The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
aaa accounting dot1x command 2-1
aaa authentication dot1x command 2-3
AAA methods 2-3
access control entries
access control lists
access groups
IP 2-133
MAC, displaying 2-482
matching for QoS classification 2-249
access list, IPv6 2-196
access mode 2-640
access ports 2-640
ACLs
as match criteria for QoS classes 2-249
deny 2-75
displaying 2-364
for non-IP protocols 2-227
IP 2-133
on Layer 2 interfaces 2-133
permit 2-286
action command 2-5
address aliasing 2-269
aggregate policers
applying 2-299
creating 2-295
displaying 2-517
QoS 2-297
aggregate-port learner 2-275
alarm-contact command 2-7
alarm-contact status, displaying 2-396
allowed VLANs 2-656
archive download-sw command 2-9
archive tar command 2-12
archive upload-sw command 2-15
arp (boot loader) command A-2
arp access-list command 2-17
attaching policy maps to interfaces 2-347
authorization state of controlled port 2-90
autonegotiation of duplex mode 2-101
B
backup interfaces
configuring 2-633
displaying 2-418
bandwidth, configuring for QoS 2-19
bandwidth command 2-19
boot (boot loader) command A-3
boot config-file command 2-22
boot enable-break command 2-23
boot helper command 2-24
boot helper-config file command 2-25
booting
Cisco IOS image 2-28
displaying environment variables 2-369
interrupting 2-23
manually 2-26
boot loader
accessing A-1
booting
Cisco IOS image A-3
helper image 2-24
directories
creating A-18
displaying a list of A-8
removing A-22
displaying
available commands A-13
memory heap utilization A-14
version A-29
environment variables
described A-23
displaying settings A-23
location of A-24
setting A-23
unsetting A-27
files
copying A-6
deleting A-7
displaying a list of A-8
displaying the contents of A-5, A-19, A-26
renaming A-20
file system
formatting A-11
initializing flash A-10
running a consistency check A-12
prompt A-1
resetting the system A-21
boot manual command 2-26
boot private-config-file command 2-27
boot system command 2-28
BPDU filtering, for spanning tree 2-578, 2-616
BPDU guard, for spanning tree 2-580, 2-616
broadcast storm control 2-626
bundling characteristics, UNI 2-109
burst bytes, in QoS policers 2-290, 2-291, 2-295
C
cat (boot loader) command A-5
CBWFQ, configuring 2-19
CDP, enabling protocol tunneling for 2-207
CFM 2-274
CFM as OAM protocol 2-274
channel-group command 2-29
channel-protocol command 2-33
child policy maps 2-349
class-based traffic shaping 2-362
class-based weighted fair queuing
class command 2-35
class-map command 2-37
class-map configuration mode 2-37
class maps
creating 2-37
defining the match criteria 2-250
displaying 2-373
matching in 2-37
class of service
clear ip arp inspection log command 2-39
clear ip arp inspection statistics command 2-40
clear ipc command 2-43
clear ipv6 dhcp conflict command 2-44
clear l2protocol-tunnel counters command 2-45
clear lacp command 2-46
clear logging onboard command 2-47
clear mac address-table command 2-48, 2-49
clear policer cpu uni-eni counters command 2-51
clear port-security command 2-52
clear spanning-tree counters command 2-55
clear spanning-tree detected-protocols command 2-56
clear vmps statistics command 2-58
command modes defined 1-1
committed information rate in QoS policers 2-289, 2-295
configuration files
password recovery disable considerations A-1
specifying the name 2-22, 2-27
configuring multiple interfaces 2-129
conform-action command 2-59
control-plane policer 2-51
control-plane policer information, displaying 2-518
control-plane security 2-301
control plane statistics, clearing 2-51
copy (boot loader) command A-6
copy logging onboard module command 2-61
CoS
as match criteria for QoS groups 2-250
for QoS classification 2-351
setting value in policy maps 2-351
CoS value, assigning to Layer 2 protocol packets 2-210
CPU ASIC statistics, displaying 2-374
CPU protection policers, displaying C-26
cpu traffic qos 2-63
D
DC power supply 2-310
debug backup command B-2
debug dot1x command B-3
debug etherchannel command B-4
debug interface command B-9
debug ip dhcp snooping command B-7
debug ip igmp filter command B-10
debug ip igmp max-groups command B-11
debug ip igmp snooping command B-12
debug ip verify source packet command B-8
debug lacp command B-13
debug mac-notification command B-14
debug matm command B-15
debug matm move update command B-16
debug monitor command B-17
debug mvrdbg command B-18
debug nvram command B-19
debug pagp command B-20
debug platform acl command B-21
debug platform backup interface command B-23
debug platform cfm command B-22
debug platform cpu-queues command B-24
debug platform dot1x command B-26
debug platform etherchannel command B-27
debug platform forw-tcam command B-28
debug platform ip arp inspection command B-29
