Restrictions for Perpetual and Fast PoE
The following restrictions apply to perpetual and fast PoE :
Configuration of Fast PoE or Perpetual PoE has to be done before physically connecting any endpoint. Alternatively do a manual shut/no-shut of the ports drawing power.
Power to the ports will be interrupted in case of MCU firmware upgrade and ports will be back up immediately after the upgrade.
The CREE light powered device (PD) may flap at regular intervals if not configured with IP assigned from the DHCP server.
If the PD doesn’t support LLDP user can configure with either static or 2-event to receive required power as per the PD specification.