Prime Collaboration Provisioning Guide for Cisco Business Edition6000, Release 12.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Prime Collaboration Provisioning Guide for Cisco Business Edition6000, Release 12.x

Chapter Title

Installation

Results

Updated:
April 2, 2018

Chapter: Installation

Installation

Virtual Appliance Installation

To deploy and install the Prime Collaboration Provisioning virtual machine, see the Installation Guide for Cisco Business Edition 6000:

http:/​/​www.cisco.com/​en/​US/​partner/​products/​ps11369/​prod_​installation_​guides_​list.html

The complete installation time for the Prime Collaboration Provisioning application is approximately 30 minutes.

Activate Services

For Cisco Prime Collaboration Provisioning to interact with Cisco Unified Communications Manager and IM and Presence Service servers, you must activate the Cisco AXL Web Service on both servers.

Procedure
    Step 1   Perform the following actions to enable services on Cisco Unified Communications Manager:
    1. Log on to Cisco Unified Communications Manager web interface.
    2. Go to Navigation > Cisco Unified Serviceability and click Go.
    3. Click Tools > Service Activation.
    4. Enable the following services, as per the site requirements:

      • Cisco CallManager

      • Cisco CTIManager

      • Cisco Extension Mobility

      • Cisco TFTP

      • Cisco AXL Web Services

      • Cisco DirSync

    5. Click Save.
    Step 2   Perform the following actions to enable services on IM and Presence Service:
    1. Log on to IM and Presence web interface.
    2. At the top right corner, go to Navigation > Cisco Unified IM and Presence Serviceability and click Go.
    3. Select Tools > Service Activation.
    4. Enable the following services, as per the site requirements:

      • Cisco SIP Proxy

      • Cisco Presence Engine

      • Cisco Sync Agent

      • Cisco AXL Web Services

      • Cisco XCP Connection Manager

      • Cisco XCP Directory Service

      • Cisco XCP Authentication Service

    5. Click Save.

    Log In To Application

    Procedure
      Step 1   Open a browser session on your PC.
      Step 2   Enter http://<Prime Collaboration IP Address>. The Prime Collaboration login page appears.
      Step 3   Log in as a globaladmin, using the same the credentials that you specified during initial configuration.

      Was this Document Helpful?

      FeedbackFeedback

      Contact Cisco