debug platform ipc command B-38
debug platform ip dhcp command B-30
debug platform ip igmp snooping command B-31
debug platform ip multicast command B-33
debug platform ip source-guard command B-35
debug platform led command B-39
debug platform matm command B-40
debug platform messaging application command B-41
debug platform phy command B-42
debug platform pm command B-44
debug platform policer cpu uni-eni command B-46
debug platform port-asic command B-47
debug platform port-security command B-48
debug platform qos-acl-tcam command B-49
debug platform qos-manager command B-50
debug platform remote-commands command B-51
debug platform rep command B-52
debug platform resource-manager command B-53
debug platform snmp command B-54
debug platform span command B-55
debug platform supervisor-asic command B-56
debug platform sw-bridge command B-57
debug platform tcam command B-58
debug platform udld command B-60
debug platform vlan command B-61
debug pm command B-62
debug port-security command B-64
debug qos-manager command B-65
debug spanning-tree bpdu command B-68
debug spanning-tree bpdu-opt command B-69
debug spanning-tree command B-66
debug spanning-tree mstp command B-70
debug spanning-tree switch command B-72
debug sw-vlan command B-74
debug sw-vlan ifs command B-75
debug sw-vlan notification command B-76
debug udld command B-78
debug vqpc command B-80
default policer configuration
NNIs C-29
UNIs C-27
define interface-range command 2-65
delete (boot loader) command A-7
delete command 2-67
deny (ARP access-list configuration) command 2-68
deny (IPv6) command 2-70
deny command 2-75
detect mechanism, causes 2-102
DHCP snooping
accepting untrusted packets from edge switch 2-157
enabling
on a VLAN 2-163
trust on an interface 2-161
error recovery timer 2-104
rate limiting 2-160
DHCP snooping binding database
binding file, configuring 2-153
bindings
adding 2-151
deleting 2-151
displaying 2-439
clearing database agent statistics 2-41
database agent, configuring 2-153
displaying
binding entries 2-439
database agent status 2-441, 2-443
renewing 2-325
diagnostic monitor command 2-78
diagnostic schedule test command 2-80
diagnostic start test command 2-82
differentiated service code point
Digital Optical Monitoring
dir (boot loader) command A-8
directories, deleting 2-67
DoM
displaying supported transceivers 2-430
domains, CFM 2-274
dot1x default command 2-84
dot1x host-mode command 2-85
dot1x initialize command 2-87
dot1x max-req command 2-88, 2-89
dot1x port-control command 2-90
dot1x re-authenticate command 2-92
dot1x reauthentication command 2-93
dot1x system-auth-control command 2-94
dot1x test eapol-capable command 2-95
dot1x test timeout command 2-96
dot1x timeout command 2-97
dot1x violation-mode command 2-99
dropping packets, with ACL matches 2-5
drop threshold, Layer 2 protocol tunneling 2-207
DSCP
as match criteria for QoS groups 2-251, 2-257
for QoS traffic marking 2-353
setting in policy maps 2-353
dual IPv4 and IPv6 templates 2-281
dual-purpose uplink ports, selecting the type 2-262
duplex command 2-100
dynamic-access ports
configuring 2-631
restrictions 2-632
dynamic ARP inspection
ARP ACLs
apply to a VLAN 2-138
define 2-17
deny packets 2-68
display 2-368
permit packets 2-279
clear
log buffer 2-39
statistics 2-40
display
ARP ACLs 2-368
configuration and operating state 2-434
log buffer 2-434
statistics 2-434
trust state and rate limit 2-434
enable per VLAN 2-147
error detection for 2-102
error recovery timer 2-104
log buffer
clear 2-39
configure 2-142
display 2-434
rate-limit incoming ARP packets 2-140
statistics
clear 2-40
display 2-434
trusted interface state 2-144
type of packet logged 2-148
validation checks 2-145
Dynamic Host Configuration Protocol (DHCP)
E
EAP-request/identity frame
maximum number to send 2-89
response time before retransmitting 2-97
E-LMI
enabling 2-107
mapping 2-109
environment variables, displaying 2-369
errdisable detect cause command 2-102
errdisable recovery command 2-104
error conditions, displaying 2-400
error disable detection 2-102
error-disabled interfaces, displaying 2-418
EtherChannel
assigning Ethernet interface to channel group 2-29
creating port-channel logical interface 2-127
debug EtherChannel/PAgP, display B-4
debug platform-specific events, display B-27
displaying 2-404
enabling Layer 2 protocol tunneling for
LACP 2-208
PAgP 2-208
UDLD 2-208
interface information, displaying 2-418
LACP
clearing channel-group information 2-46
debug messages, display B-13
displaying 2-469
modes 2-29
port priority for hot-standby ports 2-211
restricting a protocol 2-33
system priority 2-213
load-distribution methods 2-306
PAgP
aggregate-port learner 2-275
clearing channel-group information 2-50
debug messages, display B-20
displaying 2-513
