Cisco Nexus 3000 Series NX-OS Fundamentals Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 24, 2014

Chapter: New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3000 Series NX-OS Fundamentals Command Reference. The latest version of this document is available at the following Cisco website:

http://www.cisco.com/en/US/products/ps11541/tsd_products_support_series_home.html

To check for additional information about this Cisco NX-OS Release, see the Cisco Nexus 3000 Series Switch Release Notes available at the following Cisco website:

http://www.cisco.com/en/US/products/ps11541/prod_release_notes_list.html

Table 1 summarizes the new and changed features for Cisco NX-OS Release 6.x and tells you where they are documented.

Table 1 New and Changed Information for Release 6.x
Feature	Description	Changed in Release	Where Documented
Reload-tracker	Two new commands show system config reload-pending and system config reload-pending syslog-interval are introduced.	6.0(2)U6(7)	show system config reload-pending system config reload-pending syslog-interval
Fan details	The output for the show environment fan details command has changed.	7.0(3)I2(1)	show environment
Booting the N3000 platform	A single image binary is now used for booting the Cisco Nexus 3000 platform. Kickstart and system images are no longer used.	7.0(3)I2(1)	boot fast-reload
show tech-support	The command was enhanced to include the additional sub-options: biosd, bloggerd, and bloggerd-all. The show tech-support bcm-usd command is displayed after entering the attach module <module number> command	7.0(3)I2(1)	show tech-support
Show processes memory	Starting with Release 7.0(3)\|2(1), the StkSize, RSSMem, and LibMem columns are no longer displayed in the table for memory allocation processes.	7.0(3)\|2(1)	show processes memory
show tech-support	The command was enhanced to include output of the show policy-map int control-plane and show interface ethernet slot/port transceiver details commands.	6.0(2)U5(1)	show tech-support
Fast Reload	Added the fast-reload command.	6.0(2)U2(1)	fast-reload
Copy file start support	Added support for running the configuration file on startup.	6.0(2)U2(1)	copy

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)