Introduction

These release notes support the Cisco Unified IP Phones 8961, 9951, and 9971 running Firmware Release 9.4(2)SR2.

The following table lists the Cisco Unified Communications Manager release and protocol compatibility for the Cisco Unified IP Phones.

Cisco Unified IP Phone

Protocol

Cisco Unified Communications Manager

Cisco Unified IP Phones 8961, 9951, and 9971

SIP

Cisco Unified Communications Manager Release 7.1(5) and later


Note

Some features in this release may require a specific version of Cisco Unified Communications Manager. The feature description identifies if the feature requires a different version of Cisco Unified Communications Manager from the version identified in the above table.


Related Documentation

Use the following sections to obtain related information.

New and Changed Features

This release contains no new or changed features.

Installation

Upgrade Notes

Direct upgrades, using signed load files, are supported from 9.x to Firmware Release 9.4(2)SR2. You can use the following firmware release file for these direct upgrades.

  • For Cisco Unified IP Phone 9951, 9971, and 8961:

    • cmterm-8961.9-4-2SR2-2.k3.cop.sgn

    • cmterm-9951.9-4-2SR2-2.k3.cop.sgn

    • cmterm-9971.9-4-2SR2-2.k3.cop.sgn

Install the Firmware Release on Cisco Unified Communications Manager

Before using the Cisco Unified IP Phone Firmware Release 9.4(2)SR2 with Cisco Unified Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.

Procedure


Step 1

Go to the following URL:

Step 2

Depending on your phone model, choose Cisco Unified IP Phones 8900 Series or Cisco Unified IP Phones 9900 Series.

Step 3

Choose your phone type.

Step 4

Choose Session Initiation Protocol (SIP) Software.

Step 5

In the Latest Releases folder, choose 9.4(2)SR2.

Step 6

Select one of the following firmware files, click the Download or Add to cart button, and follow the prompts:

  • cmterm-8961.9-4-2SR2-2.k3.cop.sgn

  • cmterm-9951.9-4-2SR2-2.k3.cop.sgn

  • cmterm-9971.9-4-2SR2-2.k3.cop.sgn

Note 

If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file.

Step 7

Click the + next to the firmware file name in the Download Cart section to access additional information about this file. The hyperlink for the readme file is in the Additional Information section, which contains installation instructions for the corresponding firmware:

  • cmterm- 8961.9-4-2SR2-2-readme.html

  • cmterm- 9951.9-4-2SR2-2-readme.html

  • cmterm- 9971.9-4-2SR2-2-readme.html

Step 8

Follow the instructions in the readme file to install the firmware.


Install the Firmware Zip Files

If a Cisco Unified Communications Manager is not available to load the installer program, the following .zip files are available to load the firmware.

  • cmterm- 8961.9-4-2SR2-2_REL.zip

  • cmterm- 9951.9-4-2SR2-2_REL.zip

  • cmterm- 9971.9-4-2SR2-2_REL.zip

Firmware upgrades over the WLAN interface may take longer than upgrades using a wired connection. Upgrade times over the WLAN interface may take more than an hour, depending on the quality and bandwidth of the wireless connection.

Procedure


Step 1

Go to the following URL:

Step 2

Depending on your phone model, choose Cisco Unified IP Phones 8900 Series or Cisco Unified IP Phones 9900 Series.

Step 3

Choose your phone type.

Step 4

Choose Session Initiation Protocol (SIP) Software.

Step 5

In the Latest Releases folder, choose 9.4(2)SR2.

Step 6

Download the relevant zip files.

Step 7

Unzip the files.

Step 8

Manually copy the unzipped files to the directory on the TFTP server. See Cisco Unified Communications Operating System Administration Guide for information about how to manually copy the firmware files to the server.


Limitations and Restrictions

DTMF During On-Hook Dialing

On-hook dialing can result in users hearing the DTMF from the key press in the handset. The tones are heard if the handset is picked up while the last digit is pressed. If users pick up the handset after pressing the last digit, they will normally not hear any DTMF.

Voice VLAN and IPv6 Limitation

If the PC attached to the PC port of the phone is using IPv6, we recommend that the PC Voice LAN access be disabled. This ensures that the PC cannot connect to the Voice VLAN.