error detection for 2-102
error recovery timer 2-104
learn method 2-275
modes 2-29
physical-port learner 2-275
priority of interface for transmitted traffic 2-277
ethermet lmi ce command 2-107
Ethernet controller, internal register display 2-376
ethernet evc command 2-106
ethernet lim global command 2-107
ethernet lmi ce-vlan map command 2-109, 2-116
ethernet lmi command 2-107
Ethernet Local Management Interface
ethernet loopback interface configuration command 2-111
ethernet loopback privileged EXEC command 2-114
Ethernet service
debugging B-5
displaying 2-409
Ethernet service instance 2-343
Ethernet service interfaces 2-412
Ethernet statistics, collecting 2-339
Ethernet UNI configuration 2-118
ethernet uni id command 2-120
Ethernet virtual connections
EVC configuration mode 2-106
EVCs 2-106
and VLANs 2-118
service instances 2-343
UNI counts 2-678
EVC service
point-to-multipoint 2-678
point-to-point 2-678
exceed-action command 2-121
extended-range VLANs
and allowed VLAN list 2-656
configuring 2-684
extended system ID for STP 2-586
external alarms, configuring 2-7
F
failure logging data
clearing 2-47
copying 2-61
fan information, displaying 2-396
files, deleting 2-67
flash_init (boot loader) command A-10
Flex Links
configuring 2-633
configuring preferred VLAN 2-635
displaying 2-418
flowcontrol command 2-123
format (boot loader) command A-11
forwarding packets, with ACL matches 2-5
forwarding results, display C-8
frame forwarding information, displaying C-8
front-end controller counter and status information C-10
fsck (boot loader) command A-12
G
global configuration mode 1-2, 1-3
H
hardware ACL statistics 2-364
health-monitoring diagnostic testing 2-78
help (boot loader) command A-13
host connection, port configuration 2-639
host ports, private VLANs 2-643
hw-module module logging onboard command 2-125
I
IEEE 802.1ag Connectivity Fault Management
IEEE 802.1Q trunk ports and native VLANs 2-689
IEEE 802.1Q tunnel ports
configuring 2-640
displaying 2-392
limitations 2-641
IEEE 802.1x
and switchport modes 2-641
violation error recovery 2-104
See also port-based authentication
IGMP filters
applying 2-166
debug messages, display B-10
IGMP groups, setting maximum 2-168
IGMP maximum groups, debugging B-11
IGMP profiles
creating 2-170
displaying 2-446
IGMP snooping
adding ports as a static member of a group 2-185
displaying 2-447, 2-451, 2-453
enabling 2-172
enabling the configurable-leave timer 2-174
enabling the Immediate-Leave feature 2-182
flooding query count 2-180
interface topology change notification behavior 2-181
multicast table 2-449
querier 2-176
query solicitation 2-180
report suppression 2-178
switch topology change notification behavior 2-180
images
Immediate-Leave feature, MVR 2-271
immediate-leave processing 2-182
input policy maps
and ACL classification 2-249
and aggregate policers 2-297
commands not supported in 2-304
configuration guidelines 2-304
interface command 2-131
interface configuration mode 1-2, 1-4
interface port-channel command 2-127
interface range command 2-129
interface-range macros 2-63, 2-65
interfaces
assigning Ethernet interface to channel group 2-29
configuring 2-100
configuring multiple 2-129
creating port-channel logical 2-127
debug messages, display B-9
disabling 2-563
displaying the MAC address table 2-494
restarting 2-563
interface speed, configuring 2-624
internal registers, displaying 2-376, 2-383, 2-387
Internet Group Management Protocol
invalid GBIC
error detection for 2-102
error recovery timer 2-104
ip address command 2-136
IP addresses, setting 2-136
IP address matching 2-247
ip arp inspection filter vlan command 2-138
ip arp inspection limit command 2-140
ip arp inspection log-buffer command 2-142
ip arp inspection trust command 2-144
ip arp inspection validate command 2-145
ip arp inspection vlan command 2-147
ip arp inspection vlan logging command 2-148
IP DHCP snooping
ip dhcp snooping binding command 2-151
ip dhcp snooping command 2-150
ip dhcp snooping database command 2-153
ip dhcp snooping information option allow-untrusted command 2-157
ip dhcp snooping information option command 2-155
ip dhcp snooping information option format remote-id command 2-159
ip dhcp snooping limit rate command 2-160
ip dhcp snooping trust command 2-161
ip dhcp snooping verify command 2-162
ip dhcp snooping vlan command 2-163
ip dhcp snooping vlan information option format-type circuit-id string command 2-164
ip igmp filter command 2-166
ip igmp max-groups command 2-168, 2-191, 2-193
ip igmp profile command 2-170
ip igmp snooping command 2-172
ip igmp snooping last-member-query-interval command 2-174
ip igmp snooping querier command 2-176
ip igmp snooping report-suppression command 2-178
ip igmp snooping tcn command 2-180
