The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Python is an easy to learn, powerful programming language. It has efficient high-level data structures and a simple but effective approach to object-oriented programming. Python's elegant syntax and dynamic typing, together with its interpreted nature, make it an ideal language for scripting and rapid application development in many areas on most platforms.
The Python interpreter and the extensive standard library are freely available in source or binary form for all major platforms from the Python website:
http://www.python.org/
The same site also contains distributions of and pointers to many free third-party Python modules, programs and tools, and additional documentation.
The Cisco Nexus Series devices support Python v2.7.5 in both interactive and non-interactive (script) modes and is available in the Guest Shell.
The Python scripting capability gives programmatic access to the device's command-line interface (CLI) to perform various tasks and PowerOn Auto Provisioning (POAP) or Embedded Event Manager (EEM) actions. Python can also be accessed from the Bash shell.
The Python interpreter is available in the Cisco NX-OS software.
This section describes how to write and execute Python scripts.
Cisco NX-OS provides a Cisco Python package that enables access to many core network device modules, such as interfaces, VLANs, VRFs, ACLs and routes. You can display the details of the Cisco Python package by entering the help() command. To obtain additional information about the classes and methods in a module, you can run the help command for a specific module. For example, help(cisco.interface) displays the properties of the cisco.interface module.
The following is an example of how to display information about the Cisco python package:
>>> import cisco >>> help(cisco) Help on package cisco: NAME cisco FILE /isan/python/scripts/cisco/__init__.py PACKAGE CONTENTS acl bgp cisco_secret cisco_socket feature interface key line_parser md5sum nxcli ospf routemap routes section_parser ssh system tacacs vrf CLASSES __builtin__.object cisco.cisco_secret.CiscoSecret cisco.interface.Interface cisco.key.Key
The Python programming language uses three APIs that can execute CLI commands. The APIs are available from the Python CLI module.
These APIs are listed in the following table. You need to enable the APIs with the from cli import * command. The arguments for these APIs are strings of CLI commands. To execute a CLI command through the Python interpreter, you enter the CLI command as an argument string of one of the following APIs:
API |
Description |
||
---|---|---|---|
cli()
Example: string = cli (“cli-command”) |
Returns the raw output of CLI commands, including control/special characters.
|
||
clid()
Example: json_string = clid (“cli-command”) |
Returns JSON output for cli-command, if XML support exists for the command, otherwise an exception is thrown.
|
||
clip()
Example: clip (“cli-command”) |
Prints the output of the CLI command directly to stdout and returns nothing to Python.
|
When two or more commands are run individually, the state is not persistent from one command to subsequent commands.
In the following example, the second command fails because the state from the first command does not persist for the second command:
>>> cli("conf t") >>> cli("interface eth4/1")
When two or more commands are run together, the state is persistent from one command to subsequent commands.
In the following example, the second command is successful because the state persists for the second and third commands:
>>> cli("conf t ; interface eth4/1 ; shut")
Note | Commands are separated with " ; " as shown in the example. (The ; must be surrounded with single blank characters.) |
The following example shows how to invoke Python from the CLI:
Note | The Python interpreter is designated with the ">>>" or "…" prompt. |
switch# python Python 2.7.5 (default, Oct 8 2013, 23:59:43) [GCC 4.6.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> from cli import * >>> import json >>> cli('configure terminal ; interface loopback 5 ; no shut') '' >>> intflist=json.loads(clid('show interface brief')) >>> i=0 >>> while i < len(intflist['TABLE_interface']['ROW_interface']): ... intf=intflist['TABLE_interface']['ROW_interface'][i] ... i=i+1 ... if intf['state'] == 'up': ... print intf['interface'] ... mgmt0 Ethernet2/7 Ethernet4/7 loopback0 loopback5 >>>
The following examples show various display formats using the Python APIs:
Example 1:
>>> from cli import * >>> cli("conf ; interface loopback 1") '' >>> clip('where detail') mode: username: admin vdc: switch routing-context vrf: default
Example 2:
>>> from cli import * >>> cli("conf ; interface loopback 1") '' >>> cli('where detail') ' mode: \n username: admin\n vdc: switch\n routing-context vrf: default\n' >>>
Example 3:
>>> from cli import * >>> cli("conf ; interface loopback 1") '' >>> r = cli('where detail') ; print r mode: username: admin vdc: EOR-1 routing-context vrf: default >>>
Example 4:
>>> from cli import * >>> import json >>> out=json.loads(clid('show version')) >>> for k in out.keys(): ... print "%30s = %s" % (k, out[k]) ... kern_uptm_secs = 6 kick_file_name = bootflash:///n9000-dk9.6.1.2.I1.1.bin rr_service = None module_id = Supervisor Module kick_tmstmp = 10/21/2013 00:06:10 bios_cmpl_time = 08/17/2013 bootflash_size = 20971520 kickstart_ver_str = 6.1(2)I1(2) [build 6.1(2)I1(2)] [gdb] kick_cmpl_time = 10/20/2013 4:00:00 chassis_id = Nexus9000 C9508 (8 Slot) Chassis proc_board_id = SAL171211LX memory = 16077872 manufacturer = Cisco Systems, Inc. kern_uptm_mins = 26 bios_ver_str = 06.14 cpu_name = Intel(R) Xeon(R) CPU E5-2403 kern_uptm_hrs = 2 rr_usecs = 816550 rr_sys_ver = None rr_reason = Reset Requested by CLI command reload rr_ctime = Mon Oct 21 00:10:24 2013 header_str = Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. host_name = switch mem_type = kB kern_uptm_days = 0 >>>
A Python script can run in non-interactive mode by providing the Python script name as an argument to the Python CLI command. Python scripts must be placed under the bootflash or volatile scheme. A maximum of 32 command line arguments for the Python script are allowed with the Python CLI command.
