New and Changed Information

This chapter provides release-specific information for each new and changed feature in this release of the Cisco Nexus 3548 Switch NX-OS Unicast Routing Configuration Guide. The latest version of this document is available at the following Cisco website:

http://www.cisco.com/c/en/us/support/switches/nexus-3000-series-switches/products-installation-and-configuration-guides-list.html

To check for additional information, see the Cisco Nexus 3548 Switch NX-OS Release Notes for this release, which are available at the following Cisco website:

http://www.cisco.com/c/en/us/support/switches/nexus-3000-series-switches/products-release-notes-list.html

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 3548 Switch NX-OS Unicast Routing Configuration Guide, Release 9.2(x) and tells you where they are documented.

Table 1. New and Changed Feature Information

Feature

Description

Changed in Release

Where Documented

Changed the document title from 9.x to 9.2(x)

Title page

BGP best-path algorithm

Added the option to ignore the Interior Gateway Protocol (IGP) metric for next hop during best-path selection.

9.2(2)

Tuning BGP

Unicast routing

No updates since Cisco NX-OS Release 7.x

 9.2(1)