ip igmp snooping tcn flood command 2-181
ip igmp snooping vlan immediate-leave command 2-182
ip igmp snooping vlan mrouter command 2-183
ip igmp snooping vlan static command 2-185
IP multicast addresses 2-268
IP precedence, as match criteria for QoS groups 2-253
ip source binding command 2-187
IP source guard
disabling 2-195
displaying
binding entries 2-455
configuration 2-456
enabling 2-195
static IP source bindings 2-187
IP source guard, displaying dynamic binding entries 2-439
ip ssh command 2-189
IPv6 access list, deny conditions 2-70
ipv6 access-list command 2-196
ipv6 address dhcp command 2-198
ipv6 dhcp client request vendor command 2-199
ipv6 dhcp ping packets command 2-200
ipv6 dhcp pool command 2-201
ipv6 dhcp server command 2-203
IPv6 SDM template 2-340
ipv6 traffic-filter command 2-205
ip verify source command 2-195
J
jumbo frames
L
l2protocol-tunnel command 2-207
l2protocol-tunnel cos command 2-210
LACP
lacp port-priority command 2-211
lacp system-priority command 2-213
Layer 2 mode, enabling 2-629
Layer 2 protocol ports, displaying 2-467
Layer 2 protocol-tunnel
error detection for 2-102
error recovery timer 2-104
Layer 2 protocol tunnel counters 2-45
Layer 2 protocol tunneling error recovery 2-208
Layer 2 traceroute
IP addresses 2-671
MAC addresses 2-668
Layer 3 mode, enabling 2-629
line configuration mode 1-2, 1-4
Link Aggregation Control Protocol
link flap
error detection for 2-102
error recovery timer 2-104
link state group command 2-215
link state track command 2-217
load-distribution methods for EtherChannel 2-306
location (global configuration) command 2-218
location (interface configuration) command 2-220
logging event command 2-222
logging file command 2-223
logical interface 2-127
loopback error
detection for 2-102
recovery timer 2-104
loop guard, for spanning tree 2-588, 2-592
M
mac access-group command 2-225
MAC access-groups, displaying 2-482
MAC access list configuration mode 2-227
mac access-list extended command 2-227
MAC access lists 2-75
MAC addresses
disabling MAC address learning per VLAN 2-230
displaying
aging time 2-488
all 2-486
dynamic 2-492
MAC address-table move updates 2-497
notification settings 2-496, 2-499
number of addresses in a VLAN 2-490
per interface 2-494
per VLAN 2-503
static 2-501
static and dynamic entries 2-484
dynamic
aging time 2-229
deleting 2-48
displaying 2-492
enabling MAC address notification 2-234
enabling MAC address-table move update 2-232
matching 2-247
static
adding and removing 2-236
displaying 2-501
dropping on an interface 2-237
tables 2-486
MAC address notification, debugging B-14
mac address-table aging-time 2-225, 2-247
mac address-table aging-time command 2-229
mac address-table learning command 2-230
mac address-table move update command 2-232
mac address-table notification command 2-234
mac address-table static command 2-236
mac address-table static drop command 2-237
macro description command 2-241
macro global command 2-242
macro global description command 2-244
macro name command 2-245
macros
adding a description 2-241
adding a global description 2-244
applying 2-242
creating 2-245
displaying 2-515
specifying parameter values 2-242
tracing 2-242
maintenance end points 2-678
mapping tables, QoS 2-664
maps
class
creating 2-37
VLAN
creating 2-687
defining 2-247
displaying 2-557
match access-group command 2-249
match cos command 2-250
match ip dscp command 2-251
match ip precedence command 2-253
match qos-group command 2-255
match vlan command 2-257
maximum transmission unit
mdix auto command 2-260
ME 34000EG-2CS switch policers C-26
ME 3400E-24TS switch policers C-26, C-27
ME 3400EG-12CS switch policers C-26
media-type command 2-262
memory (boot loader) command A-14
mgmt_clr (boot loader) command A-15
mgmt_init (boot loader) command A-16, A-17
mkdir (boot loader) command A-18
mode, MVR 2-268
modes, commands 1-1
monitor session command 2-264
more (boot loader) command A-19
MSTP
displaying 2-537
interoperability 2-56
link type 2-590
MST region
aborting changes 2-596
applying changes 2-596
configuration name 2-596
configuration revision number 2-597
current or pending display 2-597
displaying 2-537
MST configuration mode 2-596
VLANs-to-instance mapping 2-596
path cost 2-598
protocol mode 2-594
restart protocol migration process 2-56
root port
loop guard 2-588
preventing from becoming designated 2-588
restricting which can be root 2-588
root guard 2-588
root switch
affects of extended system ID 2-586
interval between BDPU messages 2-603
interval between hello BPDU messages 2-601, 2-612
max-age 2-603
maximum hop count before discarding BPDU 2-605
port priority for selection of 2-607
primary or secondary 2-612
switch priority 2-610
state changes
blocking to forwarding state 2-619
enabling BPDU filtering 2-578, 2-616
