Preface

This preface describes the audience, organization, and conventions of the Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide. It also provides information on how to obtain related documentation.

Audience

This publication is for experienced network administrators who configure and maintain Cisco NX-OS software.

Document Organization

This document is organized into the following chapters:

Chapter

Description
   
Overview Describes the Layer 2 documented features.
Configuring Ethernet Interfaces Provides information about Ethernet interfaces and describes configuration procedures.
Configuring VLANs Provides details on configuring VLANs.
Configuring Private VLANs Provides information on configuring private VLANs.
Configuring Access and Trunk Interfaces Provides information about access ports or trunk ports and describes configuration procedures.
Configuring EtherChannels Provides information about EtherChannels, compatibility requirements, and configuration information.
   
Configuring Rapid PVST+ Provides information on IEEE 802.1D STP and complete details for configuring Rapid PVST+.
Configuring Multiple Spanning Tree Provides complete information on configuring MST.
Configuring STP Extensions Provides details on configuring the Cisco-proprietary STP extensions Bridge Assurance, BPDU Guard, BPDU Filtering, Loop Guard, Root Guard, and PVST Simulation.

Configuring Link Layer Discovery Protocol

 Provides information to configure the Link Layer Discovery Protocol (LLDP).
Configuring the MAC Address Table Provides information about MAC addresses, how to configure static MAC addresses, and how to update the MAC address table.
Configuring IGMP Snooping Provides information about IGMPv1, IGMPv2, and IGMPv3 and describes how to configure IGMP snooping parameters.
Configuring Traffic Storm Control Provides information about traffic storm control, guidelines and limitations, and how to configure the traffic storm control settings.

Document Conventions

Command descriptions use the following conventions:

Convention Description
bold

Bold text indicates the commands and keywords that you enter literally as shown.
Italic

Italic text indicates arguments for which the user supplies the values.
[x]

Square brackets enclose an optional element(keyword or argument).
[x | y]

Square brackets enclosing keywords or arguments separated by a vertical bar indicate an optional choice.
{x | y}

Braces enclosing keywords or arguments separated by a vertical bar indicate a required choice.
[x {y | z}]

Nested set of square brackets or braces indicate optional or required choices within optional or required elements. Braces and a vertical bar within square brackets indicate a required choice within an optional element.
variable

Indicates a variable for which you supply values, in context where italics cannot be used.
string A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

Examples use the following conventions:

Convention Description
screen font

Terminal sessions and information the switch displays are in screen font.
boldface screen font

Information you must enter is in boldface screen font.
italic screen font

Arguments for which you supply values are in italic screen font.
< >

Nonprinting characters, such as passwords, are in angle brackets.
[ ]

Default responses to system prompts are in square brackets.
!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.

This document uses the following conventions:


Note

Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.


Caution

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Related Documentation for Nexus 3000 Series NX-OS Software

Cisco NX-OS documentation is available at the following URL:

http:/​/​www.cisco.com/​en/​US/​products/​ps11541/​tsd_​products_​support_​series_​home.html

The documentation set for the Cisco Nexus 3000 Series NX-OS software includes the following documents:

Release Notes

  • Cisco Nexus 3000 Series Switch Release Notes

Cisco NX-OS documentation is available at the following URL:

http:/​/​www.cisco.com/​en/​US/​products/​ps9670/​tsd_​products_​support_​series_​home.htmll

The documentation set for the Cisco Nexus 3000 Series NX-OS software includes the following documents:

Configuration Guides

  • Cisco Nexus 3000 Series NX-OS Configuration Limits

  • Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide

  • Cisco Nexus 3000 Series NX-OS Fundamentals Configuration Guide

  • Cisco Nexus 3000 Series NX-OS System Management Configuration Guide

  • Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide

  • Cisco Nexus 3000 Series NX-OS Multicast Configuration Guide

Installation and Upgrade Guides

  • Cisco Nexus 3000 Series Hardware Installation Guide

  • Regulatory Compliance and Safety Information for the Cisco Nexus 3000 Series Switches

Licensing Guide

  • Cisco NX-OS Licensing Guide

Command References

  • Cisco Nexus 3000 Series Command Reference

Technical References

  • Cisco Nexus 3000 Series MIBs Reference

Error and System Messages

  • Cisco NX-OS System Messages Reference

Troubleshooting Guide

  • Cisco Nexus 3000 Series Troubleshooting Guide

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http:/​/​www.cisco.com/​en/​US/​docs/​general/​whatsnew/​whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.