Phone Limitation During SVI Change

Cisco IP Phones use a Switch Virtual Interface (SVI) to manage VLANs. If the SVI changes and the phones require new IP addresses, some phones require a reboot so that the new IP address is used. The following phones must be rebooted in this condition:

  • Cisco Unified IP Phone 6901

  • Cisco Unified IP Phone 6911

  • Cisco Unified IP Phone 6921

  • Cisco Unified IP Phone 6941

  • Cisco Unified IP Phone 6945

  • Cisco Unified IP Phone 6961

  • Cisco Unified IP Phone 8941

  • Cisco Unified IP Phone 8945

  • Cisco Unified IP Phone 8961

  • Cisco Unified IP Phone 9951

  • Cisco Unified IP Phone 9971

Phone Behavior During Times of Network Congestion

  • Administrative tasks, such as an internal port scan or security scan

  • Attacks that occur on your network, such as a Denial of Service attack

On-Hook Transfer Limitation in SIP Phones

When the Cisco Unified Communications Manager Transfer On-Hook Enabled field is enabled, users might report a problem with direct call transfer in SIP phones. If the user transfers the call and immediately goes on hook before they hear the ring signal, the call may drop instead of being transferred.

The user needs to hear the ring signal so that they can be sure that the call is being routed.

Called Party Name Display Limitation in ICT or H323 Calls

For ICT or H323 calls, the details of the called party are not stored in the call history after the call is completed. This issue is observed in phones running on Cisco Unified Communications Manager Release 11.5 or later. The workaround for this issue is to use a SIP trunk instead of an H323 trunk.

Since Cisco Unified Communications Manager Release 11.5 sends x-cisco-original-called tag, the phone takes its display name from that tag. If the name is missing, the Call History displays Unknown.

Caveats

This section describes the resolved and open caveats, and provides information on accessing the Cisco Software Bug Toolkit.

Access Cisco Bug Search

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of the following:

  • All severity level 1 or 2 bugs

  • Significant severity level 3 bugs

You can search for problems by using Cisco Bug Search.

Before you begin

To access Cisco Bug Search, you need the following items:

  • Internet connection

  • Web browser

  • Cisco.com user ID and password

Procedure


Step 1

To access Cisco Bug Search, go to:

Step 2

Log in with your Cisco.com user ID and password.

Step 3

To look for information about a specific problem, enter the bug ID number in the Search for field, then press Enter.


Open Caveats

The following table lists severity 1, 2, and 3 defects that are open for the Cisco Unified IP Phones 8961, 9951, and 9971 for Firmware Release 9.4(2)SR2.

For more information about an individual defect, access the Bug Search toolkit and search for the defect using the Identifier. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, the table reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in Access Cisco Bug Search.

Table 1. Open Caveats for Firmware Release 9.4(2)SR2
Identifier Description

CSCuh59516

USB Headset: Adjust volume for active call can't be work

CSCup92089

connection refused, when we try to do ssh to the 9951/9971/8961 phone

CSCuq22092

Phone UI stuck when resetting

CSCuq23382

9971 lost connection with the server

CSCuq25819

Phone reports buffer error during SSH connection

CSCuq32312

Called name of mullti-leg info logged in remote call log are incorrect

CSCuq32376

9971 got freeze

CSCuq34821

The archived logs on 9971 phone web are not correctly

CSCuq36933

the dialing UI is always viewed until user close it

CSCuq41003

Alpha 9971 UI freeze issue

CSCuq49498

Phone reset after logoff VXC tunnel from ASA

CSCuq65279

UI freeze after network is switched to Ethernet

CSCuq65326

Phone reset during actions on menu

CSCuq69052

The volume heard in BT headset doesn't increase or decrease averagely

CSCuq69071

A 9951/9971/8961 volume change issue with BT headset

CSCuq76053

Phone didn't connect to Unity if press "#" after password inputted

CSCuq80204

Phone reset during stress test

CSCuq82776

Cannot initiate conference after hold key is pressed rapidly

CSCuq85180

CLI: Conference call on SRST will have the call state: CONF

CSCuq87055

UI freeze during reset on phone

CSCuq87089

A grey square remains after actionable alert disappear

CSCuq89182

Session bubble not be completely cleared during stress test

CSCuq91838

default account is not disabled on phone

CSCuq95910

No number displayed on call bubble in remote status

CSCuq95956

cli:show ui window detail ToastWidget-x return incomplete text

CSCuq96017

A 9971 exited the conference automaically

CSCuq97823

The volume on 99xx is differernt when BT headset is connected or not

CSCur03773

INTERNAL Ref value changes along with the call states(Ringing/connected)

CSCur06412

99xx 9-4-1-9 phone load CLI output not proper - xfer and abdial scenarios

CSCur30371

Intermittently no video when 9971 using Jabber as video head

CSCur47590

Cannot conference in a remote shared line

CSCur65440

99XX IPPhone needs to escape space in GET request for RFC2616 compliance

CSCur69358

Can't display application window only display soft keys

CSCur70698

Intermittently no video when 9971 using Jabber as video head

Resolved Caveats

The following table lists severity 1, 2, and 3 defects that are resolved for the Cisco Unified IP Phones 8961, 9951, and 9971 for Firmware Release 9.4(2)SR2.