enabling BPDU guard 2-580, 2-616
enabling Port Fast 2-616, 2-619
forward-delay time 2-600
length of listening and learning states 2-600
rapid transition to forwarding 2-590
shutting down Port Fast-enabled ports 2-616
state information display 2-536
MTU
configuring size 2-662
displaying global setting 2-544
multicast group address, MVR 2-271
multicast groups, MVR 2-269
multicast router learning method 2-183
multicast router ports, configuring 2-183
multicast storm control 2-626
multicast VLAN, MVR 2-268
multicast VLAN registration
multiple hosts on authorized port 2-85
Multiple Spanning Tree Protocol
multiplexing, UNI 2-118
MVR
and address aliasing 2-269
configuring 2-268
configuring interfaces 2-271
debug messages, display B-18
displaying 2-507
displaying interface information 2-509
members, displaying 2-511
mvr (global configuration) command 2-268
mvr (interface configuration) command 2-271
mvr vlan group command 2-272
N
native VLANs 2-656
native VLAN tagging 2-689
network node interface 2-308
nonegotiate, speed 2-624, 2-625
non-IP protocols
denying 2-75
forwarding 2-286
non-IP traffic access lists 2-227
non-IP traffic forwarding
denying 2-75
permitting 2-286
normal-range VLANs 2-684
no vlan command 2-684
O
OAM PDUs 2-116
OAM protocol 2-274
oam protocol cfm svlan command 2-274
on-board failure logging, displaying 2-478
on-board failure logging, enabling 2-125
online diagnostics
enabling
scheduling 2-80
global configuration mode
clearing test-based testing schedule 2-80
setting test-based testing 2-80
setting up test-based testing 2-80
removing scheduling 2-80
scheduled switchover
disabling 2-80
enabling 2-80
setting test interval 2-80
starting testing 2-82
online diagnostic tests, displaying results 2-388
online diagnostic tests, starting 2-82
operation, administration, and maintenance protocol
output policy maps
and QoS group classification 2-255
and traffic shaping 2-362
commands not supported in 2-304
configuration guidelines 2-304
priority in 2-313
queue limit in 2-320
P
PAgP
pagp learn-method command 2-275
pagp port-priority command 2-277
parent policy maps 2-349
password-recovery mechanism, enabling and disabling 2-345
permit (ARP access-list configuration) command 2-279
permit (IPv6) command 2-281
permit command 2-286
per-VLAN spanning-tree plus
physical-port learner 2-275
PID, displaying 2-433
PIM-DVMRP, as multicast router learning method 2-183
police
multiple conform actions for a class 2-59
multiple exceed actions for a class 2-121
multiple violate actions for a class 2-682
with priority 2-289
police aggregate command 2-299
police command 2-289
policer aggregate command 2-295
policer configuration
default for NNIs C-29
default for UNIs C-27
policer cpu uni command 2-301
policers
for CPU protection 2-301
individual 2-289
policy-map class, configuring multiple actions 2-59, 2-121, 2-682
policy-map class configuration mode 2-35
policy-map class police configuration mode 2-59, 2-293
policy-map command 2-303
policy-map configuration mode 2-303
policy maps
and CoS classification 2-250
and DSCP classification 2-251
and IP precedence classification 2-253
and policing 2-292
applying 2-347
applying to an interface 2-304, 2-347, 2-359
child 2-349
creating 2-303
displaying 2-521
hierarchical 2-349
parent 2-349
policers
for a single class 2-289
for multiple classes 2-295, 2-299, 2-301, 2-349
setting priority 2-312
setting QoS group identifier 2-357
traffic classification, defining 2-35
traffic marking
setting CoS values 2-351
setting DSCP values 2-353
setting IP precedence values 2-355
Port Aggregation Protocol
port-based authentication
AAA method list 2-3
configuring violation modes 2-99
debug messages, display B-3
enabling 802.1x
globally 2-94
per interface 2-90
host modes 2-85
IEEE 802.1x AAA accounting methods 2-1
initialize an interface 2-87, 2-96
manual control of authorization state 2-90
multiple hosts on authorized port 2-85
periodic re-authentication
enabling 2-93
time between attempts 2-97
quiet period between failed authentication exchanges 2-97
re-authenticating 802.1x-enabled ports 2-92
resetting configurable 802.1x parameters 2-84
switch-to-authentication server retransmission time 2-97
switch-to-client frame-retransmission number2-88to 2-89
switch-to-client retransmission time 2-97
test for IEEE 802.1x readiness 2-95
port-channel load-balance command 2-306
Port Fast, for spanning tree 2-619
port ranges, defining 2-47, 2-61, 2-63, 2-65
ports, debugging B-62
ports, protected 2-654
port security
aging 2-650
debug messages, display B-64
enabling 2-646
violation error recovery 2-104
port shaping 2-363
port-type command 2-308
port types, MVR 2-271
power information, displaying 2-396
power-supply alarm indications, configruing 2-310
