an Incoming Call

Updated the topics to support call silence

Programmable Softkeys

Telephony Features for Cisco IP Phone

Added new topics to support XSI BroadWorks Anywhere

Enable BroadWorks Anywhere

XSI Line Service

Added new topics to support XSI caller ID blocking

Sync the Block Caller ID Feature with the Phone and the BroadWords XSI Server

XSI Line Service

Added new topics to support XSI call logs

Enable Viewing BroadWorks XSI Call Logs on a Line

Updated the topics to support XSI call logs

XSI Phone Service

Telephony Features for Cisco IP Phone

Updated the topic to support screen saver type "lock" removal

Configure the Screen Saver with the Phone Web Page

Added new section to support Executive-Assistant

Executives and Assistants

Executive or Assistant Menu Does Not Appear

Updated topics to support Executive-Assistant

Digit Sequence Examples

Edit the Dial Plan on the IP Phone

Enable Synchronization of Settings Between the Phone and the Server

Programmable Softkeys

Telephony Features for Cisco IP Phone

Programmable Softkeys

Line Key

Vertical Service Activation Codes

Feature Buttons and Softkeys

Call Feature Settings

Updated the topic to support video packetization

Configure the Video Codec

Added a new topic to support Video RTP ToS(Voice/Video data priorities)

Configure Priorities for Voice and Video Data

Updated topics to support Video RTP ToS(Voice/Video data priorities)

Telephony Features for Cisco IP Phone

Network Settings

Added a new topic to support Audio Settings (Acoustic)

Acoustic Settings

Configure Acoustic Settings

Updated topics to support Audio Settings (Acoustic)

Telephony Features for Cisco IP Phone

New and Changed for Firmware Release 11.1(2)

Feature

New or Changed Sections

Control the Look Up of Caller Names for Incoming and Outgoing Calls

Reverse Name Lookup for Incoming and Outgoing Calls

Enable and Disable Reverse Name Lookup

Cisco Headset 531 and Cisco Headset 532

Important Headset Safety Information

Third Party Headsets

Headset Configuration on Your Phone

Make Emergency Calls

Emergency Call Support Background

Configure a Phone to Make Emergency Calls

E911 Geolocation Configuration

An Emergency Call Doesn't Connect to Emergency Services

LDAP over TLS (LDAPS).

Configure LDAP over TLS

DHCP VLAN options.

Set Up DHCP VLAN Option from Phone Web Page

VLAN Settings

Network Configuration Fields

HTTPS support for XSI Services.

XSI Phone Service

Phone Cannot Access BroadSoft Directory for XSI

New and Changed for Firmware Release 11.1(1)

Feature

New or Changed Sections

Asian Language Support

Phone Display Language

Phone Display Problems

The Font is Too Small or Has Unusual Characters

Phone Screen Displays Boxes Instead of Asian Characters

Phone Locale is Not Displayed

Softkey Labels are Truncated

Call Center Support

Set Up a Call Center Agent Phone

ACD Call Information Missing

ACD Settings

Phone Doesn't Show ACD Softkeys

Call Recording

Enable Remote Call Recording with SIP REC

Enable Remote Call Recording with SIP INFO

Call Doesn't Record

Cisco IP Phone 8845 and 8865 Support

Configure the Video Codec

Video Configuration

Video Transmit Resolution Setup

Control the Video Bandwidth

Video Configuration

Disable Video Services

Video Configuration

Factory Reset Button in the Phone Web Page

Factory Reset the Phone with the Web UI Button

Factory Reset

IPv6 Support

Network Configuration Fields

IPv6 Information

Network Settings

IPv6 Settings

Presence

Set Up a Phone for Presence

Broadsoft XMPP

Phone Presence Message: Disconnected from Server

Presence Status Doesn't Work

New and Changed Features for Firmware Release 11.0(1)

All new features have been added to Telephony Features for Cisco IP Phone.

Revision

Updated Section

Added MOS enhancement

See MOS-LQ and MOS-CQ values in Line Call Status

Added how to confgure missed call indication on the Configuration Utility Page

Supplementary Services

Configure Missed Call Indication with the Configuration Utility

Added factory reset and pinging in phone web page with a specific URL

Factory Reset the Phone from Phone Web Page

Identify Phone Issues with a URL in the Phone Web Page

Added information on a star code is added to Conference hard key from the phone web page

Enable Conference Button with a Star Code

Logo can be added as boot display Add a Logo as the Boot Display

Key expansion modue will be auto-detected when plugged in

Auto Detection of Key Expansion Modules

New and Changed Features for Firmware Release 11(0)

All new features have been added to Telephony Features for Cisco IP Phone.

Revision

Updated Section

Added Configure PRT Upload URL

Configure PRT Upload

Added Problem Report tool enhancements

Added Problem Report tool uplaod

Configure PRT Upload

Added enabling dial assistance

Enable Dial Assistance

Added extra line keys support

Set up Extra Line Keys

Updated basic calls enhancements

Updated web https enhancements

Enable Access to Phone Web Interface

System Configuration

Added Call Forwarding support on Voice tab and User tab

Call Forward

Added support for XML applications

XML Services

XML Directory Service

XML Applications

Macro Variables

Configure a Phone to Connect to an XML Application

Configure a Phone to Connect to an XML Directory Service

Added support for Hoteling

Enable Hoteling on a Phone

Added DND and Call Forward synchronization

Enable Synchronization of Settings Between the Phone and the Server

Added ability to set password on Confiugration Utility

Set the User Password

Added TR-069 support

Manage Phones with TR-069

TR-069

TR-069 Status

Updated Dial Plan fields

Dial Plan

Added support for 802.x

802.1X Authentication

Added Bluetooth wireless headset enhancement

Bluetooth Wireless Headsets

Added shared line enhancement

Shared Lines

Configure a Shared Line

Added enabling NAT

Enable NAT Mapping

Added LDAP enhancement

LDAP

Added configure speed dial

Configure a Speed Dial with the Configuration Utility Page

Added enabling electronic hookswitch on Configuration Utility

Enable Electronic Hookswitch

Audio Volume

Updated Speed Dial topic

Speed Dial

Added call park, BLF display label, and LCD brightness configuration on Key Expansion Module

Updated modified speed dial support on key expansion module

Configure a Speed Dial on a Key Expansion Module

Added viewing customization state

View the Customization State in the Configuration Utility

Added configuring BLF with additional multiple features

Added star code support on Do Not Disturb feature

Configure Star Codes for DND

Updated programmable softkeys changes

Updated provisoning authority changes

Configure Provisioning Authority

Updated Do Not Disturb feature changes

Enable Do Not Disturb

Added Automatic paging feature

Updated all sections of Phone Configuration Utility (Web page)