For more information about an individual defect, access the Bug Search toolkit and search for the defect using the Identifier. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, the table reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in Access Cisco Bug Search.

Table 2. Resolved Caveats for Firmware Release 9.4(2)SR2
Identifier Description

CSCum48267

OpenSSL bn Denial of Service Vulnerability

CSCum48417

OpenSSL ssl_get_algorithm2 Function Request Processing Denial of Service

CSCuo28644

Allegro RomPager HTTP Referer Header XSS

CSCup92977

Remove unneeded tools from production image

CSCuq60436

Multiple Vulnerabilities in OpenSSL - August 2014

CSCur49810

No tar log file on 8961 web page

CSCur65378

8961 with no DN assigned to Primary line /mnt/flash partition increases

CSCur70698 

Screenshots very slow on 9971 model

CSCus08053

9971 phones have clipping garbled audio while using speakerphone

CSCus17021 

99 packets are dropped and one way audio for a few seconds at 22 minutes

CSCus31274

Oct 2014 OpenSSL Vulnerabilities

CSCus33551

9951/9971/8961 POODLE vulnerability evaluation - CVE-2014-3566

CSCus42706

JANUARY 2015 OpenSSL Vulnerabilities

CSCus53052 

No BLF audible Alert for 9951

CSCus70298 

Evaluation of CVE-2015-0235 'GHOST' vulnerability

CSCus76452 

Deskphone Video Intermittenly not Working with 9.4.2 Firmware on 8961

CSCus85117 

8961 Phone sees an active call when no call is active

CSCus87564 

9971 does not tag voice packets to wireless AP

CSCut29519

99XX does not use TTL parameter for backup DNS server

CSCut31766

9971 breaks audio during call with jabber control

CSCut35079 

phone unregister n never register back when we run nessus port scanner

CSCut46169 

MARCH 2015 OpenSSL Vulnerabilities

CSCut70074 

9951 may not re-register after receiving a NOTIFY w/restart or reset

CSCuv10117 

Phone closes TCP connection when displaying image

CSCuv28931

9971/9951/8961 image command can run in non-root permission

Cisco Unified Communication Manager Public Keys

To improve software integrity protection, new public keys are used to sign cop files for Cisco Unified Communications Manager Release 10.0.1 and later. These cop files have "k3" in their name. To install a k3 cop file on a pre-10.0.1 Cisco Unified Communications Manager, consult the README for the ciscocm.version3-keys.cop.sgn to determine if this additional cop file must first be installed on your specific Cisco Unified Communications Manager version. If these keys are not present and are required, you will see the error "The selected file is not valid" when you try to install the software package.

Unified Communications Manager Endpoints Locale Installer

By default, Cisco IP Phones are set up for the English (United States) locale. To use the Cisco IP Phones in other locales, you must install the locale-specific version of the Unified Communications Manager Endpoints Locale Installer on every Cisco Unified Communications Manager server in the cluster. The Locale Installer installs the latest translated text for the phone user interface and country-specific phone tones on your system so that they are available for the Cisco IP Phones.

To access the Locale Installer required for a release, access https://software.cisco.com/download/navigator.html?mdfid=286037605&flowid=46245, navigate to your phone model, and select the Unified Communications Manager Endpoints Locale Installer link.

For more information, see the documentation for your particular Cisco Unified Communications Manager release.


Note

The latest Locale Installer may not be immediately available; continue to check the website for updates.


Cisco IP Phone Documentation Updates on Cisco Unified Communications Manager

The Cisco Unified Communications Manager Self Care Portal (Release 10.0 and later) and User Options web pages (Release 9.1 and earlier) provide links to the IP Phone user guides in PDF format. These user guides are stored on the Cisco Unified Communications Manager and are up to date when the Cisco Unified Communications Manager release is first made available to customers.

After a Cisco Unified Communications Manager release, subsequent updates to the user guides appear only on the Cisco website. The phone firmware release notes contain the applicable documentation URLs. In the web pages, updated documents display "Updated" beside the document link.


Note

The Cisco Unified Communications Manager Device Packages and the Unified Communications Manager Endpoints Locale Installer do not update the English user guides on the Cisco Unified Communications Manager.


You and your users should check the Cisco website for updated user guides and download the PDF files. You can also make the files available to your users on your company website.


Tip

You may want to bookmark the web pages for the phone models that are deployed in your company and send these URLs to your users.


Documentation, Service Requests, and Additional Information

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.