power-supply dual command 2-310
power-supply status, displaying 2-396
precedence
for QoS traffic marking 2-355
setting in policy maps 2-355
priority command 2-312
priority queuing, QoS 2-312
priority with police, QoS 2-312
private-vlan command 2-315
private-vlan mapping command 2-318
private VLANs
association 2-652
configuring 2-315
configuring ports 2-643
displaying 2-552
host ports 2-643
mapping
configuring 2-652
displaying 2-418
promiscuous ports 2-643
product identification information, displaying 2-433
promiscuous ports, private VLANs 2-643
PVST+
Q
QoS
aggregate policers
applying 2-299
creating 2-295
displaying 2-517
class maps
creating 2-37
defining the match criteria 2-250
displaying 2-373
conform actions, configuring 2-60
displaying statistics for 2-521, C-35
exceed actions, configuring 2-122
policy maps
applying an aggregate policer 2-295, 2-299, 2-301, 2-349
applying to an interface 2-347, 2-359
creating 2-303
defining policers 2-289
displaying policy maps 2-521
setting CoS values 2-351
setting DSCP values 2-353
setting IP precedence values 2-355
setting QoS group identifier 2-357
traffic classifications 2-35
table maps
configuring 2-664
displaying 2-545
violate actions, configuring 2-683
QoS groups
as match criteria 2-255
for QoS traffic classification 2-357
setting in policy maps 2-357
QoS match criteria
ACLs 2-249
CoS value 2-250
precedence value 2-253
QoS group number 2-255
quality of service
querytime, MVR 2-268
queue-limit command 2-320
R
rapid per-VLAN spanning-tree plus
rapid PVST+
re-authenticating 802.1x-enabled ports 2-92
re-authentication
periodic 2-93
time between attempts 2-97
receiver ports, MVR 2-271
receiving flow-control packets 2-123
recovery mechanism
causes 2-104
timer interval 2-105
remote-span command 2-323
Remote Switched Port Analyzer
rename (boot loader) command A-20
renew ip dhcp snooping database command 2-325
rep admin vlan command 2-326
rep block port command 2-327
rep lsl-age-timer command 2-330
rep preempt delay command 2-331
rep preempt segment command 2-333
rep segment command 2-334
rep stcn command 2-337
reset (boot loader) command A-21
resource templates, displaying 2-534
rmdir (boot loader) command A-22
rmon collection stats command 2-339
root guard, for spanning tree 2-588
routed ports
IP addresses on 2-137
number supported 2-137
RSPAN
configuring 2-264
displaying 2-505
filter RSPAN traffic 2-264
remote-span command 2-323
sessions
add interfaces to 2-264
displaying 2-505
start new 2-264
S
scheduled switchover
disabling 2-80
enabling 2-80
scheduling diagnostic tests 2-80
sdm prefer command 2-340
SDM templates
allowed resources 2-341
displaying 2-534
dual IPv4 and IPv6 2-340
secure ports, limitations 2-648
sending flow-control packets 2-123
service instance command 2-343
service instances, displaying 2-410
service password-recovery command 2-345
service policy (policy-map class configuration) command 2-349
service-policy interface configuration command 2-347
service-policy policy-map class configuration command 2-349
set (boot loader) command A-23
set cos command 2-351
set dscp command 2-353
set precedence command 2-355
set qos-group command 2-357
setup command 2-359
SFPs, displaying information about 2-433
shape average command 2-362
show access-lists command 2-364
show aggregate-policer command 2-545
show archive status command 2-367
show arp access-list command 2-368
show boot command 2-369
show class-map command 2-373
show controllers cpu-interface command 2-374
show controllers ethernet-controller command 2-376
show controllers tcam command 2-383
show controllers utilization command 2-385
show controller utilization command 2-385
show cpu traffic qos 2-387
show diagnostic command 2-388
show dot1q-tunnel command 2-392
show dot1x command 2-393
show env command 2-396
show errdisable detect command 2-398
show errdisable flap-values command 2-400
show errdisable recovery command 2-402
show etherchannel command 2-404
show ethernet loopback command 2-407
show ethernet service evc command 2-409
show ethernet service instance command 2-410
show ethernet service interface command 2-412
show flowcontrol command 2-414
show idprom command 2-416
show interface rep command 2-428
show interfaces command 2-418
show interfaces counters command 2-426
show interfaces rep command 2-428
show interface transceivers command 2-430
show inventory command 2-433
show ip arp inspection command 2-434
show ipc command 2-458
show ip dhcp snooping binding command 2-439
show ip dhcp snooping command 2-438
show ip dhcp snooping database command 2-441, 2-443
show ip igmp profile command 2-446
show ip igmp snooping command 2-447
show ip igmp snooping command querier detail 2-453
show ip igmp snooping groups command 2-449
show ip igmp snooping mrouter command 2-451
