Troubleshooting

This chapter includes the following sections:

Replacing a Hardware Component on a Cisco UCS Manager Integrated C-Series Server

After you replace hardware with managed firmware component on a Cisco UCS Manager integrated C-Series server, the server may fail discovery. This could be due to a corrupt firmware on the hardware or incompatibility of the hardware component's firmware. Complete the following steps to ensure server does not fail discovery due to server firmware corruption or incompatibility after hardware replacement:

Procedure


Step 1

Right-click Server -> Server Maintenance > Decommission Server to decommission the server.

Step 2

Disconnect the cables connecting the VICs to the FI (or FEX, if applicable).

Step 3

Remove the server from Cisco UCS Manager:

  1. Choose Equipment -> Decommissioned .

  2. Right-click on the server and click Remove.

Step 4

Reboot the server and perform a CIMC Reset to Factory Defaults.

Step 5

Connect a 1G cable to the MGMT port on the server and configure it for standalone access.

Step 6

Re-image all the server firmware to match the Cisco UCS Manager firmware bundle CIMC version with the server:

  1. Download the Host Upgrade Utility (HUU) from Cisco's software download site for the CIMC version that corresponds to the host firmware package applied to this server in the Cisco UCS Manager.

  2. Boot the server with the standalone KVM and run the HUU package.

For information about steps to upgrade the firmware, refer to the Host Utility Upgrade User Guide that corresponds to the HUU CIMC version that was downloaded in the previous step.

Step 7

Reboot the server and perform a CIMC Reset to Factory Defaults.

Step 8

Unplug the power cables for 30 seconds.

Step 9

Reconnect the uplink cables.

Step 10

Connect the power cables and power on.

Step 11

Verify if the server displays on the Cisco UCS Manager, this may take a few minutes.

Step 12

After the server appears, re-acknowledge the server, if the rack server discovery policy is set to user acknowledge.