The Cisco Nexus Series device also supports the source CLI command for running Python scripts. The bootflash:scripts directory is the default script directory for the source CLI command.
The following example shows a script and how to run it:
switch# show file bootflash:deltaCounters.py #!/isan/bin/python from cli import * import sys, time ifName = sys.argv[1] delay = float(sys.argv[2]) count = int(sys.argv[3]) cmd = 'show interface ' + ifName + ' counters' out = json.loads(clid(cmd)) rxuc = int(out['TABLE_rx_counters']['ROW_rx_counters'][0]['eth_inucast']) rxmc = int(out['TABLE_rx_counters']['ROW_rx_counters'][1]['eth_inmcast']) rxbc = int(out['TABLE_rx_counters']['ROW_rx_counters'][1]['eth_inbcast']) txuc = int(out['TABLE_tx_counters']['ROW_tx_counters'][0]['eth_outucast']) txmc = int(out['TABLE_tx_counters']['ROW_tx_counters'][1]['eth_outmcast']) txbc = int(out['TABLE_tx_counters']['ROW_tx_counters'][1]['eth_outbcast']) print 'row rx_ucast rx_mcast rx_bcast tx_ucast tx_mcast tx_bcast' print '=========================================================' print ' %8d %8d %8d %8d %8d %8d' % (rxuc, rxmc, rxbc, txuc, txmc, txbc) print '=========================================================' i = 0 while (i < count): time.sleep(delay) out = json.loads(clid(cmd)) rxucNew = int(out['TABLE_rx_counters']['ROW_rx_counters'][0]['eth_inucast']) rxmcNew = int(out['TABLE_rx_counters']['ROW_rx_counters'][1]['eth_inmcast']) rxbcNew = int(out['TABLE_rx_counters']['ROW_rx_counters'][1]['eth_inbcast']) txucNew = int(out['TABLE_tx_counters']['ROW_tx_counters'][0]['eth_outucast']) txmcNew = int(out['TABLE_tx_counters']['ROW_tx_counters'][1]['eth_outmcast']) txbcNew = int(out['TABLE_tx_counters']['ROW_tx_counters'][1]['eth_outbcast']) i += 1 print '%-3d %8d %8d %8d %8d %8d %8d' % \ (i, rxucNew - rxuc, rxmcNew - rxmc, rxbcNew - rxbc, txucNew - txuc, txmcNew - txmc, txbcNew - txbc) switch# python bootflash:deltaCounters.py Ethernet1/1 1 5 row rx_ucast rx_mcast rx_bcast tx_ucast tx_mcast tx_bcast ========================================================= 0 791 1 0 212739 0 ========================================================= 1 0 0 0 0 26 0 2 0 0 0 0 27 0 3 0 1 0 0 54 0 4 0 1 0 0 55 0 5 0 1 0 0 81 0 switch#
The following example shows how a source command specifies command-line arguments. In the example, policy-map is an argument to the cgrep python script. The example also shows that a source command can follow after the pipe operator ("|").
switch# show running-config | source sys/cgrep policy-map policy-map type network-qos nw-pfc policy-map type network-qos no-drop-2 policy-map type network-qos wred-policy policy-map type network-qos pause-policy policy-map type qos foo policy-map type qos classify policy-map type qos cos-based policy-map type qos no-drop-2 policy-map type qos pfc-tor-port
On Cisco Nexus Series devices, embedded event manager (EEM) policies support Python scripts.
The following example shows how to run a Python script as an EEM action:
switch# show running-config eem !Command: show running-config eem !Time: Sun May 1 14:40:07 2011 version 6.1(2)I2(1) event manager applet a1 event cli match "show clock" action 1 cli python bootflash:pydate.py action 2 event-default
switch# show file logflash:event_archive_1 | last 33 eem_event_time:05/01/2011,19:40:28 event_type:cli event_id:8 slot:active(1) vdc:1 severity:minor applets:a1 eem_param_info:command = "exshow clock" Starting with policy a1 Python 2011-05-01 19:40:28.644891 Executing the following commands succeeded: python bootflash:pydate.py PC_VSH_CMD_TLV(7679) with q
On Cisco Nexus Series devices, Python is integrated with the underlying Cisco NX-OS network interfaces. You can switch from one virtual routing context to another by setting up a context through the cisco.vrf.set_global_vrf() API.