show ip igmp snooping querier command 2-453
show ip igmp snooping querier detail command 2-453
show ip source binding command 2-455
show ipv6 access-list command 2-462
show ipv6 dhcp conflict command 2-464
show ipv6 route updated 2-465
show ipv6 route updated command 2-465
show ip verify source command 2-456
show l2protocol-tunnel command 2-467
show lacp command 2-469
show link state group command 2-473
show location 2-475
show location command 2-475
show logging onboard command 2-478
show mac access-group command 2-482
show mac address-table address command 2-486
show mac address-table aging time command 2-488
show mac address-table command 2-484
show mac address-table count command 2-490
show mac address-table dynamic command 2-492
show mac address-table interface command 2-494
show mac address-table learning command 2-496
show mac address-table move update command 2-497
show mac address-table notification command 2-49, 2-499, B-16
show mac address-table static command 2-501
show mac address-table vlan command 2-503
show monitor command 2-505
show mvr command 2-507
show mvr interface command 2-509
show mvr members command 2-511
show pagp command 2-513
show parser macro command 2-515
show platform acl command C-2
show platform backup interface command C-3
show platform cfm command C-4
show platform configuration command C-5
show platform dl command C-6
show platform etherchannel command C-7
show platform forward command C-8
show platform frontend-controller command C-10
show platform igmp snooping command C-11
show platform ipc trace command C-16
show platform ip multicast command C-13
show platform ip unicast command C-14
show platform ipv6 unicast command C-17
show platform l2pt dm command C-19
show platform layer4op command C-20, C-42
show platform mac-address-table command C-21
show platform messaging command C-22
show platform monitor command C-23
show platform mvr table command C-24
show platform pm command C-25
show platform policer cpu command C-26
show platform port-asic command C-30
show platform port-security command C-34
show platform qos command C-35
show platform resource-manager command C-38
show platform snmp counters command C-40
show platform spanning-tree synchronization command C-41
show platform stp-instance command C-43
show platform tcam command C-44
show platform vlan command C-47
show platform vlan mapping command C-48
show policer aggregate command 2-517
show policer cpu uni-eni command 2-518
show policy-map command 2-521
show policy-map interface output fields 2-524
show port security command 2-526
show port-type command 2-529
show rep topology command 2-531
show sdm prefer command 2-534
show spanning-tree command 2-536
show storm-control command 2-542
show system mtu command 2-544
show udld command 2-547
show version command 2-550
show vlan access-map command 2-557
show vlan command 2-552
show vlan command, fields 2-554
show vlan filter command 2-558
show vlan mapping command 2-559
show vmps command 2-561
shutdown command 2-563
shutdown threshold, Layer 2 protocol tunneling 2-207
shutdown vlan command 2-564
SNMP host, specifying 2-570
SNMP informs, enabling the sending of 2-566
snmp mib rep trap-rate command 2-565
snmp-server enable traps command 2-566
snmp-server host command 2-570
snmp trap mac-notification command 2-574
SNMP traps
enabling MAC address notification trap 2-574
enabling the MAC address notification feature 2-234
enabling the sending of 2-566
software images
deleting 2-67
downloading 2-9
upgrading 2-9
uploading 2-15
software version, displaying 2-550
source ports, MVR 2-271
SPAN
configuring 2-264
debug messages, display B-17
displaying 2-505
filter SPAN traffic 2-264
sessions
add interfaces to 2-264
displaying 2-505
start new 2-264
spanning-tree bpdufilter command 2-576, 2-578
spanning-tree bpduguard command 2-580
spanning-tree cost command 2-582
spanning-tree etherchannel command 2-584
spanning-tree extend system-id command 2-586
spanning-tree guard command 2-588
spanning-tree link-type command 2-590
spanning-tree loopguard default command 2-592
spanning-tree mode command 2-594
spanning-tree mst configuration command 2-596
spanning-tree mst cost command 2-598
spanning-tree mst forward-time command 2-600
spanning-tree mst hello-time command 2-601
spanning-tree mst max-age command 2-603
spanning-tree mst max-hops command 2-605
spanning-tree mst port-priority command 2-607
spanning-tree mst pre-standard command 2-609
spanning-tree mst priority command 2-610
spanning-tree mst root command 2-612
spanning-tree portfast (global configuration) command 2-616
spanning-tree portfast (interface configuration) command 2-619
spanning-tree port-priority command 2-614
Spanning Tree Protocol
spanning-tree vlan command 2-621
