New and Changed Information for this Release
The following table provides an overview of the significant changes to this guide for this current release. The table does not provide an exhaustive list of all changes made to this guide or of all new features in this release.
Feature |
Description |
Where Documented |
---|---|---|
Enhancements to email alert on faults |
Starting with this release, you can configure the system to send email alerts for all open faults, based on the configured email alert rule, irrespective of whether you have been notified previously for a fault or not. A new option Send alert for all faults every 24 hours has been introduced in the Add Email Alert Rule screen. If you select this option, the system will send out email alerts every 24 hours for all open faults that match the specified alert rule. |
|
Introduction of the Power Restore policy for Cisco UCS C-series servers. |
Starting with this release, you can configure a power restore policy for Cisco UCS C-series servers. |
|
Support for upgrading firmware from MicroSD cards or FlexFlash cards |
Starting with this release, you can upgrade firmware on rack servers using ISO images from MicroSD cards (for M5 servers) or FlexFlash cards (for M4 servers). MicroSD card is not supported on Cisco UCS S3260 servers. This feature is only supported on Cisco UCS M5 or higher servers running Cisco IMC version 3.1(3a) or higher and on Cisco UCS M4 servers running Cisco IMC version 4.0(2) or higher. |