Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide, Release 10.1(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 21, 2020

Platform Support for Layer 2

This chapter defines platform support for features that are not supported across the entire suite of Cisco Nexus platforms.

Platform Support for Layer-2

The following table describes platform support for features that are not supported across the entire suite of Cisco Platforms. You should refer to each release's installation guide and release notes for details about the platforms supported in the initial product release.

Feature	Supported Platform(s) or Line Cards	First Supported Release	Platform Exceptions
MAC address tables (disabling and re-enabling MAC addresslearning).	Cisco Nexus 3232C, Cisco Nexus 3264Q, and Cisco Nexus 3164Q Series switches.	Cisco NX-OS Release 7.0(3)I7(3)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)