The following example shows how to retrieve an HTML document over the management interface of a device. You can also establish a connection to an external entity over the inband interface by switching to a desired virtual routing context.
switch# python Python 2.7.5 (default, Oct 8 2013, 23:59:43) [GCC 4.6.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import urllib2 >>> from cisco.vrf import * >>> set_global_vrf('management') >>> page=urllib2.urlopen('http://172.23.40.211:8000/welcome.html') >>> print page.read() Hello Cisco Nexus 9000 >>> >>> import cisco >>> help(cisco.vrf.set_global_vrf) Help on function set global vrf in module cisco.vrf: set global vrf(vrf) Sets the global vrf. Any new sockets that are created (using socket.socket) will automatically get set to this vrf (including sockets used by other python libraries). Arguments: vrf: VRF name (string) or the VRF ID (int). Returns: Nothing >>>
Cisco NX-OS resources are protected by the Cisco NX-OS Sandbox layer of software and by the CLI role-based access control (RBAC).
All users associated with a Cisco NX-OS network-admin or dev-ops role are privileged users. Users who are granted access to Python with a custom role are regarded as non-privileged users. Non-privileged users have a limited access to Cisco NX-OS resources, such as file system, guest shell, and Bash commands. Privileged users have greater access to all the resources of Cisco NX-OS.
The following example shows how a privileged user runs commands:
switch# python Python 2.7.5 (default, Oct 8 2013, 23:59:43) [GCC 4.6.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import os >>> os.system('whoami') admin 0 >>> f=open('/tmp/test','w') >>> f.write('hello from python') >>> f.close() >>> r=open('/tmp/test','r') >>> print r.read() hello from python >>> r.close()
The following example shows a non-privileged user being denied access:
switch# python Python 2.7.5 (default, Oct 8 2013, 23:59:43) [GCC 4.6.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import os >>> os.system('whoami') system(whoami): rejected! -1 >>> f=open('/tmp/test','r') Permission denied. Traceback (most recent call last): File "<stdin>", line 1, in <module> IOError: [Errno 13] Permission denied: '/tmp/test' >>>
RBAC controls CLI access based on the login user privileges. A login user's identity is given to Python that is invoked from the CLI shell or from Bash. Python passes the login user's identity to any subprocess that is invoked from Python.
The following is an example for a privileged user:
>>> from cli import * >>> cli('show clock') '11:28:53.845 AM UTC Sun May 08 2011\n' >>> cli('configure terminal ; vrf context myvrf') '' >>> clip('show running-config l3vm') !Command: show running-config l3vm !Time: Sun May 8 11:29:40 2011 version 6.1(2)I2(1) interface Ethernet1/48 vrf member blue interface mgmt0 vrf member management vrf context blue vrf context management vrf context myvrf
The following is an example for a non-privileged user:
>>> from cli import * >>> cli('show clock') '11:18:47.482 AM UTC Sun May 08 2011\n' >>> cli('configure terminal ; vrf context myvrf2') Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/isan/python/scripts/cli.py", line 20, in cli raise cmd_exec_error(msg) errors.cmd_exec_error: '% Permission denied for the role\n\nCmd exec error.\n'
The following example shows an RBAC configuration:
switch# show user-account user:admin this user account has no expiry date roles:network-admin user:pyuser this user account has no expiry date roles:network-operator python-role switch# show role name python-role
The following example shows a Python script that is running the script with the scheduler feature:
#!/bin/env python from cli import * from nxos import * import os switchname = cli("show switchname") try: user = os.environ['USER'] except: user = "No user" pass msg = user + " ran " + __file__ + " on : " + switchname print msg py_syslog(1, msg) # Save this script in bootflash:///scripts
switch# conf t Enter configuration commands, one per line. End with CNTL/Z. switch(config)# feature scheduler switch(config)# scheduler job name testplan switch(config-job)# python bootflash:///scripts/testplan.py switch(config-job)# exit switch(config)# scheduler schedule name testplan switch(config-schedule)# job name testplan switch(config-schedule)# time start now repeat 0:0:4 Schedule starts from Mon Mar 14 16:40:03 2011 switch(config-schedule)# end switch# term mon 2011 Mar 14 16:38:03 switch %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by admin on 10.19.68.246@pts/2 switch# show scheduler schedule Schedule Name : testplan ------------------------------ User Name : admin Schedule Type : Run every 0 Days 0 Hrs 4 Mins Start Time : Mon Mar 14 16:40:03 2011 Last Execution Time : Yet to be executed ----------------------------------------------- Job Name Last Execution Status ----------------------------------------------- testplan -NA- ============================================================================== switch# switch# 2011 Mar 14 16:40:04 switch %USER-1-SYSTEM_MSG: No user ran /bootflash/scripts/testplan.py on : switch - nxpython 2011 Mar 14 16:44:04 switch last message repeated 1 time switch#