Table Of Contents
Unset Commands
Revised: July 22, 2009, OL-19335-01This chapter contains the following unset commands:
unset upgrade audio
unset upgrade audio
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Admin
Command privilege level: 3
Command History
Usage Guidelines
Use this command to clear a forced upgrade of the audio peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an "F" in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands.
Examples
admin:unset upgrade audioUnsetting forced audio upgradeRelated Commands
unset upgrade auxiliary-ctrl
unset upgrade auxiliary-ctrl
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Admin
Command privilege level: 3
Command History
Usage Guidelines
Use this command to clear a forced upgrade of the auxiliary-ctrl peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an "F" in the output. You can mark a peripheral by using the
set upgrade commands. See Set Commands.Examples
admin:unset upgrade auxiliary-ctrlUnsetting forced auxiliary-ctrl upgradeRelated Commands
unset upgrade camera
unset upgrade camera
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Admin
Command privilege level: 3
Command History
Usage Guidelines
Use this command to clear a forced upgrade of the camera peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an "F" in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands.
Examples
admin:unset upgrade cameraUnsetting forced camera upgradeRelated Commands
unset upgrade display
unset upgrade display
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Admin
Command privilege level: 3
Command History
Usage Guidelines
Use this command to clear a forced upgrade of the display peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an "F" in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands.
Examples
admin:unset upgrade displayUnsetting forced display upgradeRelated Commands
unset upgrade firmware
unset upgrade firmware
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Admin
Command privilege level: 3
Command History
Usage Guidelines
Use this command to clear a forced upgrade of the firmware peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an "F" in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands.
Examples
admin:unset upgrade firmwareUnsetting forced firmware upgradeRelated Commands
unset upgrade graphic-driver
unset upgrade graphic-driver
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Admin
Command privilege level: 3
Command History
Release Modifications1.2
This command was introduced as unset upgrade disp-driver-2.
1.4.0
The command, unset upgrade disp-driver-2, was replaced by unset upgrade graphic-driver.
Usage Guidelines
Use this command to clear a forced upgrade of the graphic driver. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an "F" in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands.
Examples
admin:unset upgrade graphic-driverUnsetting forced graphic driver upgradeRelated Commands
unset upgrade graphic-icons
unset upgrade graphic-icons
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Admin
Command privilege level: 3
Command History
Release Modifications1.2
This command was introduced as unset upgrade disp-driver-1.
1.4.0
The command, unset upgrade disp-driver-1, was replaced with unset upgrade graphic-icons.
Usage Guidelines
Use this command to clear a forced upgrade of the of the graphic icons. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an "F" in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands.
Examples
admin:unset upgrade graphic-iconsUnsetting forced graphic icons upgradeRelated Commands