speed command 2-624
SSH, configuring version 2-189
static-access ports, configuring 2-631
statistics, Ethernet group 2-339
sticky learning, enabling 2-646
storm-control command 2-626
STP
counters, clearing 2-55
debug messages, display
MSTP B-70
optimized BPDUs handling B-69
spanning-tree activity B-66
switch shim B-72
transmitted and received BPDUs B-68
enabling on ENIs 2-576
enabling protocol tunneling for 2-207
EtherChannel misconfiguration 2-584
extended system ID 2-586
path cost 2-582
protocol modes 2-594
root port
loop guard 2-588
preventing from becoming designated 2-588
restricting which can be root 2-588
root guard 2-588
root switch
affects of extended system ID 2-586, 2-622
hello-time 2-621
interval between BDPU messages 2-621
interval between hello BPDU messages 2-621
max-age 2-621
port priority for selection of 2-614
primary or secondary 2-621
switch priority 2-621
state changes
blocking to forwarding state 2-619
enabling BPDU filtering 2-578, 2-616
enabling BPDU guard 2-580, 2-616
enabling Port Fast 2-616, 2-619
enabling timer to recover from error state 2-104
forward-delay time 2-621
length of listening and learning states 2-621
shutting down Port Fast-enabled ports 2-616
state information display 2-536
SVIs, creating 2-131
Switched Port Analyzer
switching characteristics
modifying 2-629
returning to interfaces 2-629
switchport access command 2-631
switchport backup interface command 2-633
switchport block command 2-637
switchport command 2-629
switchport host command 2-639
switchport mode command 2-640
switchport mode private-vlan command 2-643
switchport port-security aging command 2-650
switchport port-security command 2-646
switchport private-vlan command 2-652
switchport protected command 2-654
switchports, displaying 2-418
switchport trunk command 2-656
switchport vlan mapping command 2-658
system env temperature threshold yellow command 2-661
system message logging, save message to flash 2-223
system mtu command 2-662
system resource templates 2-340
T
table-map command 2-664
table-map configuration mode 2-664
table maps
configuring 2-664
displaying 2-545
QoS 2-664
tar files, creating, listing, and extracting 2-12
TDR, running 2-666
temperature information, displaying 2-396
temperature status, displaying 2-396
templates, system resources 2-340
test cable-diagnostics tdr command 2-666
traceroute mac command 2-668
traceroute mac ip command 2-671
traffic shaping, QoS 2-362
trunking, VLAN mode 2-640
trunk mode 2-640
trunk ports 2-640
tunnel ports, Layer 2 protocol, displaying 2-467
type (boot loader) command A-26
U
UDLD
debug messages, display B-78
enable globally 2-673
enable per interface 2-675
error recovery timer 2-104
message timer 2-673
reset a shutdown interface 2-677
status 2-547
udld command 2-673
udld port command 2-675
udld reset command 2-677
UNI
bundling and multiplexing 2-118
Ethernet 2-118
unicast storm control 2-626
uni count command 2-678
UniDirectional Link Detection
UNI ID, Ethernet 2-120
uni-vlan command 2-680
unknown multicast traffic, preventing 2-637
unknown unicast traffic, preventing 2-637
unset (boot loader) command A-27
upgrading
software images 2-9
monitoring status of 2-367
user EXEC mode 1-2
user network interface 2-308
V
version (boot loader) command A-29
violate-action command 2-682
vlan access-map command 2-687
VLAN access map configuration mode 2-687
VLAN access maps
actions 2-5
displaying 2-557
vlan command 2-684
VLAN configuration mode
commands 2-684
description 1-4
entering 2-684
summary 1-2
vlan dot1q tag native command 2-689
vlan filter command 2-691
VLAN filters, displaying 2-558
VLAN ID range 2-684
VLAN ID translation
VLAN mapping
configuring 2-658
described 2-659
displaying 2-559
VLAN maps
applying 2-691
creating 2-687
defining 2-247
displaying 2-557
VLAN Query Protocol
VLANs
adding 2-684
configuring 2-684
debug messages, display
activation of B-76
VLAN IOS file system error tests B-75
VLAN manager activity B-74
displaying configurations 2-552
extended-range 2-684
MAC addresses
displaying 2-503
number of 2-490
normal-range 2-684
private 2-643
configuring 2-315
displaying 2-552
restarting 2-564
saving the configuration 2-684
shutting down 2-564
suspending 2-564
VMPS
configuring servers 2-696
displaying 2-561
error recovery timer 2-105
reconfirming dynamic VLAN assignments 2-693
vmps reconfirm (global configuration) command 2-694
vmps reconfirm (privileged EXEC) command 2-693
vmps retry command 2-695
vmps server command 2-696
VQP
and dynamic-access ports 2-632
clearing client statistics 2-58
displaying information 2-561
per-server retry count 2-695
reconfirmation interval 2-694
reconfirming dynamic VLAN assignments 2-693
VTP, enabling tunneling for 2-207
W
Weighted Tail Drop
WTD, queue-limit command 2-320