Phones that are
automatically tracked using Cisco Discovery Protocol
- Skinny Call Control
Protocol (SCCP) on Cisco Unified IP Phone 8945, 8941, 7985, 7975, 7971, 7970,
7965, 7962, 7961, 7960, 7945, 7942, 7941, 7940, 7937, 7936, 7935, 7931, 7912,
7911, 7910, 7906, 6961, 6945, 6941, 6921, 6911, 6901
- Session Initiation Protocol
(SIP) on Cisco Unified IP Phone 9971, 9951, 8961, 8945, 8941, 8811, 8831, 8841
, 8851 , 8861, 7975, 7971, 7970, 7965, 7962, 7961, 7960, 7945, 7942, 7941,
7940, 7912, 7911, 7906, 6961, 6945, 6941, 6921, 6911, 6901, 3911, 3905; Cisco
IP Phone 7821, 7841, 7861; Cisco IP Video Phone E20; Cisco TelePresence EX60,
EX90, and MX200; Cisco TelePresence System Quick Set C20 and Cisco TelePresence
Codec C40, C60, and C90
Phones: 525G, 512G
- Cisco IP Communicator
- Cisco Desktop Collaboration
Experience DX650, DX70 , DX80
do not require any special Emergency Responder configuration. However, you must
enable Cisco Discovery Protocol on the switches.
Cisco Analog Telephone Adapter (ATA) phones support Cisco Discovery Protocol
and SCCP, Emergency Responder cannot automatically track them. You can add ATA
phones manually and assign them to an Emergency Response Location (ERL).
Emergency Responder will route calls from ATA phones based on the assigned ERL.
Communicator can be tracked using Cisco Discovery Protocol only when it is
installed with the Device ID containing the MAC address of the wired network
interface and operating over a wired network interface.
Phones that you can track
using IP subnet
- Cisco Unified Wireless
IP Phone 7920, 7921G, 7925G, 7925G-EX, 7926G, and Cisco Cius
- Cisco IP Communicator
- Cisco UC Integration for
Microsoft Office Communicator, Cisco UC Integration for Microsoft Lync, Cisco
Jabber, Cisco Unified Personal Communicator, and third-party SIP phones
- Any Cisco Unified IP Phone
or third-party SIP phone that is connected to Cisco or third-party switches
that are not discovered or supported by Emergency Responder
these phones, you must configure the subnet and then assign ERLs to the
endpoint can be tracked at call time using the IP subnet provided that the Use
IP Address from Call Signaling Telephony setting is enabled.
Phones supported for
off-premises location confirmation and update with the Remote Worker Emergency
Calling feature in Unified Communications Manager 9.0 and later
Unified IP Phone 9971, 9951, 8961,8945, 8941, 7975, 7971, 7970, 7965, 7962,
7961, 7945, 7942, and 7941
configured for off-premises use in Unified Communications Manager 9.0 and
later, these phones provide displays for off-premises users to confirm or
update their off-premises location.
user dismisses the display before confirming or updating the location, the
location can be recovered by selecting Running Applications from the Services
menu or by resetting the phone.